Control, sound and smoke
This colour-coded cable makes the track connection easy. Simply fasten the screw terminals to the track and connect the cable ends to your transformer. Cross-section: 0.5 mm2. Length: 1.5 m. (Not for use with JUMBO.)
In stock: 2 on the shelf, shipped within 1-3 days
With this point decoder, the control commands for one LGB solenoid accessory can be transmitted easily via the tracks. Power is drawn directly from the track, which avoids long, complicated wiring. This point decoder is thus ideal for controlling points and signals out on the line or at more distant locations on your LGB layout. Suitable for the CS 2 and CS 3 as well as MZS III. The DCC, mfx and MM formats are supported.
In stock: 2 on the shelf, shipped within 1-3 days
Triggers the LGB 17100 track contact. Simply mount it under LGB locomotives.
In stock: 1 on the shelf, shipped within 1-3 days
Weatherproof (IP 67) switched-mode power supply for supplying the 51099 controller with power. Use with 51099.
In stock: 1 on the shelf, shipped within 1-3 days
This cable is designed especially for supplying power to your LGB tracks and is colour-coded. Cross-section: 0.5 mm2, length: 20 m.
In stock: 1 on the shelf, shipped within 1-3 days
Model This decoder is suitable for use in digital operation (DCC, mfx) as well as in analogue operation (DC). It can be used to convert all LGB motive power units built from 2014 with the 27-pin interface. Many vehicles with the old 10-pin interface can be converted by means of the 55529 interface adapter. Vehicles without an interface can be converted by means of the included interface board; size of the interface board approx. 65 mm x 40 mm. A speaker box is also included, but other speakers with suitable electrical characteristics can also be connected. Compared to the previous decoder, the performance data have been considerably increased; it also offers considerably more functions and programming options. The decoder can be conveniently programmed and adapted to your individual needs with the Märklin decoder tool (https://www.maerklin.de/de/service/downloads/neu-nachruest-decoder-mld3msd3/mdecodertool-mdt3/). The extensive sound library, which has been specially expanded to include a large number of the well-known LGB models and is constantly being added to, can be accessed via the Internet. Technical data: - Total load capacity max. 10 A, motor output > 4 A - Audio power (sound) 6.7 W/4 Ω - Locomotive address programmable from 1-10239 - 14 or 28 (128) speed levels - Load control adjustable to different locomotive types in analogue and digital operation - Parallel control for all light and function outputs - Programmable blinking light and short-duration functions. These and other functions can be programmed with the Märklin CS 2 and CS 3 central units as well as the Märklin Mobile Station. Highlights Now 32 functions Max. 10 A total current Optimised coasting behaviour Volume of the sounds individually adjustable Calibration function for adapting the motors
In stock: 1 on the shelf, shipped within 1-3 days
With the automatic shuttle unit, you can have a train shuttle back and forth between two stations. An electronic circuit stops the train at the station and then lets it run back again. Easy to install, with an adjustable dwell time and prototypical gentle starting and braking. For connection to 10-24 V DC. The 10345 is the technically optimised and improved successor to the 10340.
On order, shipped within 10-15 days
With this small contact, you can automatically control your LGB points, signals and other accessories. It is triggered by a locomotive equipped with the LGB 17010 magnet and can easily be clipped into most LGB tracks.
On order, shipped within 10-15 days
This cable is designed and colour-coded especially for LGB points and signals. Cross-section: 0.5 mm2, length: 20 m.
On order, shipped within 10-15 days
Keep your cable ends from "fraying". Using pliers, you can crimp these ferrules onto all LGB cables with a 0.5 mm2 cross-section.
On order, shipped within 10-15 days
This cable is designed and colour-coded especially for LGB accessories such as control panels and lighting. Cross-section: 0.5 mm2, length: 20 m.
On order, shipped within 10-15 days
Make your own track connection cable with the cable length you want. Each terminal is equipped with a screw for fastening to the rail and a socket for connecting the cable. Required for connecting the CS2/CS3 digital central unit, Märklin 60215/60216.
On order, shipped within 10-15 days
With this practical wiring aid you can connect up to 12 wires at a time. This allows you to connect street lamps or cables for several feeder points. Terminals 1-12 and 13-24 are each electrically connected to one another. Screw terminals make the connections easier. 84 x 42 x 19 mm.
On order, shipped within 10-15 days
This electronic controller for analogue operation offers state-of-the-art technology with high traction current and modern features for your analogue LGB layout: max. 5 A traction current, for use with the 51095 switched-mode power supply. Very sensitive control and smoothed DC voltage. Adjustable control range: +/- 135° with a zero position in the centre / booster button with programmable acceleration, stop/halt button. LED indicators for stop, overload, ready for operation, and direction of travel. Terminals for cables with a cross-section of up to 1.5 mm2, protection against short circuits. Output: 0-24 V DC voltage. Traction current: max. 5 A. Dimensions 160 x 120 x 95 mm.
On order, shipped within 10-15 days
Prototype Splash-proof 110 VA switched mode power pack, IP 65, with a European plug. 120 volts - 240 volts. Suitable for the 51079 locomotive controller and the CS 2/3 60215, 60216, 60226.
On order, shipped within 10-15 days
Model Switched-mode power supply, protected against water jets (IP 65), for supplying power to the 51099 controller. Connecting cable to the mains with a Euro plug. Highlights 230V, 36 VA. Euro plug, can be used universally Protected against water jets IP 65
On order, shipped within 10-15 days
Controller for use with the 51092 switched-mode power supply.
On order, shipped within 10-15 days
This two-conductor black/white cable is designed for the AC connections on your LGB layout and is colour-coded accordingly. Cross-section 1.5 mm2, length 15 m.
On order, shipped within 10-15 days
With this versatile control panel you can switch up to four electrical circuits on and off, e.g. electrically separated track blocks or street lamps. Each toggle switch operates one circuit. Depending on your needs, you can connect the control panel to DC or AC power by means of the plugs on the sides. An LED indicates when the control panel is being supplied with power. Colour-coded connections on the back make hooking it up easier. With stickers for marking the switch assignments. 126 x 116 x 66 mm. Replaces item 51800.
On order, shipped within 10-15 days
The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.
On order, shipped within 10-15 days
This controller is designed for special applications, e.g. for installation in track diagram control panels. With increased running current, while at the same time generating less waste heat than its predecessor. Features: max. 5 A running current / built-in rectifier / suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 100 x 80 x 90 mm.
On order, shipped within 10-15 days
Connecting cable for connecting the MZS Power Booster to the Märklin CS2 to increase power.
On order, shipped within 10-15 days
Reversing loop module for the digital LGB system world. Switch the reversing loop on your digital layout automatically and without short circuits. In doing so, you protect your digital system and of course your rolling stock. An additional advantage of the reversing loop module: several reversing loops can be used on the layout at the same time. Conventional reversing loop modules generate a short circuit when the train enters and, by means of a voltage dip, force the polarity of the track to be reversed, e.g. the 55080. The MZS reversing loop module, by contrast, switches without short circuits; an interruption of the voltage on the track is prevented. Overloading of the MZS central unit by the deliberately generated short circuit is thus a thing of the past. Above all, this protects track components such as locomotive decoders, point decoders and the electronics usually installed in locomotives and wagons. Compatible with the previous components. Notes: Suitable to a limited extent for analogue operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm.
On order, shipped within 10-15 days
Model Adapter board for plugging the new 55029 large-scale decoder into the Märklin 60971 decoder programmer. Easy connection to a PC/laptop. In addition, the Märklin Decoder Tool software is required, which can be conveniently downloaded from the Märklin homepage (www.maerklin.de under Service/Downloads/Nachrüstdecoder/mLD3/mSD3). It can be used to easily transfer existing or self-recorded sounds; other settings such as maximum speed, braking behaviour, etc. can also be programmed very easily and quickly with it. Note The Märklin 60971 decoder programmer is also required. It is not included.
On order, shipped within 10-15 days