Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
Prototype 2-axle "Donnerbüchse" baggage car, standard design type Pwi. Privately owned car as a museum railroad car. With a "Special Run" destination board. Historically approximated condition of Era III. Model Car body and floor made of plastic, finely detailed and printed, with prototypical lettering. Disk wheels with black nickel finish. Length over the buffers 63 mm. One-time series One-time series only for Märklin Insider Club members.
Club members only (Märklin Insider)
Prototype Privately owned 4-axle bottle wagon. Intended for transporting carbide. Model Exclusive wagon for Insider members with 25 years of membership. The carbide bottle is printed with the Insider logo and the lettering of a privately owned wagon. Length over the buffers 56 mm. One-time series The 82091 carbide bottle wagon is being produced exclusively for the Insider members with 25 years of membership. Note Exclusive Insider wagon for the members with 25 years of club membership.
Club members only (Märklin Insider)
Prototype Two-axle tank wagon with a brake platform. Model Exclusive tank wagon. Black disc wheels. Wagon length over the buffers 40 mm. One-time series The 82319 tank wagon is being produced exclusively for Insider members with 5 years of membership.
Club members only (Märklin Insider)
Model Loyalty wagon for 10 years of Insider membership. This birthday wagon is not only particularly suited to treating yourself, but is certainly also ideal as a gift for friends and acquaintances. A "Happy Birthday" music module is built into the originally designed packaging. The melody sounds when the packaging is opened. One-time series The 86002 birthday wagon is produced exclusively for Insider members with 10 years of membership. Note Special wagon for anniversary members, Z gauge. This Insider special wagon can be ordered exclusively by Insider members who have remained loyal to our club continuously for at least 10 years. It can also be ordered by all members who have already purchased the previous birthday wagon (old design).
Club members only (Märklin Insider)
Prototype 3 Tams 886 wagons from the German Federal Railway (DB), in an Era IV condition. Model 3 Tams 886 sliding roof wagons from the German Federal Railway (DB), made of plastic, disc wheels black nickel-plated. Total length over the buffers approximately 174 mm.
Prototype 4 Eanos 415 W high-sided open wagons and one Res 424 Z stake wagon from the Polish logistics group PKP Cargo for transporting pit props and long timber. In an Era VI condition. Model 4 x Eanos type wagons, 3 x of them loaded with pit props. The models are lettered prototypically and are equipped with applied brake change-over levers without a protective bracket, compressed air tanks, and hand wheels. 1 x Res stake wagon with long timber as a load. All of the wagons have close coupler hooks. Length over the buffers approximately 426 mm. Highlights All of the wagons are lettered individually and some are equipped with load inserts The Eanos for the first time with brake change-over levers without a protective bracket
Prototype Ci dT Wü 05 of the Deutsche Reichsbahn (DRG). Kittel design from the Maschinenfabrik Esslingen. Operating condition Era II. Model Steam railcar with a bell-armature motor, finely detailed, chassis of metal. Many separately applied parts. Enlarged buffer plates. Equipped with a system coupler at the rear. At the front with a prototypical reproduction of the buffer beam. 2-light headlights with warm white LEDs that change over with the direction of travel. Both axles powered. Length over the buffers approx. 51 mm. Highlights Chassis of the model of metal Bell-armature motor Highly detailed Headlights with warm white LEDs (LED). The model has a system coupler at the rear Correct reproduction of the buffer beam at the front Many separately applied parts
Prototype ETA 150 rechargeable battery powered rail car and ESA 150 cab control car of the German Federal Railroad (DB) in the crimson paint scheme of Era III. The train looks as it did around 1965. Model Completely new development, metal chassis, plastic bodies. Both trucks on the powered rail car driven by a bell-shaped armature motor. LED headlights changing over with the direction of travel, 3 warm white/2 red. Rear headlights on the powered car can be turned off. Replica cabs with LED interior lighting. Suggested interior details with passenger area lighting. Very high level of detail with a fine, elaborate paint scheme and lettering. Good tractive effort thanks to the high weight of the unit. Length over the buffers approx. 217 mm. Note 88250 is being produced in a one-time series exclusively for Insider Club members.
Club members only (Märklin Insider)
Prototype V 320 001 diesel locomotive of the German Federal Railroad (DB) in the crimson paint scheme of Era IIIb. The locomotive looks as it did around 1965. Model Completely new development, metal chassis, plastic body. Both trucks powered. Bell-shaped armature motor. LED headlights changing over with the direction of travel, 3 warm white/2 red. Engine room lighting and replica. Cab lighting. High level of detail with a fine, elaborate paint scheme and lettering. Good tractive effort thanks to the high weight of the locomotive. Applied grab irons. Length over the buffers approx. 105 mm. Note The 88320 diesel locomotive is being produced in a one-time series exclusively for Insider Club members.
Club members only (Märklin Insider)
Prototype Class V 90 multi-purpose diesel locomotive of Deutsche Bahn (DB) in the purple red basic paint scheme of Era III. The locomotive looks as it did around 1967. Model Completely new tooling, in the version of Era III with round metal buffers. Chassis of metal/plastic, body of plastic. Buffer plates of metal. All axles powered, bell-armature motor, triple headlights with warm white/red LEDs that change over with the direction of travel. Dark nickel-plated wheel rims. Reproduction of the cab interior. Length over the buffers approx. 65 mm. Highlights Completely new tooling Bell-armature motor LED headlights
Prototype 44 1315 heavy freight locomotive of the German Federal Railroad (DB) with a 2'2'T34 oil tender. The locomotive looks as it did in Era III, or in Era VI as the locomotive of the Märklineum in Göppingen. Model Model with a bell-shaped armature motor and all coupled axles powered. Dark wheel rims and rod parts. Finely detailed, fully working rods/valve gear. Replica brakes, sand pipes, etc. Indusi on both sides. Enlarged buffer plates. Prototypical paint scheme and lettering. Length over the buffers approx. 112 mm. Architectural cardboard kit for building the original locomotive shed in which locomotive 44 1315 is housed is included. This allows the locomotive's current condition to be recreated prototypically.
Club members only (Märklin Insider)
