Model trains in H0, N, TT and G
Piko, Swiss and European trains in H0 and N
Re 4/4 I, Ae 4/7, RABDe 12/12 "Mirage", Giruno, EW I coaches of the SBB and BLS: Piko reproduces Swiss railways in H0 and N, often for both DC and AC, and also covers TT and large-scale G for the garden.
- 3647items in the shop
- G, H0, TT and Nfour scales
- Since 1949founded in Chemnitz

What Piko brings to your layout
- Swiss railways: Re 4/4 I, Ae 4/7, Ae 6/6, Re 6/6, RBe 4/4, RABDe 12/12 "Mirage", Giruno, SBB Cargo and BLS Vectron, EW I and EW II coaches of the SBB and BLS.
- DC or AC: many H0 models come in both a DC and an AC version, with or without sound.
- Everything for H0 and G: locomotives, coaches and wagons, buildings, track, starter sets and an in-house digital system. In TT and N, locomotives and rolling stock.
- A company from Sonneberg: founded in 1949 in Chemnitz, Piko is based in Sonneberg, Thuringia, and has been owned by René F. Wilfer since 1992.
The Piko families
Swiss railways
129 itemsSwitzerland H0Locomotives, multiple units, coaches and wagons of the SBB, BLS and Swiss companies.See the items
27 itemsSwitzerland NRBe 4/4, EW I coaches of the SBB and BLS, SBB Cargo and BLS Cargo locomotives.See the itemsFor your H0 layout (1:87)
1219 itemsLocomotives H0Electric, diesel and steam, for DC or AC, with or without sound.See the items
391 itemsPassenger coaches H0EW I and EW II, Eurofima, Corail, regional and express coaches.See the items
349 itemsFreight wagons H0Covered wagons, tank wagons, container wagons, open wagons and pocket wagons.See the itemsIn N, TT and G
All Piko items
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic for the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbacher works, were used in shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved to be prone to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation when running, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Suitable PSD XP sound decoder: #56649 | Base plate with track replica and suitable retrofitting parts, such as brake hoses, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic in service with the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbach works, were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved susceptible to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the roof superstructure with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-typical sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic for the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with central cab built by the Jenbach works were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved susceptible to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-typical sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified route between Berlin, Halle (Saale) and Munich, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep gradients of the Frankenwald, it was still able to reach 60 km/h. The active service life of the E 19 ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, the E 19 01 is preserved as an impressive testament to the history of German electric locomotives. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine handrails, UIC sockets and an extra centrifugal governor | Extra sandboxes, axle bearing covers and battery boxes | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 2-rail, direct current
On order, shipped within 4-5 days
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified route between Berlin, Halle (Saale) and Munich, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep gradients of the Frankenwald, it was still able to reach 60 km/h. The active service life of the E 19 ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, E 19 01 is preserved as an impressive testament to German electric locomotive history. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine handrails, UIC sockets and an extra centrifugal governor | Extra sandboxes, axle bearing covers and battery boxes | Factory-fitted with a PSD XP digital decoder with sound and a wide range of functions | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified Berlin – Halle (Saale) – Munich route, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep ramps of the Frankenwald, it was expected to reach 60 km/h. The active service life ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, E 19 01 is preserved as an impressive testament to German electric locomotive history. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine hand details, UIC sockets and extra centrifugal controller | Extra sandboxes, axle bearing covers and battery boxes | Factory-fitted with PSD XP decoder with sound and a variety of functions | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD. A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railway (CSD) in three series between 1973 and 1983, initially classified as Class S 458.0. In 1988, they were reclassified as Class 210. Developed for shunting and light line duties, these locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983, initially classified as Class S 458.0. In 1988, they were reclassified as Class 210. Designed for shunting and light line duties, the locomotives also proved themselves in passenger service on the lines of West and South Bohemia.
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983, classified as Class S 458.0. In 1988, they were reclassified as Class 210. Designed for shunting and light line duties, the locomotives also proved themselves in passenger services on the lines of West and South Bohemia.
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD. Between 1973 and 1983, a total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series as the Class S 458.0. In 1988, they were reclassified as the Class 210. Developed for shunting and light line duties, the locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD As Class S 458.0, a total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983. In 1988, they were reclassified as Class 210. Developed for shunting and light line duties, the locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983, initially classified as Class S 458.0. In 1988, they were reclassified as Class 210. Designed for shunting and light line duties, these locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2023: Livery variant of the Vectron in the "Güter gehören auf die Schiene" design of DB Cargo in Era VI. The model features a PluX22 digital interface and is prepared for sound retrofitting with the largest possible speaker.
- 2-rail, direct current
On order, shipped within 4-5 days
New for 2023: Livery variant of the Vectron in the "Freight belongs on the rails" design of DB Cargo in Era VI. The model features a PSD XP sound decoder.
- 2-rail, direct current
- Sound
On order, shipped within 4-5 days
New for 2023: livery variant of the Vectron in the "Güter gehören auf die Schiene" design of DB Cargo in Era VI. The model is equipped with a PSD XP sound decoder.
- 3-rail, alternating current
- Sound
On order, shipped within 4-5 days
New for 2023: printed version of the Vectron with the ČD QR code in Era VI. The model features a PluX22 digital interface and is prepared for sound retrofitting with the largest possible speaker.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2023: printed version of the Vectron with ČD QR code in Era VI. The model is equipped with a PSD XP sound decoder.
- 2-rail, direct current
- Sound
On order, shipped within 4-5 days
New for 2023: a livery variant of the Vectron in Metrans livery, Era VI. The model features a PluX22 digital interface and is prepared for sound retrofitting with the largest possible speaker.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2023: Livery variant of the Vectron in Metrans livery, Era VI. The model is equipped with a PSD XP sound decoder.
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2023: a livery variant of the Vectron in the "New Alpinisti" livery of BLS, in Era VI. The model features a PluX22 digital interface and is prepared for sound retrofitting with the largest possible speaker.
- 2-rail, direct current
On order, shipped within 4-5 days
New for 2023: Livery variant of the Vectron in the "New Alpinisti" design of the BLS in Era VI. The model is equipped with a PSD XP sound decoder.
- 2-rail, direct current
- Sound
On order, shipped within 4-5 days
New for 2023: Livery variant of the Vectron in the "New Alpinisti" livery of BLS in Era VI. The model features a PSD XP sound decoder.
- 3-rail, alternating current
- Sound
On order, shipped within 4-5 days
New for 2023: a printed version of the Vetron in the "Thuner See" livery of SBB Cargo, Era VI. The model features a PluX22 digital interface and is prepared for sound retrofitting with the largest possible speaker.
- 2-rail, direct current
On order, shipped within 4-5 days
New for 2023: Livery variant of the Vetron in the "Thuner See" design of SBB Cargo in Era VI. The model features a PSD XP sound decoder.
- 2-rail, direct current
- Sound
On order, shipped within 4-5 days

