Freight wagons
Prototype By the middle of the 1960s, DB procured numerous special wagons with a sliding roof and sliding walls. However, examinations proved that, in many cases, it was possible to forego the opening roof and that an optimized access from the side was sufficient for the majority of cargoes. Consequently, the Hbis 299 which was still initially called the Klmmgs was built from 1966 onwards. To a large extent, the design corresponded to the previously built Tbis 869 sliding roof wagons; the accessibility to the corner was primarily improved. The centre column only had a width of 320 mm; this width amounted to 1000 mm on the sliding roof wagons. The wagons proved themselves in operation and were accepted by the loaders. 2,950 units had already been built by 1970 and the maximum quantity of 8,444 units was reached in 1975. From 1974 onwards, the wagons were equipped with spark arrestor plate ex works; a percentage of the older wagons were retrofitted with this component. From 1984 onwards, they obtained the national secondary genre letters –ww. Approximately half of the built wagons were equipped with the “Daberkow” transport protection equipment system.They became Hbis-t from 1979 onwards and became Hbils from 1984 onwards. However, all of the transport protection equipment was remoted from the mid-1980s. In return, 754 wagons obtained reinforced, lockable separating walls in 1991 and, from that point on, were given the designation Hbills-x. In 1994, DB AG assumed 8,403 BA 299 wagons of all types. In 2000, 2,500 wagons were still being operated by “Railion”, the Hbis-ww accounts for the largest share with approx. 2,700 wagons. Eight years later, just over 1,000 Hbis-ww and 90 Hbillsx were still being kept for goods traffic. In association with newer sliding wall carriages, they are now particularly striking thanks to their almost delicate appearance. The original color was unpainted aluminium and the undercarriage was black. This lead to the development of all shades of contamination conditions during operation; address fields are bright or dark shadowed and even both in some cases in the event of a new lettering. To some extent, rented wagons contained the advertising lettering of the adjuster. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems Metal axle holders Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype By the middle of the 1960s, DB procured numerous special wagons with a sliding roof and sliding walls. However, examinations proved that, in many cases, it was possible to forego the opening roof and that an optimized access from the side was sufficient for the majority of cargoes. Consequently, the Hbis 299 which was still initially called the Klmmgs was built from 1966 onwards. To a large extent, the design corresponded to the previously built Tbis 869 sliding roof wagons; the accessibility to the corner was primarily improved. The centre column only had a width of 320 mm; this width amounted to 1000 mm on the sliding roof wagons. The wagons proved themselves in operation and were accepted by the loaders. 2,950 units had already been built by 1970 and the maximum quantity of 8,444 units was reached in 1975. From 1974 onwards, the wagons were equipped with spark arrestor plate ex works; a percentage of the older wagons were retrofitted with this component. From 1984 onwards, they obtained the national secondary genre letters –ww. Approximately half of the built wagons were equipped with the “Daberkow” transport protection equipment system.They became Hbis-t from 1979 onwards and became Hbils from 1984 onwards. However, all of the transport protection equipment was remoted from the mid-1980s. In return, 754 wagons obtained reinforced, lockable separating walls in 1991 and, from that point on, were given the designation Hbills-x. In 1994, DB AG assumed 8,403 BA 299 wagons of all types. In 2000, 2,500 wagons were still being operated by “Railion”, the Hbis-ww accounts for the largest share with approx. 2,700 wagons. Eight years later, just over 1,000 Hbis-ww and 90 Hbillsx were still being kept for goods traffic. In association with newer sliding wall carriages, they are now particularly striking thanks to their almost delicate appearance. The original color was unpainted aluminium and the undercarriage was black. This lead to the development of all shades of contamination conditions during operation; address fields are bright or dark shadowed and even both in some cases in the event of a new lettering. To some extent, rented wagons contained the advertising lettering of the adjuster. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems Metal axle holders Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype By the middle of the 1960s, DB procured numerous special wagons with a sliding roof and sliding walls. However, examinations proved that, in many cases, it was possible to forego the opening roof and that an optimized access from the side was sufficient for the majority of cargoes. Consequently, the Hbis 299 which was still initially called the Klmmgs was built from 1966 onwards. To a large extent, the design corresponded to the previously built Tbis 869 sliding roof wagons; the accessibility to the corner was primarily improved. The centre column only had a width of 320 mm; this width amounted to 1000 mm on the sliding roof wagons. The wagons proved themselves in operation and were accepted by the loaders. 2,950 units had already been built by 1970 and the maximum quantity of 8,444 units was reached in 1975. From 1974 onwards, the wagons were equipped with spark arrestor plate ex works; a percentage of the older wagons were retrofitted with this component. From 1984 onwards, they obtained the national secondary genre letters –ww. Approximately half of the built wagons were equipped with the “Daberkow” transport protection equipment system.They became Hbis-t from 1979 onwards and became Hbils from 1984 onwards. However, all of the transport protection equipment was remoted from the mid-1980s. In return, 754 wagons obtained reinforced, lockable separating walls in 1991 and, from that point on, were given the designation Hbills-x. In 1994, DB AG assumed 8,403 BA 299 wagons of all types. In 2000, 2,500 wagons were still being operated by “Railion”, the Hbis-ww accounts for the largest share with approx. 2,700 wagons. Eight years later, just over 1,000 Hbis-ww and 90 Hbillsx were still being kept for goods traffic. In association with newer sliding wall carriages, they are now particularly striking thanks to their almost delicate appearance. The original color was unpainted aluminium and the undercarriage was black. This lead to the development of all shades of contamination conditions during operation; address fields are bright or dark shadowed and even both in some cases in the event of a new lettering. To some extent, rented wagons contained the advertising lettering of the adjuster. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems Metal axle holders Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype For a long time, tank wagons were unsuitable for the transport of aggressive liquids such as acids. Although boilers equipped with a rubber cladding were available as early as the 1920s, acid wagons were still generally used in order to transport such goods. In doing so, the wagon construction companies used the undercarriage of the standard layout wagon with a wheel base of 4.00 m or 4.50 m and arranged ten or twelve earthenware containers, each with a filling capacity of between 1000 and 1200 L. The containers were held in place using wood and rubber attachments and the box supports were reinforced using diagonal braces. The inclined floor which improved the ability of spilled cargo to flow away was partially cast using a bitumen compound or was protected with a lead sheet. A wooden walkway can be found between the containers. The containers are sealed using rubber or wooden stoppers. A tall bulkhead protects the personnel on the braking platform which is mandatory on the acid wagons. Many small and large chemical companies used such wagons as private wagons at their respective railway directorate. In the FRG, Degussa donated its last acid wagon to the Bochum-Dahlhausen Railway Museum in 1985. Acid wagons were still used at the DR until 1990 and several clubs still own retained wagons such as those in Aschersleben, Magdeburg and Stassfurt. Model Individually mounted signs Bogie with three-point support Precise replica of board joints Wheelsets with inside contours Multi-part brake system Brake blocks in wheel plane Individually mounted axle brake rod Metal axle holders
On order, shipped within 10-15 days
Prototype For a long time, tank wagons were unsuitable for the transport of aggressive liquids such as acids. Although boilers equipped with a rubber cladding were available as early as the 1920s, acid wagons were still generally used in order to transport such goods. In doing so, the wagon construction companies used the undercarriage of the standard layout wagon with a wheel base of 4.00 m or 4.50 m and arranged ten or twelve earthenware containers, each with a filling capacity of between 1000 and 1200 L. The containers were held in place using wood and rubber attachments and the box supports were reinforced using diagonal braces. The inclined floor which improved the ability of spilled cargo to flow away was partially cast using a bitumen compound or was protected with a lead sheet. A wooden walkway can be found between the containers. The containers are sealed using rubber or wooden stoppers. A tall bulkhead protects the personnel on the braking platform which is mandatory on the acid wagons. Many small and large chemical companies used such wagons as private wagons at their respective railway directorate. In the FRG, Degussa donated its last acid wagon to the Bochum-Dahlhausen Railway Museum in 1985. Acid wagons were still used at the DR until 1990 and several clubs still own retained wagons such as those in Aschersleben, Magdeburg and Stassfurt. Model Individually mounted signs Bogie with three-point support Precise replica of board joints Wheelsets with inside contours Multi-part brake system Brake blocks in wheel plane Individually mounted axle brake rod Metal axle holders
On order, shipped within 10-15 days
Prototype For a long time, tank wagons were unsuitable for the transport of aggressive liquids such as acids. Although boilers equipped with a rubber cladding were available as early as the 1920s, acid wagons were still generally used in order to transport such goods. In doing so, the wagon construction companies used the undercarriage of the standard layout wagon with a wheel base of 4.00 m or 4.50 m and arranged ten or twelve earthenware containers, each with a filling capacity of between 1000 and 1200 L. The containers were held in place using wood and rubber attachments and the box supports were reinforced using diagonal braces. The inclined floor which improved the ability of spilled cargo to flow away was partially cast using a bitumen compound or was protected with a lead sheet. A wooden walkway can be found between the containers. The containers are sealed using rubber or wooden stoppers. A tall bulkhead protects the personnel on the braking platform which is mandatory on the acid wagons. Many small and large chemical companies used such wagons as private wagons at their respective railway directorate. In the FRG, Degussa donated its last acid wagon to the Bochum-Dahlhausen Railway Museum in 1985. Acid wagons were still used at the DR until 1990 and several clubs still own retained wagons such as those in Aschersleben, Magdeburg and Stassfurt. Model Individually mounted signs Bogie with three-point support Precise replica of board joints Wheelsets with inside contours Multi-part brake system Brake blocks in wheel plane Individually mounted axle brake rod Metal axle holders
On order, shipped within 10-15 days
Prototype For a long time, tank wagons were unsuitable for the transport of aggressive liquids such as acids. Although boilers equipped with a rubber cladding were available as early as the 1920s, acid wagons were still generally used in order to transport such goods. In doing so, the wagon construction companies used the undercarriage of the standard layout wagon with a wheel base of 4.00 m or 4.50 m and arranged ten or twelve earthenware containers, each with a filling capacity of between 1000 and 1200 L. The containers were held in place using wood and rubber attachments and the box supports were reinforced using diagonal braces. The inclined floor which improved the ability of spilled cargo to flow away was partially cast using a bitumen compound or was protected with a lead sheet. A wooden walkway can be found between the containers. The containers are sealed using rubber or wooden stoppers. A tall bulkhead protects the personnel on the braking platform which is mandatory on the acid wagons. Many small and large chemical companies used such wagons as private wagons at their respective railway directorate. In the FRG, Degussa donated its last acid wagon to the Bochum-Dahlhausen Railway Museum in 1985. Acid wagons were still used at the DR until 1990 and several clubs still own retained wagons such as those in Aschersleben, Magdeburg and Stassfurt. Model Individually mounted signs Bogie with three-point support Precise replica of board joints Wheelsets with inside contours Multi-part brake system Brake blocks in wheel plane Individually mounted axle brake rod Metal axle holders
On order, shipped within 10-15 days
Prototype For a long time, tank wagons were unsuitable for the transport of aggressive liquids such as acids. Although boilers equipped with a rubber cladding were available as early as the 1920s, acid wagons were still generally used in order to transport such goods. In doing so, the wagon construction companies used the undercarriage of the standard layout wagon with a wheel base of 4.00 m or 4.50 m and arranged ten or twelve earthenware containers, each with a filling capacity of between 1000 and 1200 L. The containers were held in place using wood and rubber attachments and the box supports were reinforced using diagonal braces. The inclined floor which improved the ability of spilled cargo to flow away was partially cast using a bitumen compound or was protected with a lead sheet. A wooden walkway can be found between the containers. The containers are sealed using rubber or wooden stoppers. A tall bulkhead protects the personnel on the braking platform which is mandatory on the acid wagons. Many small and large chemical companies used such wagons as private wagons at their respective railway directorate. In the FRG, Degussa donated its last acid wagon to the Bochum-Dahlhausen Railway Museum in 1985. Acid wagons were still used at the DR until 1990 and several clubs still own retained wagons such as those in Aschersleben, Magdeburg and Stassfurt. Model Individually mounted signs Bogie with three-point support Precise replica of board joints Wheelsets with inside contours Multi-part brake system Brake blocks in wheel plane Individually mounted axle brake rod Metal axle holders
On order, shipped within 10-15 days
Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps
On order, shipped within 10-15 days
Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Up to the twenties of the previous century, goods trains of all German railway administrations were operated with manual brakes. In addition to the locomotive personnel, the crew of the train therefore included a chief train conductor as the highest authority, a master packer, train conductor and shunter as well as several brakeman. These persons were responsible for braking the train, for the shunting work during stops en route, and the exchange and processing of freight documents of the transported goods. For this purpose, a special accompanying wagon was carried along behind the locomotive that served as a rolling working and recreation place. Only the brakeman had to stay in one of the brakeman's cabins during the trip. Completing the own development, the KPEV (Royal Prussian Railway Administration) procured luggage wagons ("Pwg") according to master drawing pr IIa 13a for the first time in 1913/14. After the end of World War I, this design was selected as replacement of the old or missing accompanying wagons of the most German Länder railway operators. So, over 7,000 "Pwg" were built according to the 2nd revised edition of the master drawing until 1929 and spread not only in the former KPEV region, but also in Baden, Bavaria, Wuerttemberg, and Saxony. Starting at the end of the thirties, the DRB removed the through-going running boards and handlebars, allegedly due to an attempted robbery of a train. Additional structural alterations even before the outbreak of the war included reinforcements of the wagon body frame and the removal of the window in the storage space door. Model True to original construction differences True to era lighting, e.g. gas or electric lighting True to era roof fittings True to original car bottom Metal axle holders Bogie with three-point support Individually mounted axle box cover Brake blocks in wheel plane Individually mounted axle brake rod Continuous and separate steps Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days
Prototype In order to achieve a larger loading space of 40 m3, the undercarriage and the wheel base of the previous Otmm wagons were extended by 500 mm. The first of these wagons with a capacity of 40 m3 was built by the Paderborn railway repair shop on a trial basis in 1961. The design stood the test, and so the railway repair shops of Kaiserslautern and Weiden built more than 16,000 Otmm 70/Ed 090 wagons between 1961 and 1970, also using profiles of old but usable Omm 37 wagons. The wagons - referred to as Fc 090 from 1980 onwards - ran as single wagons and in block trains with bulk goods of all kinds. A shortage of hinged roof wagons led to the fact that they were also covered with tarpaulins and used for the transport of cereals. Consequently, 1,500 wagons were equipped with hinged roofs in 1978/79 and referred to as Tdgs-z 932. Many other wagons received a load alteration switchover and were referred to as Fcs 090 or, after being adapted for further operation from 1991 onwards, as Fcs 092. In 1994, the DB AG took over even more than 8,500 Fc(s) 090 wagons which were decommissioned until 2007. In 2012, around 2,600 of the Fcs 092 wagons were still in service, another 786 wagons were used as Fcs-x 092 in coal transport. Model Metal axle holders Bogie with three-point support Individually mounted brake system Brake blocks in wheel plane Many separately mounted parts Individually mounted axle box cover Free standing ladders Individually mounted railing Replica of the supports in the funnel
On order, shipped within 10-15 days