C track H0
Prototype The Trix H0 uncoupler track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix H0 uncoupler track with a length of 94.2 mm. With a manual switch lever and a built-in electric drive. Suitable for the most important European coupler systems. Suitable for all couplers to NEM and for common close coupler systems. A lighting mast as an uncoupling signal (Märklin 74997) can be plugged in. Connection to a control panel or a digital decoder is possible. The click connection with the "Click". Assembled and dismantled in no time. Stable and durable. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand point with a length of 188.3 mm / arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted
In stock, shipped within 1-3 days
Prototype The Trix H0 slim right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim right-hand point with a length of 236.1 mm / diverging track radius of 1114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. With a length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 left-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand point with a length of 188.3 mm / arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted Quick assembly and dismantling
In stock, shipped within 1-3 days
Prototype The Trix H0 left-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand curved point with an inner curve of 30° / radius of 360 mm (R1). Outer curve 30° at a parallel circle spacing of 77.5 mm. With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted
In stock, shipped within 1-3 days
Prototype The Trix H0 right-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand curved point with an inner curve of 30° / radius of 360 mm (R1). Outer curve 30° at a parallel circle spacing of 77.5 mm. With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. A length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 slim left-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim left-hand point with a length of 236.1 mm / diverging track radius of 1,114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 left-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 right-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. Length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Prototype The Trix H0 double slip point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 double slip point with a length of 188.3 mm / crossing angle = arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever, 74491 electric drive and an illuminated point lantern. Point decoder can be retrofitted. The slip point can be used to the right and to the left. Unambiguous setting for the curved route or the through route. The electric drive and lantern are already installed. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Trix H0 crossing combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Crossing with a length of 103.3 mm, 48.6°. For double track connections or crossing parallel lines. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Trix H0 slim double slip point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim double slip point with a length of 236.1 mm / crossing angle of 12.1°. With a built-in 74491 electric drive. With a manual control lever. 4 tracks 62071 are required at the ends of the double slip point (not included in 62720). 2 matching ballast wedges are included. The 74477 point lantern and 74467 digital decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock: 4 on the shelf, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 transition track with a length of 180 mm. The click connection with the "Click". Assembled and dismantled in no time. Stable and durable. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance. Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on carpet Note *FLEISCHMANN is a brand of Modelleisenbahn München GmbH.
In stock: 2 on the shelf, shipped within 1-3 days
Model The track extension set allows the track plan of all starter sets to be extended functionally. It can be used for parallel track connections, passing loops or refuge sidings, a siding and new lines. Suitable for the Trix starter sets as well as for existing layouts. It can be expanded further with the entire C track programme. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights With Trix C track right from the start: layout operation grows Note Contents: 7 x 62172 straight track 171.7 mm 7 x 62188 straight track 188.3 mm 3 x 62224 curved track R 2 / 24.3° 8 x 62230 curved track R 2 / 30° 2 x 62611 left point 24.3° 1 x 62612 right point 24.3° 1 x 62671 left curved point 30° 1 x 62672 right curved point 30° 1 x 62977 buffer stop 80.5 mm
In stock: 1 on the shelf, shipped within 1-3 days
Special track for connecting Trix C track and conventional Code 83 track with ballast bed. One end with click connection, one end with fishplate. Length 47 mm. Suitable for connecting to track systems with a rail profile height of 2.1 mm (Code 83).
In stock: 1 on the shelf, shipped within 1-3 days
Model Contents: 3 straight tracks 62188, 5 straight tracks 62172, 2 curved tracks 62224, 1 point 62611, 1 point 62612 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the small C track starter set with a passing loop.
On order, shipped within 10-15 days
Model Contents: 7 straight tracks 62188, 7 straight tracks 62172, 2 curved tracks 62130, 1 curved point 62671, 1 curved point 62672 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the C track starter sets with a passing loop with a curved point.
On order, shipped within 10-15 days