Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Minitrix track

Filter products
14% off the recommended price
Minitrix Left Turnout
Trix 14947 Scale N
Minitrix Left Turnout

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, left-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.

Selling price: CHF 40.80 RRP CHF 47.99

In stock: 3 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Left Turnout
Trix 14956 Scale N
Minitrix Left Turnout

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point, left-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.

Selling price: CHF 26.35 RRP CHF 30.99

In stock: 3 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Feeder Track R1 - 30°
Trix 14972 Scale N
Minitrix Feeder Track R1 - 30°

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix connecting track with interference suppression. Required as the first connecting track for every circuit (= controller). Removable connection terminals. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 9.35 RRP CHF 10.99

In stock: 3 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Rerailer Length 104.2 mm / 4-1/8"
Trix 14974 Scale N
Minitrix Rerailer Length 104.2 mm / 4-1/8"

Prototype The Minitrix re-railing device combines robustness, electrically reliable connections and a prototypical appearance. Model For re-railing derailed vehicles while running. Minitrix re-railing device with a length of 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with metal rails

Selling price: CHF 4.20 RRP CHF 4.89

In stock: 3 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Adapter Track Length 59.0 mm / 2"
Trix 14999 Scale N
Minitrix Adapter Track Length 59.0 mm / 2"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix transition track for connecting to the Arnold* track system, with a length of 59.0 mm. The click connection. Set up and taken down in no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down Note *ARNOLD is a trademark of Hornby Hobbies Limited 2021, Great Britain.

Selling price: CHF 4.95 RRP CHF 5.79

In stock: 3 on the shelf, shipped within 1-3 days

14% off the recommended price New
Minitrix Crossing - 30° with Concrete Ties, Length 104.2 mm / 4-1/8"
Trix 14558 Scale N
Minitrix Crossing - 30° with Concrete Ties, Length 104.2 mm / 4-1/8"

Prototype Concrete tie track is now standard throughout Europe – and that should also apply to model railroads. N gauge is now getting concrete tie track with an NEM-compliant Code 60 rail profile. The track system can be expanded as desired. The ideal track system for beginners and pros. Model Minitrix crossing with a length of 104.2 mm / 4-1/8". The length corresponds to a 14904 Minitrix straight track. Highlights Minitrix solid profile rails with a rail profile to NEM Code 60 Solid profile rails made of a rust-free special alloy Material and track profile provide reliable contact for current transmission to the wheels

Selling price: CHF 17.00 RRP CHF 19.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Uncoupler Track with Concrete Ties Length 76.3 mm / 3"
Trix 14569 Scale N
Minitrix Uncoupler Track with Concrete Ties Length 76.3 mm / 3"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix uncoupler track with a length of 76.3 mm. Locomotives and wagons can be uncoupled by remote control with it. The electromagnetic drive is operated with the Märklin 72710 or 72720 control panel. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Crossing - 15° with Concrete Ties Length 129.8 mm / 5-1/8"
Trix 14573 Scale N
Minitrix Crossing - 15° with Concrete Ties Length 129.8 mm / 5-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model The 15° crossing is designed so that the two intersecting tracks are completely electrically isolated from each other. This crossing can therefore be used as desired, including on loop lines and on intersecting lines with separate circuits. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel

Selling price: CHF 19.55 RRP CHF 22.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Left Turnout Length 112.6 mm / 4-7/16"
Trix 14938 Scale N
Minitrix Left Turnout Length 112.6 mm / 4-7/16"

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix left-hand point 15° with a polarised common crossing. Straight track 112.6 mm. The click connection with the "Click". Set up and taken down in next to no time. Stable and durable. Curve radius = R 4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down Note The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point.

Selling price: CHF 34.85 RRP CHF 40.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Right Turnout
Trix 14948 Scale N
Minitrix Right Turnout

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, right-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.

Selling price: CHF 40.80 RRP CHF 47.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Left Turnout Length 112.6 mm / 4-7/16"
Trix 14954 Scale N
Minitrix Left Turnout Length 112.6 mm / 4-7/16"

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix point 15°. For particularly slim point formations. Straight track 112.6 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Right Curved Turnout
Trix 14957 Scale N
Minitrix Right Curved Turnout

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Minitrix curved point, right-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix system: combining the Minitrix track systems with one another is possible at any time thanks to transition tracks. Perfect connection: the mechanical and electrical connection between two tracks is not visible from the outside. The line thereby looks as though made from a single length, just as on the prototype. Special fishplates are not needed. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the track down. It can thus be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for the installation of electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with ballast, sleepers and metal rails Quick assembly and dismantling thanks to the stable click connection, even on carpet Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.

Selling price: CHF 26.35 RRP CHF 30.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Electric Double Slip Switch - 15° Length 129.8 mm / 5-1/8"
Trix 14960 Scale N
Minitrix Electric Double Slip Switch - 15° Length 129.8 mm / 5-1/8"

Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix straight track with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 4 -15° + 2 x 14903. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 63.75 RRP CHF 74.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Electric Double Slip Switch - 30° Length 104.2 mm / 4-1/8"
Trix 14968 Scale N
Minitrix Electric Double Slip Switch - 30° Length 104.2 mm / 4-1/8"

Prototype The Minitrix crossing combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 1 - 30°. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 62.90 RRP CHF 73.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Crossing - 15° Length 129.8 mm / 5-1/8"
Trix 14973 Scale N
Minitrix Crossing - 15° Length 129.8 mm / 5-1/8"

Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix crossing with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 17.00 RRP CHF 19.99

In stock: 2 on the shelf, shipped within 1-3 days

Right-hand curved point
Trix 14983
Right-hand curved point

Curved points R3/R4. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and a curve angle of 30° can be taken into account. The track layout is therefore considerably slimmer. Nevertheless, the space required is still not too great, even for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. Stop-point function optional. An electric drive can be retrofitted.

Regular price: CHF 28.40

In stock: 2 on the shelf, shipped within 1-3 days

Left-hand curved point
Trix 14981
Left-hand curved point

Curved points R3/R4. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and a curve angle of 30° can be taken into account. The track layout is therefore considerably slimmer. Nevertheless, the space required is still not too great, even for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. Stop-point function optional. An electric drive can be retrofitted.

Regular price: CHF 28.40

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
H1 Track Extension Set
Trix 14311 Scale N
H1 Track Extension Set

Model The track extension set H1 can be used to expand the track plan of the current starter sets. Can be expanded seamlessly with the entire Minitrix track programme. All of the points can be fitted later with the 14934/14935 electric point motors. Note Contents: 2 x 14903 straight track 17.5 mm. 10 x 14904 straight track 104.2 mm. 1 x 14905 straight track 76.3 mm. 6 x 14906 straight track 54.2 mm. 1 x 14909 straight track 33.6 mm. 1 x 14927 curved track R 4 - 15°. 1 x manual uncoupler track (not available separately). 2 x 14938 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14939 right-hand point R 4 - 15° with a polarised common crossing. 1 x 14991 buffer stop 50.0 mm. Example for expansion: 11146 with 14311 150 x 60 cm / 60" x 24" recommended baseboard size

Selling price: CHF 143.65 RRP CHF 169.00

On order, shipped within 10-15 days

15% off the recommended price
H2 Track Extension Set
Trix 14312 Scale N
H2 Track Extension Set

Model The track extension set H2 can be used to expand the track plan of the current starter sets already fitted with the track extension set H1. Can be expanded seamlessly with the entire Minitrix track programme. All of the points can be fitted later with the 14934/14935 electric point motors. Note Contents: 8 x 14904 straight track 104.2 mm. 3 x 14906 straight track 54.2 mm. 12 x 14910 curved track R 2a – 30°. 1 x 14938 left-hand point R 4 – 15° with a polarised common crossing. 1 x 14939 right-hand point R 4 – 15° with a polarised common crossing. Example for expansion: 11146 and 14311 with 14312 50 x 60 cm / 60" x 24" recommended baseboard size

Selling price: CHF 114.75 RRP CHF 135.00

On order, shipped within 10-15 days

15% off the recommended price
B1 Track Extension Set
Trix 14321 Scale N
B1 Track Extension Set

Model The track extension set B1 can be used to expand the track plan of the current starter sets. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 2 x 14500 straight track 112.6 mm. 2 x 14503 straight track 17.5 mm. 8 x 14504 straight track 104.2 mm. 4 x 14594 straight track 126.3 mm. 1 x 14518 curved track R 5 - 15°. 1 x manual uncoupler track (not available separately). 2 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. 1 x 14591 buffer stop 50.0 mm. Example for expansion: 11161 with 14321 150 x 60 cm / 60" x 24" Recommended baseboard size for the layout with the starter set and the B1 and B2 extensions.

Selling price: CHF 143.65 RRP CHF 169.00

On order, shipped within 10-15 days

15% off the recommended price
B2 Track Extension Set
Trix 14322 Scale N
B2 Track Extension Set

Model The track extension set B2 expands the track plan of the current starter sets that have already been fitted with the track extension set B1. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 1 x 14500 straight track 112.6 mm. 4 x 14504 straight track 104.2 mm. 2 x 14593 straight track 108.4 mm. 2 x 14594 straight track 126.3 mm. 12 x 14510 curved track R 2a – 30°. 1 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. Example for expansion: 11161 and 14321 with 14322 (external dimensions: approx. 139 x 53 cm) Recommended baseboard size: 150 x 60 cm / 60" x 24"

Selling price: CHF 114.75 RRP CHF 135.00

On order, shipped within 10-15 days

14% off the recommended price
Minitrix Electric Turnout Mechanism for a Left Turnout with Concrete Ties
Trix 14534 Scale N
Minitrix Electric Turnout Mechanism for a Left Turnout with Concrete Ties

(Below-baseboard mounting on the right).

Selling price: CHF 20.40 RRP CHF 23.99

Pre-order, release expected in December 2026

14% off the recommended price
Minitrix Electric Turnout Mechanism for a Right Turnout with Concrete Ties
Trix 14535 Scale N
Minitrix Electric Turnout Mechanism for a Right Turnout with Concrete Ties

(Below-baseboard mounting on the left).

Selling price: CHF 20.40 RRP CHF 23.99

Pre-order, release expected in December 2026

14% off the recommended price
Minitrix Left Turnout with Concrete Ties
Trix 14547 Scale N
Minitrix Left Turnout with Concrete Ties

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix curved point R3/R4 left-hand with a polarised common crossing and a curve angle of 30°. The track alignment is considerably slimmer. Nevertheless, the space required is still not too great even for smaller layouts. An electric drive can be retrofitted. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.

Selling price: CHF 40.80 RRP CHF 47.99

Pre-order, release expected in November 2026