Track, catenary and signals H0
Model Bracket arm made of steel wire with a holder for the support wire and the steady wire. To be installed on line masts and tower masts. Pack of 5 pieces. Note Metal bracket arms for good electrical contact.
Content: 5 pc. (CHF 3.18 / 1 pc.)
In stock, shipped within 1-3 days
Prototype The Märklin curved point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin left curved point with an inner curve R1 of 360 mm / 30°. Outer curve: 30° at a parallel circuit spacing of 77.5 mm. With a manual control lever. The 74491 electric point motor, the 74462 digital decoder and the 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin slim right point with a length of 236.1 mm. Branch track radius 1114.6 mm. Point curve 12.1°. Common crossing 10° made of metal. Two 24071 tracks are required at the end of the point; a matching ballast base piece is included. With a manual control lever. The 74491 electric point motor, the 74470/74471 point lanterns and the 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Radius of curvature 424.6 mm. Only for plastic track (standard circle II). 3 clips for fastening the track. Length and radius as for the 2231 track.
In stock, shipped within 1-3 days
Prototype The Märklin track end with a buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin track end with a buffer stop with a length of 77.5 mm + 5 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days
Retrofit set for C track points. Twin-coil motor with end shut-off. Operation possible by means of the 72752 point control panel with feedback or the point built-in decoder 1. On points the electric motor can be installed and connected afterwards quite easily without special tools. The motor sits concealed in the ballast bed. Below-baseboard mounting is not required. It is encapsulated to protect it from dirt and is protected against overloading by end shut-off. Control is by means of the 72752 point control panel. The manual operating lever can remain functional.
In stock, shipped within 1-3 days
94.2 mm. Contents: 1 piece. A section of track suitable for manual and electrical uncoupling. Electrical operation is only possible in conjunction with the 72752 control panel and the supplied cable.
In stock, shipped within 1-3 days
Prototype The Märklin C track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, using special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin curved circuit track (C track) with a radius R1 of 360 mm / 15°. The click connection with the "Click". Set up and taken down in no time. Stable and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliable centre conductor operation and the common return on the two rails are always retained, allowing great track routes without complicated wiring (e.g. for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track therefore looks as if it were made from a single length, just like the prototype. Special fishplates are not needed. Invisible strength: Thanks to this stable click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can therefore be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of space for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setting up and taking down thanks to the stable click connection, even on the carpet All Märklin H0 models work on the C track A transition from Märklin M track to C track can be made with item 24951 A transition from Märklin K track to C track can be made with item 24922
In stock, shipped within 1-3 days
Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin slim left point with a length of 236.1 mm. Branch track radius 1114.6 mm. Point curve 12.1°. Common crossing 10° made of metal. Two 24071 tracks are required at the end of the point; a matching ballast base piece is included. With a manual control lever. The 74491 electric point motor, the 74470/74471 point lanterns and the 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype The Märklin circuit track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin straight circuit track with a length of 94.2 mm. Momentary contact by means of the pickup shoe on vehicles. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model With an electromagnetic mechanism. Length 1/2 = 90 mm. 2 connection cables. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung track planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Reliable electrical operation thanks to the proven centre conductor For anyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Red and brown connecting cable with flat plugs for C tracks at both ends. Length 2 m.
In stock, shipped within 1-3 days
Model Lattice mast and bracket arm made of metal. Base with a click connection. Additional mast holder to match the Märklin bridge system. Height 100 mm. Pack of 5 pieces. Note The masts of the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is fitted into the matching base for C track or K track by means of a click connection.
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Model For retrofitting 2 C track points. Suitable for right-hand and left-hand points or a three-way point. Can be used with a manual switch lever and/or with the 74491 electric point motor. Lighting with maintenance-free LEDs. Note Point lanterns with LED lighting. All C track points, with a manual switch lever or an electric point motor, controlled conventionally or digitally, can be fitted with illuminated point lanterns. The installation is simple, and the lighting insert also fits the fixed lantern of the double slip point. Maintenance-free miniature LEDs make the true-to-scale size of the lanterns possible. Note: A fixed lantern with prototypical lighting is already installed in the 24624 double slip point.
In stock, shipped within 1-3 days
1 right-hand and 1 left-hand point lantern each, for mounting on points with a plug-in point motor. Can be used with a manual lever, the 75491 point motor or the 7548 below-baseboard motor. Lighting with maintenance-free LEDs.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable manual control lever. Fixed common crossing and check rails. Length of the straight track 225 mm. Point curve 14° 26'. Radius of the curve 902.4 mm. The 75491 electromagnetic point motor can be plugged in. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Prototype The Märklin three-way point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin three-way point with a length of 188.3 mm. 2 x 24.3°. Connection dimensions on both ends the same as for the 24611/24612 points. Asymmetrical common crossing area with offset pairs of point blades. Two manual control levers. Two 74491 electric point motors and the 74470/74471 point lanterns can be retrofitted. Digital operation is possible with the 60831 or 74465 decoder. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
For holding plastic or metal track. 3 clips for fastening the K tracks. Length 180 mm.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable electromagnetic drive (75491). Inner curve 30°. Outer curve 30° at a parallel circuit spacing of 64.6 mm. The length and curvature of the inner curve correspond to 2221. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin double slip combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin double slip with a length of 188.3 mm / 24.3°. With a built-in 74491 electric point motor and an illuminated point lantern. The 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Length 236.1 mm. Crossing angle 12.1°. With a built-in 74491 electric point motor. With a manual control lever. Four 24071 tracks are required at the ends of the double slip (not included with the 24720). Two matching ballast base wedges are included. The 74477 point lantern and the 74467 digital decoder can be retrofitted. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin uncoupler track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin uncoupler track with a length of 94.2 mm. Electric. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock: 5 on the shelf, shipped within 1-3 days
With an illuminated ground signal. Maintenance-free LED. Length 38 mm. For snapping onto the rails. A raised countersunk head wood screw is included.
In stock: 5 on the shelf, shipped within 1-3 days
Length 38 mm. For snapping onto the rails. A raised countersunk head wood screw is included.
In stock: 5 on the shelf, shipped within 1-3 days