Freight wagons
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Württemberg version of this Gm car was built from 1907. Altogether 1,813 units were produced at different waggon factories until 1911. The characteristic of the Württemberg cars was the subdivision of the side panels into 8 segments and the steel waggon door. The undercarriages had an additional fish-bellied girder. These Württemberg cars only existed without a handbrake. After the First World War, numerous cars of this construction type came to the DRG where they were classified in the Hannover class district. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Many separately mounted parts Precise replica of board joints Metal axles Individually mounted brake systems
On order, shipped within 10-15 days
Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Precise replica of board joints True to original frame construction Metal axles
On order, shipped within 10-15 days
Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Precise replica of board joints True to original frame construction Metal axles
On order, shipped within 10-15 days
Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Metal wheelsets Precise paintwork and painting Metal axle Precise replica of board joints True to original frame construction Metal axles
On order, shipped within 10-15 days
Prototype The introduction of welding technology from 1933 onwards increasingly made the Deutsche Reichsbahn (DR) switch to joining the components of their wagons by welding instead of riveting. One of the main advantages of welding technology was the weight saving which could then be used for increasing the cargo weight. In order to respond to the demand for higher speeds in part-load traffic as well, the DR developed the "Gs Oppeln", starting in 1936. Due to its wheel base of 6000mm, its maximum permissible speed could be fixed at 90 km/h. In addition to the missing junction plates that were made superfluous by the welding technology, this wagon type mainly differed in the pointed truss frame required due to the long wheel base. The increasing need for goods wagons due to the war led to the mass production of the "Gs Oppeln" from 1938 onwards. As a result, about 28,000 wagons without and 6,100 wagons with handbrake were built in the following years. Many of the wagons were equipped with a steam heating or even an electric heating system and could therefore be used as part-load wagons in semi-fast and express trains without any problems. After the end of World War II, the wagons were distributed all over Europe and could be found, for example, in the service of the railway administrations of Austria, Czechoslovakia, Poland, or Belgium. The reorganisation of the vehicle numbers of the young Deutsche Bundesbahn in the early fifties of the last century led to the change of "Gs Oppeln" into "Gms 30". Some of the wagons even came into the EUROP wagon pool, thus serving on an international basis. With the emergence of the first newly built goods wagons at the end of the fifties, a decision was made against an expensive general overhaul of the wagons. When the UIC numbering system was introduced, the existing wagons were re-numbered into "Glms 200", and some of them survived until 1979. Model Metal axle bearing Bogie with three-point support True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails Individually mounted steps Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The introduction of welding technology from 1933 onwards increasingly made the Deutsche Reichsbahn (DR) switch to joining the components of their wagons by welding instead of riveting. One of the main advantages of welding technology was the weight saving which could then be used for increasing the cargo weight. In order to respond to the demand for higher speeds in part-load traffic as well, the DR developed the "Gs Oppeln", starting in 1936. Due to its wheel base of 6000mm, its maximum permissible speed could be fixed at 90 km/h. In addition to the missing junction plates that were made superfluous by the welding technology, this wagon type mainly differed in the pointed truss frame required due to the long wheel base. The increasing need for goods wagons due to the war led to the mass production of the "Gs Oppeln" from 1938 onwards. As a result, about 28,000 wagons without and 6,100 wagons with handbrake were built in the following years. Many of the wagons were equipped with a steam heating or even an electric heating system and could therefore be used as part-load wagons in semi-fast and express trains without any problems. After the end of World War II, the wagons were distributed all over Europe and could be found, for example, in the service of the railway administrations of Austria, Czechoslovakia, Poland, or Belgium. The reorganisation of the vehicle numbers of the young Deutsche Bundesbahn in the early fifties of the last century led to the change of "Gs Oppeln" into "Gms 30". Some of the wagons even came into the EUROP wagon pool, thus serving on an international basis. With the emergence of the first newly built goods wagons at the end of the fifties, a decision was made against an expensive general overhaul of the wagons. When the UIC numbering system was introduced, the existing wagons were re-numbered into "Glms 200", and some of them survived until 1979. Model Metal axle bearing Bogie with three-point support True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails Individually mounted steps Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype The introduction of welding technology from 1933 onwards increasingly made the Deutsche Reichsbahn (DR) switch to joining the components of their wagons by welding instead of riveting. One of the main advantages of welding technology was the weight saving which could then be used for increasing the cargo weight. In order to respond to the demand for higher speeds in part-load traffic as well, the DR developed the "Gs Oppeln", starting in 1936. Due to its wheel base of 6000mm, its maximum permissible speed could be fixed at 90 km/h. In addition to the missing junction plates that were made superfluous by the welding technology, this wagon type mainly differed in the pointed truss frame required due to the long wheel base. The increasing need for goods wagons due to the war led to the mass production of the "Gs Oppeln" from 1938 onwards. As a result, about 28,000 wagons without and 6,100 wagons with handbrake were built in the following years. Many of the wagons were equipped with a steam heating or even an electric heating system and could therefore be used as part-load wagons in semi-fast and express trains without any problems. After the end of World War II, the wagons were distributed all over Europe and could be found, for example, in the service of the railway administrations of Austria, Czechoslovakia, Poland, or Belgium. The reorganisation of the vehicle numbers of the young Deutsche Bundesbahn in the early fifties of the last century led to the change of "Gs Oppeln" into "Gms 30". Some of the wagons even came into the EUROP wagon pool, thus serving on an international basis. With the emergence of the first newly built goods wagons at the end of the fifties, a decision was made against an expensive general overhaul of the wagons. When the UIC numbering system was introduced, the existing wagons were re-numbered into "Glms 200", and some of them survived until 1979. Model Metal axle bearing Bogie with three-point support True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails Individually mounted steps Individually mounted axle brake rod Individually mounted brake systems Perforated car body supports
On order, shipped within 10-15 days
Prototype Although its payload was lower than that of the newer cars of Classes Gm and Glm, Bavaria was not able to dispense with the older G-cars. In particular when transporting lighter package freight, e.g. products of the large glass industry in the Bavarian forest, the limited load-bearing capacity did not play a role. Therefore the older cars also had red-brown livery after 1912 and were assigned to the newly created “Regensburg” grouping. All cars with a payload of less than 15 tonnes were included in this group. Model Metal wheels Tip bearing wheelsets Precise replica of board joints Fine replica of the wheel bearing True to original brake unit Individually mounted handrails Individually mounted signal holder
On order, shipped within 10-15 days
Prototype Although its payload was lower than that of the newer cars of Classes Gm and Glm, Bavaria was not able to dispense with the older G-cars. In particular when transporting lighter package freight, e.g. products of the large glass industry in the Bavarian forest, the limited load-bearing capacity did not play a role. Therefore the older cars also had red-brown livery after 1912 and were assigned to the newly created “Regensburg” grouping. All cars with a payload of less than 15 tonnes were included in this group. Model Metal wheels Tip bearing wheelsets Precise replica of board joints Fine replica of the wheel bearing True to original brake unit Individually mounted handrails Individually mounted signal holder
On order, shipped within 10-15 days
Prototype Although its payload was lower than that of the newer cars of Classes Gm and Glm, Bavaria was not able to dispense with the older G-cars. In particular when transporting lighter package freight, e.g. products of the large glass industry in the Bavarian forest, the limited load-bearing capacity did not play a role. Therefore the older cars also had red-brown livery after 1912 and were assigned to the newly created “Regensburg” grouping. All cars with a payload of less than 15 tonnes were included in this group. Model Metal wheels Tip bearing wheelsets Precise replica of board joints Fine replica of the wheel bearing True to original brake unit Individually mounted handrails Individually mounted signal holder
On order, shipped within 10-15 days