Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Control, sound and smoke

Filter products
14% off the recommended price
Track Power Wires
LGB 50160 Scale G
Track Power Wires

This colour-coded cable makes the track connection easy. Simply fasten the screw terminals to the track and connect the cable ends to your transformer. Cross-section: 0.5 mm2. Length: 1.5 m. (Not for use with JUMBO.)

Selling price: CHF 14.45 RRP CHF 16.99

In stock: 2 on the shelf, shipped within 1-3 days

Turnout Decoder, 1 Circuit
LGB 55524 Scale G
Turnout Decoder, 1 Circuit

With this point decoder, the control commands for one LGB solenoid accessory can be transmitted easily via the tracks. Power is drawn directly from the track, which avoids long, complicated wiring. This point decoder is thus ideal for controlling points and signals out on the line or at more distant locations on your LGB layout. Suitable for the CS 2 and CS 3 as well as MZS III. The DCC, mfx and MM formats are supported.

Selling price: CHF 61.20 RRP CHF 66.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Activating Magnet
LGB 17010 Scale G
Activating Magnet

Triggers the LGB 17100 track contact. Simply mount it under LGB locomotives.

Selling price: CHF 7.40 RRP CHF 8.69

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
36 Watt Switched Mode Power P
LGB 51090 Scale G
36 Watt Switched Mode Power P

Weatherproof (IP 67) switched-mode power supply for supplying the 51099 controller with power. Use with 51099.

Selling price: CHF 70.00 RRP CHF 77.99

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Blue/Red 2-Conductor Wire, 20 Meters / 65 feet 7 inches
LGB 51235 Scale G
Blue/Red 2-Conductor Wire, 20 Meters / 65 feet 7 inches

This cable is designed especially for supplying power to your LGB tracks and is colour-coded. Cross-section: 0.5 mm2, length: 20 m.

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 1 on the shelf, shipped within 1-3 days

Retrofit Sound Decoder
LGB 55029 Scale G
Retrofit Sound Decoder

Model This decoder is suitable for use in digital operation (DCC, mfx) as well as in analogue operation (DC). It can be used to convert all LGB motive power units built from 2014 with the 27-pin interface. Many vehicles with the old 10-pin interface can be converted by means of the 55529 interface adapter. Vehicles without an interface can be converted by means of the included interface board; size of the interface board approx. 65 mm x 40 mm. A speaker box is also included, but other speakers with suitable electrical characteristics can also be connected. Compared to the previous decoder, the performance data have been considerably increased; it also offers considerably more functions and programming options. The decoder can be conveniently programmed and adapted to your individual needs with the Märklin decoder tool (https://www.maerklin.de/de/service/downloads/neu-nachruest-decoder-mld3msd3/mdecodertool-mdt3/). The extensive sound library, which has been specially expanded to include a large number of the well-known LGB models and is constantly being added to, can be accessed via the Internet. Technical data: - Total load capacity max. 10 A, motor output > 4 A - Audio power (sound) 6.7 W/4 Ω - Locomotive address programmable from 1-10239 - 14 or 28 (128) speed levels - Load control adjustable to different locomotive types in analogue and digital operation - Parallel control for all light and function outputs - Programmable blinking light and short-duration functions. These and other functions can be programmed with the Märklin CS 2 and CS 3 central units as well as the Märklin Mobile Station. Highlights Now 32 functions Max. 10 A total current Optimised coasting behaviour Volume of the sounds individually adjustable Calibration function for adapting the motors

Selling price: CHF 182.00 RRP CHF 199.00

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Shuttle Train Automatic Circuit Box
LGB 10345 Scale G
Shuttle Train Automatic Circuit Box

With the automatic shuttle unit, you can have a train shuttle back and forth between two stations. An electronic circuit stops the train at the station and then lets it run back again. Easy to install, with an adjustable dwell time and prototypical gentle starting and braking. For connection to 10-24 V DC. The 10345 is the technically optimised and improved successor to the 10340.

Selling price: CHF 135.15 RRP CHF 159.00

On order, shipped within 10-15 days

14% off the recommended price
Track Contact
LGB 17100 Scale G
Track Contact

With this small contact, you can automatically control your LGB points, signals and other accessories. It is triggered by a locomotive equipped with the LGB 17010 magnet and can easily be clipped into most LGB tracks.

Selling price: CHF 18.70 RRP CHF 21.99

On order, shipped within 10-15 days

14% off the recommended price
Orange/White 2-Conductor Wire, 20 Meters / 65 feet 7 inches
LGB 50130 Scale G
Orange/White 2-Conductor Wire, 20 Meters / 65 feet 7 inches

This cable is designed and colour-coded especially for LGB points and signals. Cross-section: 0.5 mm2, length: 20 m.

Selling price: CHF 25.50 RRP CHF 29.99

On order, shipped within 10-15 days

14% off the recommended price
Wire Terminals, 50 Pieces
LGB 50131 Scale G
Wire Terminals, 50 Pieces

Keep your cable ends from "fraying". Using pliers, you can crimp these ferrules onto all LGB cables with a 0.5 mm2 cross-section.

Selling price: CHF 11.05 RRP CHF 12.99

On order, shipped within 10-15 days

14% off the recommended price
Black/White 2-Conductor Wire, 20 Meters / 65 feet 7 inches
LGB 50140 Scale G
Black/White 2-Conductor Wire, 20 Meters / 65 feet 7 inches

This cable is designed and colour-coded especially for LGB accessories such as control panels and lighting. Cross-section: 0.5 mm2, length: 20 m.

Selling price: CHF 25.50 RRP CHF 29.99

On order, shipped within 10-15 days

14% off the recommended price
Track Feeder Wire Terminals, 2 Pieces
LGB 50161 Scale G
Track Feeder Wire Terminals, 2 Pieces

Make your own track connection cable with the cable length you want. Each terminal is equipped with a screw for fastening to the rail and a socket for connecting the cable. Required for connecting the CS2/CS3 digital central unit, Märklin 60215/60216.

Selling price: CHF 11.05 RRP CHF 12.99

On order, shipped within 10-15 days

14% off the recommended price
Distribution Strip
LGB 50720 Scale G
Distribution Strip

With this practical wiring aid you can connect up to 12 wires at a time. This allows you to connect street lamps or cables for several feeder points. Terminals 1-12 and 13-24 are each electrically connected to one another. Screw terminals make the connections easier. 84 x 42 x 19 mm.

Selling price: CHF 28.90 RRP CHF 33.99

On order, shipped within 10-15 days

15% off the recommended price
Electronic Locomotive Controller, 5 Amps
LGB 51079 Scale G
Electronic Locomotive Controller, 5 Amps

This electronic controller for analogue operation offers state-of-the-art technology with high traction current and modern features for your analogue LGB layout: max. 5 A traction current, for use with the 51095 switched-mode power supply. Very sensitive control and smoothed DC voltage. Adjustable control range: +/- 135° with a zero position in the centre / booster button with programmable acceleration, stop/halt button. LED indicators for stop, overload, ready for operation, and direction of travel. Terminals for cables with a cross-section of up to 1.5 mm2, protection against short circuits. Output: 0-24 V DC voltage. Traction current: max. 5 A. Dimensions 160 x 120 x 95 mm.

Selling price: CHF 199.75 RRP CHF 235.00

On order, shipped within 10-15 days

15% off the recommended price New
EU Switched Mode Power Pack 110 VA IP65
LGB 51085 Scale G
EU Switched Mode Power Pack 110 VA IP65

Prototype Splash-proof 110 VA switched mode power pack, IP 65, with a European plug. 120 volts - 240 volts. Suitable for the 51079 locomotive controller and the CS 2/3 60215, 60216, 60226.

Selling price: CHF 126.65 RRP CHF 149.00

On order, shipped within 10-15 days

14% off the recommended price
36 Watt Switched Mode Power Pack
LGB 51092 Scale G
36 Watt Switched Mode Power Pack

Model Switched-mode power supply, protected against water jets (IP 65), for supplying power to the 51099 controller. Connecting cable to the mains with a Euro plug. Highlights 230V, 36 VA. Euro plug, can be used universally Protected against water jets IP 65

Selling price: CHF 68.00 RRP CHF 79.99

On order, shipped within 10-15 days

14% off the recommended price
Locomotive Controller
LGB 51099 Scale G
Locomotive Controller

Controller for use with the 51092 switched-mode power supply.

Selling price: CHF 59.50 RRP CHF 69.99

On order, shipped within 10-15 days

14% off the recommended price
Connection Wires
LGB 51233 Scale G
Connection Wires

This two-conductor black/white cable is designed for the AC connections on your LGB layout and is colour-coded accordingly. Cross-section 1.5 mm2, length 15 m.

Selling price: CHF 25.50 RRP CHF 29.99

On order, shipped within 10-15 days

14% off the recommended price
Control Box
LGB 51805 Scale G
Control Box

With this versatile control panel you can switch up to four electrical circuits on and off, e.g. electrically separated track blocks or street lamps. Each toggle switch operates one circuit. Depending on your needs, you can connect the control panel to DC or AC power by means of the plugs on the sides. An LED indicates when the control panel is being supplied with power. Colour-coded connections on the back make hooking it up easier. With stickers for marking the switch assignments. 126 x 116 x 66 mm. Replaces item 51800.

Selling price: CHF 76.50 RRP CHF 89.99

On order, shipped within 10-15 days

15% off the recommended price
Electronic Locomotive Controller, 5 Amps
LGB 52120 Scale G
Electronic Locomotive Controller, 5 Amps

The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.

Selling price: CHF 165.75 RRP CHF 195.00

On order, shipped within 10-15 days

15% off the recommended price
Electronic Panel Mount Locomotive Controller, 5 Amps
LGB 52121 Scale G
Electronic Panel Mount Locomotive Controller, 5 Amps

This controller is designed for special applications, e.g. for installation in track diagram control panels. With increased running current, while at the same time generating less waste heat than its predecessor. Features: max. 5 A running current / built-in rectifier / suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 100 x 80 x 90 mm.

Selling price: CHF 143.65 RRP CHF 169.00

On order, shipped within 10-15 days

14% off the recommended price
Connecting Cable
LGB 55019 Scale G
Connecting Cable

Connecting cable for connecting the MZS Power Booster to the Märklin CS2 to increase power.

Selling price: CHF 18.70 RRP CHF 21.99

On order, shipped within 10-15 days

15% off the recommended price
MTS Reverse Loop Module
LGB 55085 Scale G
MTS Reverse Loop Module

Reversing loop module for the digital LGB system world. Switch the reversing loop on your digital layout automatically and without short circuits. In doing so, you protect your digital system and of course your rolling stock. An additional advantage of the reversing loop module: several reversing loops can be used on the layout at the same time. Conventional reversing loop modules generate a short circuit when the train enters and, by means of a voltage dip, force the polarity of the track to be reversed, e.g. the 55080. The MZS reversing loop module, by contrast, switches without short circuits; an interruption of the voltage on the track is prevented. Overloading of the MZS central unit by the deliberately generated short circuit is thus a thing of the past. Above all, this protects track components such as locomotive decoders, point decoders and the electronics usually installed in locomotives and wagons. Compatible with the previous components. Notes: Suitable to a limited extent for analogue operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm.

Selling price: CHF 114.75 RRP CHF 135.00

On order, shipped within 10-15 days

14% off the recommended price
Adapter Circuit Board for Decoder Programmer
LGB 55129 Scale G
Adapter Circuit Board for Decoder Programmer

Model Adapter board for plugging the new 55029 large-scale decoder into the Märklin 60971 decoder programmer. Easy connection to a PC/laptop. In addition, the Märklin Decoder Tool software is required, which can be conveniently downloaded from the Märklin homepage (www.maerklin.de under Service/Downloads/Nachrüstdecoder/mLD3/mSD3). It can be used to easily transfer existing or self-recorded sounds; other settings such as maximum speed, braking behaviour, etc. can also be programmed very easily and quickly with it. Note The Märklin 60971 decoder programmer is also required. It is not included.

Selling price: CHF 33.15 RRP CHF 38.99

On order, shipped within 10-15 days