Locomotives
Steam locomotive 52.5995 of the Austrian Federal Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Variant with a well tank tender and round stack With fine metal-spoked wheels Drive and coupling rods made of precision-cast metal Z21 driver’s cab available Over 1,100 Class 52 locomotives were built at the locomotive factory in Vienna-Floridsdorf. After the war, 113 locomotives remained in Austria. Many were upgraded; for example, some well tank tenders were fitted with cabs, providing a driver’s compartment. The last units were withdrawn from service in 1976 and thus belonged to the final steam locomotives in operation on the standard-gauge network of the Austrian Federal Railways (ÖBB).
Pre-order, release expected in Q2 2027
Steam locomotive 64 415 of the Veluwsche Stoomtrein Maatschappij (VSM). Version with welded water tanks Exposed pipes on the boiler Fine metal wheel sets Leading and trailing wheel sets with spoked wheels Some signage is also included as etched parts Parts on the cab and coal box are color-contrasted, just like on the large original The steam locomotive 64 415 belongs to the legendary German Class 64 series, which was specifically designed for branch lines. The tank locomotive was built in 1936 by the Arnold Jung Lokomotivfabrik in Kirchen (Sieg). With its 1’C1’ wheel arrangement and a top speed of 90 km/h, it was ideally suited to both passenger and light freight trains. After being taken out of service in 1974, the locomotive was initially preserved and, in 1976, acquired by the Dutch heritage railway Veluwsche Stoomtrein Maatschappij. Following a general overhaul, it was restored to operational condition in 1979 and has since been one of the key vehicles in the Beekbergen collection.
Pre-order, release expected in Q4 2027
Steam locomotive 24 040 of the Deutsche Reichsbahn-Gesellschaft. With Wagner smoke deflectors Smoke box door with central lock Some signage is also included as etched parts With authentic sound functions Class 24 was designated in the standard locomotive type catalogue as a passenger train tender locomotive of the 1’ C h2 type with a 15 t axle load for service on branch lines. It was intended to be largely identical in construction to its ‘tender locomotive version’, Class 64. The two-cylinder superheated steam engine delivered 920 PSi. The locomotives, with a driving wheel diameter of 1,500 mm, were approved for a maximum speed of 90 km/h, allowing flexible deployment in passenger train service, including on main lines.
Pre-order, release expected in Q4 2027
Steam locomotive 85 006 of the Deutsche Bundesbahn. Edition model! Model based on the early Era III design True to the prototype with two headlights With cross-compound air pump Fine metal wheel sets Leading and trailing wheels with nine spoked wheels Some signage is also included as etched parts In digital mode with a switchable red tail light on the tender side In total, only 10 of these tender locomotives, each weighing around 133 tonnes, were built for operation on the so-called Höllentalbahn. The Class 85 locomotives were therefore the heaviest tender locomotives ever used in Germany. Thanks to their tractive effort, these stocky-looking tender locomotives quickly proved their worth on the mountain line.
Pre-order, release expected in Q2 2027
Steam locomotive 58 3005 of the Deutsche Reichsbahn. New design! Edition model! Boiler with bevelled air deflectors Delicately crafted spoked wheels Replica of the third inner cylinder with internal gear mechanism Coal tender, type 2‘2‘T26 Based at Rbd Dresden; at Bw Glauchau Some signage is also included as etched parts Switchable driver’s cab and valve gear lighting, as well as a flickering firebox in digital mode With dynamic steam for authentic steam emission from the chimney The steam locomotive 58 3005 belonged to Class 58.30 of the Deutsche Reichsbahn and was thus one of the most distinctive rebuilt locomotives of the GDR. The class was based on the tried-and-tested five-axle coupled freight locomotives of the G 12 type. Between 1958 and 1962, the Deutsche Reichsbahn had a total of 56 locomotives extensively modernised at the Zwickau repair works. Among other things, they were fitted with a more powerful reconstruction boiler and given a significantly altered appearance. 58 3005 was initially based at Dresden-Friedrichstadt, among other places, before being transferred to the Glauchau depot in 1970. A distinctive feature of the locomotive was its 2’2’T26 tender, which it retained until the end of its service life.
Pre-order, release expected in Q4 2027
Steam locomotive Class 477 of the Czechoslovak State Railways. Edition model! Tooling variant! First time in blue livery and as a tooling variant with the large, distinctive water tanks Second-series version Particularly delicate pipework under the boiler Delicately executed spoked wheels Parts of the model made of metal Richly detailed cab Nameplates partly supplied additionally as etched parts In digital operation with switchable cab and motion lighting Version with sound, without dynamic steam The CSD Class 477.0 is the last and technically most advanced steam locomotive class of the Czechoslovak State Railways (CSD). Between 1951 and 1955, a total of 60 units were built by CKD (CKD Sokolovo in Prague); the class developed from the preceding Class 476.1. The locomotives were designed as powerful express tank locomotives with a 2'D2' wheel arrangement for heavy passenger service and, with a service weight of around 131 tonnes, were regarded as one of the heaviest tank locomotives in Europe of their time. The three-cylinder locomotives reached a maximum speed of around 100 km/h and had a starting tractive effort of almost 110 kN. Visually, the Class 477.0 stood out for its distinctive lines, with a streamlined smoke box, Witte smoke deflectors and an elegant, mostly colourful paint scheme with decorative lining. In everyday service this earned it the nickname "Papousek" (parrot).
Pre-order, release expected in Q4 2027
Steam locomotive 58 3005 of the Deutsche Reichsbahn. New design! Edition model! Boiler with bevelled air deflectors Delicately crafted spoked wheels Replica of the third inner cylinder with internal gear mechanism Coal tender, type 2‘2‘T26 Based at Rbd Dresden; at Bw Glauchau Some signage is also included as etched parts Switchable driver’s cab and valve gear lighting, as well as a flickering firebox in digital mode With authentic sound functions The steam locomotive 58 3005 belonged to Class 58.30 of the Deutsche Reichsbahn and was thus one of the most distinctive rebuilt locomotives of the GDR. The class was based on the tried-and-tested five-axle coupled freight locomotives of the G 12 type. Between 1958 and 1962, the Deutsche Reichsbahn had a total of 56 locomotives extensively modernised at the Zwickau repair works. Among other things, they were fitted with a more powerful reconstruction boiler and given a significantly altered appearance. 58 3005 was initially based at Dresden-Friedrichstadt, among other places, before being transferred to the Glauchau depot in 1970. A distinctive feature of the locomotive was its 2’2’T26 tender, which it retained until the end of its service life.
Pre-order, release expected in Q4 2027
Steam locomotive 038 509 of the German Federal Railway. Edition model! Completely new design Finely detailed model with many separately applied plug-in parts Wheels with fine spokes Design with riveted tender and “Witte” smoke deflectors Two tail lights on tender only Driver's cab and valve gear lighting installed; in digital mode switchable For a long time, the class 038 steam locomotives with their riveted tenders and "Witte" smoke deflectors were standard on German branch lines. They usually hauled passenger trains and were therefore not replaceable in the local service for a long time. It was not until the increasing modernization at the Deutsche Bundesbahn that they were replaced by diesel and electric locomotives.
On order, shipped within 10-15 days
Steam locomotive 38 2471 of the railway company of the German Democratic Republic (Deutsche Reichsbahn). Edition model! Completely new design Finely detailed model with many separately applied plug-in parts Wheels with fine spokes Design with riveted tender and “Wagner” smoke deflectors Two tail lights on tender only Driver's cab and valve gear lighting installed; in digital mode switchable The class 38 steam locomotives were stationed in many depots of the Deutsche Reichsbahn. They were mainly used in the passenger service and hauled Reko-wagons and other types of coaches. Many locomotives had a classic appearance and featured riveted tenders and "Wagner smoke deflectors".
On order, shipped within 10-15 days
Steam locomotive 38 3553 of the Deutsche Bundesbahn. Edition model! Finely detailed model with many separately applied plug-in parts 3-dome boiler with feedwater dome, sandbox and steam dome Wheels with fine spokes Version with riveted tender and Witte smoke deflectors Based at the depots BD Wuppertal and Bw Bestwig Two taillights only on the tender Driver's cab and valve gear lighting installed; can be switched in digital operation The class 38 steam locomotives with their riveted tenders and Witte smoke deflectors were a familiar sight on German branch lines for a long time. They mostly hauled passenger trains and were irreplaceable in local transport for a long time. It was only in the increasing modernisation of the Deutsche Bundesbahn that diesel and electric locomotives replaced them.
On order, shipped within 10-15 days
Steam locomotive 38 3553 of the Deutsche Bundesbahn. Edition model! Finely detailed model with many separately applied plug-in parts 3-dome boiler with feedwater dome, sandbox and steam dome Wheels with fine spokes Version with riveted tender and Witte smoke deflectors Based at the depots BD Wuppertal and Bw Bestwig Two taillights only on the tender With driver's cab and valve gear lighting in digital mode With authentic dynamic steam from the chimney The class 38 steam locomotives with their riveted tenders and Witte smoke deflectors were a familiar sight on German branch lines for a long time. They mostly hauled passenger trains and were irreplaceable in local transport for a long time. It was only in the increasing modernisation of the Deutsche Bundesbahn that diesel and electric locomotives replaced them.
On order, shipped within 10-15 days
Steam locomotive 38 3713 of the Deutsche Reichsbahn-Gesellschaft. Edition model! Mold variant! Boiler without smoke deflectors Authentic smokebox door Reichsbahn-style gas lighting lanterns Wheels with delicate spokes Driver's cab and engine lighting installed; switchable in digital operation The Prussian State Railways developed the P8 passenger train locomotive in response to the growing demand for passenger and express train services. By 1923, German manufacturers had already built more than 3,700 of these versatile, triple-coupled locomotives. Later designated Class 38.10–40, the steam locomotive had an output of 880 kW, weighed approximately 130 tonnes with tender and full supplies, and could reach speeds of 100 km/h forwards and 50 km/h in reverse. Repainting the extensive DRG steam locomotive fleet in the new standard black-and-red livery naturally took some time. Consequently, many locomotives remained in the olive green/reddish brown/black colour scheme until around 1930, despite it having been discontinued in 1926. However, they had already been fitted with the new identification plates.
On order, shipped within 10-15 days
Steam locomotive 38 3713 of the Deutsche Reichsbahn-Gesellschaft. Edition model! Mold variant! First version without dynamic steam Boiler without smoke deflectors Authentic smokebox door Reichsbahn-style gas lighting lanterns Wheels with delicate spokes In digital operation with switchable driver's cab and engine lighting The Prussian State Railways developed the P8 passenger train locomotive in response to the growing demand for passenger and express train services. By 1923, German manufacturers had already built more than 3,700 of these versatile, triple-coupled locomotives. Later designated Class 38.10–40, the steam locomotive had an output of 880 kW, weighed approximately 130 tonnes with tender and full supplies, and could reach speeds of 100 km/h forwards and 50 km/h in reverse. Repainting the extensive DRG steam locomotive fleet in the new standard black-and-red livery naturally took some time. Consequently, many locomotives remained in the olive green/reddish brown/black colour scheme until around 1930, despite it having been discontinued in 1926. However, they had already been fitted with the new identification plates.
- Sound
On order, shipped within 10-15 days
Steam locomotive 38 2833 of the Deutsche Reichsbahn. Edition model! Driver's cab without roof-top attachment Version with Giesl ejector Wheels with fine spokes Version with riveted tender and Witte smoke deflectors Stationed at Railway Mangement Erfurt, Saalfeld depot Two taillights only on the tender Driver's cab and valve gear lighting installed; can be switched in digital operation In the German Democratic Republic (GDR), the P 8 locomotives were converted to feature the Giesl flat ejector, a modification referred to by the staff as "Quetschesse." During performance tests conducted at a speed of 50 km/h, it was demonstrated that this modification resulted in a 14% reduction in coal consumption compared to locomotives equipped with a regulated vacuum brake system. Between 1966 and 1967, a total of 75 locomotives were rebuilt at the depot "Einheit" in Leipzig. Their operation was limited to the three Reichsbahn directorates of Cottbus, Erfurt, and Magdeburg. From these locations, the locomotives were primarily deployed for passenger transport, often pulling Reko coaches and other types of wagons.
On order, shipped within 10-15 days
Steam locomotive 38 2833 of the Deutsche Reichsbahn. Edition model! Driver's cab without roof-top attachment Version with Giesl ejector Wheels with fine spokes Version with riveted tender and Witte smoke deflectors Stationed at Railway Mangement Erfurt, Saalfeld depot Two taillights only on the tender Switchable driver's cab and valve gear lighting in digital mode With authentic dynamic steam from the chimney In the German Democratic Republic (GDR), the P 8 locomotives were converted to feature the Giesl flat ejector, a modification referred to by the staff as "Quetschesse." During performance tests conducted at a speed of 50 km/h, it was demonstrated that this modification resulted in a 14% reduction in coal consumption compared to locomotives equipped with a regulated vacuum brake system. Between 1966 and 1967, a total of 75 locomotives were rebuilt at the depot "Einheit" in Leipzig. Their operation was limited to the three Reichsbahn directorates of Cottbus, Erfurt, and Magdeburg. From these locations, the locomotives were primarily deployed for passenger transport, often pulling Reko coaches and other types of wagons.
On order, shipped within 10-15 days
Narrow-gauge steam locomotive 0399 004 of the Austrian Federal Railways. As in service in the 1990s with the Waldviertel Narrow-Gauge Railways Lettering with computerised number With colour-contrasting boiler rings The narrow-gauge steam locomotive 0399 004 of the Austrian Federal Railways belonged to the tried-and-tested Class 399, whose locomotives were originally procured as Class Mh for the Lower Austrian Provincial Railways. The locomotive that later became 399.04 was built in 1906 by the Krauss locomotive works in Linz and was initially used as Mh.4. Following the electrification of the Mariazell Railway, these powerful supporting-tender locomotives found a new role on the Waldviertel narrow-gauge railways, where they became indispensable, particularly for freight traffic. The 760 mm-gauge locomotives were characterised by four coupled driving axles, two trailing axles and a level of performance that was remarkable for narrow-gauge railways. With a top speed of 40 km/h, 399.04 proved its worth over decades on the demanding routes around Gmünd, Groß Gerungs and Heidenreichstein. Following the introduction of computer-compatible running numbers, 399.04 was eventually designated 0399 004. It thus represents one of Austria’s most historic narrow-gauge steam locomotives, remaining closely associated with the Waldviertel narrow-gauge railways even after the end of scheduled steam operations in 1986.
Pre-order, release expected in Q3 2027
Electric locomotive Re 420 257 of the SBB Cargo. Elaborate printing Finely-detailed, separately attached ventilation grilles and windscreen wipers made from etched sheet Pantographs with invisible fastening Design with retrofitted air conditioning Z21 driver’s cab available Since September 2020, the Re 420 257 has been advertising the environmentally-friendly collaborations in recycling economy between the companies SBB Cargo, ACTS and Spross. This recycling economy is characterised by the efficient use of raw materials for as long a period as possible. If material and product cycles are successfully closed, then raw materials can be repeatedly reused. Both the environment and the economy profit from this achievement.
On order, shipped within 10-15 days
Narrow-gauge steam locomotive 0399 004 of the Austrian Federal Railways. As in service in the 1990s with the Waldviertel Narrow-Gauge Railways Lettering with computerised number With colour-contrasting boiler rings With authentic sound functions The narrow-gauge steam locomotive 0399 004 of the Austrian Federal Railways belonged to the tried-and-tested Class 399, whose locomotives were originally procured as Class Mh for the Lower Austrian Provincial Railways. The locomotive that later became 399.04 was built in 1906 by the Krauss locomotive works in Linz and was initially used as Mh.4. Following the electrification of the Mariazell Railway, these powerful supporting-tender locomotives found a new role on the Waldviertel narrow-gauge railways, where they became indispensable, particularly for freight traffic. The 760 mm-gauge locomotives were characterised by four coupled driving axles, two trailing axles and a level of performance that was remarkable for narrow-gauge railways. With a top speed of 40 km/h, 399.04 proved its worth over decades on the demanding routes around Gmünd, Groß Gerungs and Heidenreichstein. Following the introduction of computer-compatible running numbers, 399.04 was eventually designated 0399 004. It thus represents one of Austria’s most historic narrow-gauge steam locomotives, remaining closely associated with the Waldviertel narrow-gauge railways even after the end of scheduled steam operations in 1986
Pre-order, release expected in Q3 2027
Steam locomotive 94 1670 of the Deutsche Reichsbahn. Driver's cab roof with large ventilator attachment Version with welded water boxes With Riggenbach-type counterpressure brake Based at Rbd Erfurt, Bw Meiningen The T 16.1 (later designated class 94.5) was a goods train tender locomotive of the Royal Prussian State Railway. A total of 1.236 locomotives of this series were built between 1913 and 1924, including follow-up orders by the Deutsche Reichsbahn. Due to their high efficiency, the series locomotives were not only found on branch lines and used for shunting but were also able to replace the cost-intensive cogwheel operations on steep lines running by adhesion. For use on steep lines, e.g. in the Thuringian Forest, the locomotives were fitted with a Riggenbach-type counterpressure brake. The main components of the brake were located on the right-hand side of the smoke chamber.
On order, shipped within 10-15 days
Steam locomotive class 94.5-18 of the Deutsche Reichsbahn-Gesellschaft. Model with riveted water tanks Delicate control unit Fine, free-standing pipes on the boiler The T 16.1 (later designated class 94.5-18) was a goods train tender locomotive of the Royal Prussian State Railway. It was also procured by the Reichseisenbahn Elsaß-Lothringen. A total of 1.236 locomotives of this series were built between 1913 and 1924, including follow-up orders by the Deutsche Reichsbahn. Due to their high efficiency, the series locomotives were not only found on branch lines and used for shunting but were also able to replace the cost-intensive cogwheel operations on steep lines running by adhesion.
On order, shipped within 10-15 days
Steam locomotive 086 400 of the Deutsche Bundesbahn. New design! Variant with De Limon wheel flange lubrication Coal box with welded attachment (as delivered in 1972) Leading and trailing wheelset with 9 spokes With DB reflex lamps At the end of the Second World War, 386 class 86 locomotives were on West German territory. Most of them could be repaired, so by 1952, the DB had 378 locomotives in its fleet. In addition to the classic branch line trains, they were regularly used to haul express trains and for shunting in freight yards. The last DB locomotives were withdrawn from service in 1974 and designated class 086.
On order, shipped within 10-15 days
Czechoslovak State Railways steam locomotive 455 244. Variant! Version with twin-headlight front lighting Distinctive star on the firebox door Exposed piping Long, cut-out water tanks The CSD Class 455.2 referred to former German DRG Class 86 steam locomotives that remained in Czechoslovakia after the Second World War and were taken over by the CSD. These were tank locomotives with the 1’D1’ wheel arrangement, originally developed for branch lines, freight trains and mixed services. With the CSD, these locomotives operated from 1945 as Class 455.2; there were around 26 locomotives in total.
Pre-order, release expected in Q1 2027
Polish State Railways TKt3 21 steam locomotive. Finely detailed model with many separately applied plug-in parts With delicately printed white wheel rims Leading and trailing wheel sets with 7 spokes Between 1928 and 1943, a total of 775 Class 86 steam locomotives were delivered to the Reichsbahn. After 1945, 44 locomotives of this class were in service with the PKP. The 1,000 hp locomotives were designed for a speed of 70–80 km/h. In addition to their main area of operation on ‘secondary lines’ with freight and passenger trains, they were also used for shunting. In 1975, the last locomotive of this class was withdrawn from service by the PKP.
Pre-order, release expected in Q1 2027
Steam locomotive 44 139 of the Deutsche Reichsbahn-Gesellschaft. Photographic finish "Wagner" wind deflectors Finely detailed model with many separately applied parts
On order, shipped within 10-15 days