C track H0
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 171.7 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Prototypical appearance with ballast, sleepers and rails made of metal Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track ballast end piece combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Plug-in track end piece for the ballast bed of the Trix C tracks. Secure snap-in connection. For line ends, sidings as well as display and showcase presentation tracks. Length 16.5 mm. Pack of 10 pieces. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
Content: 10 pc. (CHF 1.15 / 1 pc.)
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 188.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired and, with special transition tracks, even combined with old track systems. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability. Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 70.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 94.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix straight H0 track with a length of 229.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix straight H0 track with a length of 236.1 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 track with a length of 77.5 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius of 515 mm / arc of 30°. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius R5 of 643.6 mm / arc of 30°. Parallel track to radius R4 at a spacing of 64.3 mm. 12 tracks form a circle with an outside diameter of 133 cm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix straight H0 track with a length of 360 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Quick assembly and dismantling thanks to the stable click connection, even on a carpet Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 1114.6 mm / curve of 12.1°. Counter-curve for slim points. Also suitable for building gently sweeping lines. The click connection with the "Click". Assembled and dismantled in no time. Stable and durable. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius R4 of 579.3 mm / arc of 30°. Parallel track to radius R3 at a spacing of 64.3 mm. 12 tracks form a circle with an outside diameter of 120 cm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 360 mm / arc of 30°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Prototypical appearance Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius R3 of 515 mm / 15°. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 437.5 mm / arc of 5.7°. Extends the point arc to 30°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 360 mm / arc of 15°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 360 mm / arc of 7.5°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 437.5 mm / arc of 7.5°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius of 437.5 mm / arc of 30°. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 437.5 mm / arc of 15°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius of 437.5 mm / arc of 24.3°. Corresponds to the point curve. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 track end with a buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Mounted frame with a buffer beam. The rail profile runs out into the ballast bed. Length 80.5 mm. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days