Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight wagons

Filter products
H0 Covered Freight Car Gmhs35 "Bosch" DB
Brawa 51191 Scale H0
H0 Covered Freight Car Gmhs35 "Bosch" DB

Prototype Bosch was founded in Stuttgart in 1886 by Robert Bosch. Initially, the company focused on the manufacture of electrical engineering and automotive parts. Even in its early years, Bosch developed innovative products, including spark plugs for cars. Over time, the company expanded worldwide and became one of the leading suppliers of automotive technology, industrial electronics, and household appliances. Today, Bosch is known for its quality, innovations, and its role as a major global technology group. The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Glms201 DB
Brawa 51193 Scale H0
H0 Covered Freight Car Glms201 DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Nm K.P.E.V.
Brawa 51242 Scale H0
H0 Covered Freight Car Nm K.P.E.V.

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gm K.Sächs.Sts.E.B.
Brawa 51243 Scale H0
H0 Covered Freight Car Gm K.Sächs.Sts.E.B.

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gm GOS
Brawa 51244 Scale H0
H0 Covered Freight Car Gm GOS

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DRG
Brawa 51245 Scale H0
H0 Covered Freight Car G DRG

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DRG
Brawa 51246 Scale H0
H0 Covered Freight Car G DRG

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G 02 "Brake Carriage" DB
Brawa 51247 Scale H0
H0 Covered Freight Car G 02 "Brake Carriage" DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G10 DB
Brawa 51248 Scale H0
H0 Covered Freight Car G10 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G10 DB
Brawa 51249 Scale H0
H0 Covered Freight Car G10 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DR
Brawa 51250 Scale H0
H0 Covered Freight Car G DR

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G ÖBB
Brawa 51251 Scale H0
H0 Covered Freight Car G ÖBB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Z CSD
Brawa 51252 Scale H0
H0 Covered Freight Car Z CSD

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gklm191 DB
Brawa 51253 Scale H0
H0 Covered Freight Car Gklm191 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car (Gw) G DR
Brawa 51254 Scale H0
H0 Covered Freight Car (Gw) G DR

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Dortmunder Union" DB
Brawa 51255 Scale H0
H0 Beer Car "Dortmunder Union" DB

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Adler-Brauerei Bielstein" DRG
Brawa 51256 Scale H0
H0 Beer Car "Adler-Brauerei Bielstein" DRG

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Bières de Colmar" A.L.
Brawa 51257 Scale H0
H0 Beer Car "Bières de Colmar" A.L.

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Brasserie Meteor" SNCF
Brawa 51258 Scale H0
H0 Beer Car "Brasserie Meteor" SNCF

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Paderborner Bier" DR, Brit-US-Zone
Brawa 51259 Scale H0
H0 Beer Car "Paderborner Bier" DR, Brit-US-Zone

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "De Gekroonde Valk" NS
Brawa 51262 Scale H0
H0 Beer Car "De Gekroonde Valk" NS

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Königl. Mineralbrunnen Fachingen" K.P.E.V.
Brawa 51263 Scale H0
H0 Beer Car "Königl. Mineralbrunnen Fachingen" K.P.E.V.

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Palmin" DRG
Brawa 51264 Scale H0
H0 Beer Car "Palmin" DRG

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car GGrhs DR
Brawa 51266 Scale H0
H0 Covered Freight Car GGrhs DR

Prototype In the early 1950s, the Association of Publicly Owned Enterprises for Locomotive and Wagon Construction in the GDR (VVB LOWA) began updating the GGths Bromberg goods wagon to facilitate the transport of large quantities of grain in closed goods wagons. Following the production of three prototypes in 1952, mass production of the new GGts goods wagons commenced in 1954. These wagons retained many features of the GGths Bromberg, such as loading hatches, roof walkways and unloading chutes integrated into the doors. However, the doors were now designed to be tightly sealed, eliminating the need for additional planks to prevent cargo loss. The door width was reduced to 1.5 metres, as these wagons were primarily intended for grain transport and rarely used for other purposes. To optimise the load volume relative to payload, the wagons were also shorter than the GGths Bromberg. Between 1954 and 1957, LOWA factories produced a total of 1,655 GGrhs15-30 wagons. As is typical with large production runs, there were variations in features such as the arrangement of roof walkways, unloading hatches and braking systems (including parking brakes, handbrakes and brakeman’s cabs) due to manufacturing differences and subsequent modifications. In operation, these new wagons fully met expectations. After four decades of service, the last examples were retired from regular operations in 1994, although some remained in use as railway maintenance cars. Model True to original frame construction Precise replica of board joints Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Precise paintwork and painting Individually mounted axle box cover Variants with and without handbrakes Different versions of the roof runs

Regular price: CHF 54.05

On order, shipped within 10-15 days