Rolling Stock
Prototype Heavy double electric locomotive Ae 8/14 "Landilok" of the Swiss Federal Railways (SBB). Basic dark green paint scheme. Version with 2 pantographs. Sleeve buffers with square buffer plates. Locomotive running number 11852. The locomotive looks as it did in the early 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. There is a regulated high-performance motor with a flywheel in each locomotive half. 4 axles powered in each locomotive half. The triple headlights change over with the direction of travel and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can be switched over to 1 red tail lamp when the locomotive is running alone. Double "A" light function. Maintenance-free warm white and red LEDs are used for the lighting. The wrong-line signal, cab lighting and engine room lighting can be controlled digitally. Close couplers guided in a slot at the ends of the locomotive, separable close coupler between the locomotive halves. Detailed roof equipment with roof lines, insulators and roof walks as well as scissors-type pantographs. Both pantographs can be raised and lowered digitally. The minimum radius for operation is 360 mm. The cut-outs in the front aprons next to the standard pocket can be closed with the filler pieces included. Brake hoses and imitation screw couplings are included. Length over the buffers 39.1 cm. Highlights Completely new tooling Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Red permission-to-proceed signal can also be controlled digitally Buffer height to NEM standards
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Electric locomotive, series Be 6/8 II "Krokodil" of the Swiss Federal Railways (SBB). Type from the first production series. Basic fir green paint scheme. With 2 cab doors, wide shunting steps on the engine hoods and bow-shaped grab rails, sleeve buffers, without transition plates, with a wrong-line signal and Signum-Integra magnets. Locomotive running number 13254. The locomotive looks as it did between 1960 and 1965. Model The locomotive has a digital decoder and extensive sound functions. It also has 2 regulated high-performance drives with flywheels, 1 motor in each drive bogie. 3 axles and a jackshaft powered in each. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details. 3-part locomotive body with engine hoods that swing out. Detailed roof equipment with a safety grille below the pantographs. Length over the buffers 22.3 cm. Highlights Highly detailed metal version Prototypically adapted details with only 2 cab doors and wide shunting steps Locomotive with 2 high-performance drives and flywheels With a RailCom-capable DCC/mfx digital decoder and a variety of operating and sound functions
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Electric locomotive Ae 610 of SBB Cargo. Basic ultramarine blue and fire red paint scheme. Running number 610 519-1 with the Giubiasco town coat of arms. The locomotive looks as it did starting in 2005. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each of the two bogies are powered. Traction tyres. The triple headlights change over with the direction of travel and one white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. Other light functions that can be controlled separately: switching over to one red tail lamp, switching over to two red tail lamps, switching over to the warning signal and the shunting light. The cab and engine room lighting can be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many applied details such as grab rails of metal. Close coupling mechanism. Closed covers for the pilot are included as separate plug-in parts. Length over the buffers 21 cm. Highlights Centre motor with drive on four axles Cab and engine room lighting can be controlled digitally Numerous light functions can be controlled separately digitally Many separately applied details Close coupling mechanism Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Electric locomotive Ae 6/8 of the Bern-Lötschberg-Simplon Railway (BLS). Locomotive from the 2nd production series. Basic dark brown paint scheme with black running gear. Version in the original condition with 2 pantographs and braking resistors in the engine room. With transition plates on the ends and a wrong-line signal. Signum-Integra magnet at locomotive end II. 4 engine room windows and a louvred ventilation grille on each side. Locomotive running number 207. The locomotive looks as it did in the late 1940s/early 1950s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Both outer driving wheelsets in each drive bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and 1 white tail lamp (Swiss lighting changeover) will work in conventional operation and can be controlled digitally. The lighting can be switched over to 1 red tail lamp when the locomotive is running alone. The wrong-line signal can be controlled separately digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Additional cab lighting, driver's desk lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Highly detailed metal version with many separately applied details. The minimum radius for operation is 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers 23.3 cm. Highlights Completely new tooling Locomotive from the 2nd production series with the locomotive number 207 Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab, driver's desk and engine room lighting can be controlled digitally With a buffer capacitor to bridge short sections without power Buffer height to NEM standards Note A matching goods wagon set can be found under item no. 46575 in the Märklin H0 assortment, with information about the DC wheelsets required.
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Heavy goods train steam locomotive, series 150 X, with a standard design coal tender 2´2´T34 of the French State Railways (SNCF). Basic black paint scheme. With an ÜK cab and without smoke deflectors. Locomotive running number 150 X 192. The locomotive looks as it did around 1958. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 5 axles powered. Traction tyres. The locomotive and coal tender are largely constructed of metal. The 7226 smoke unit can be installed in the locomotive. The dual headlights change over with the direction of travel and the retrofittable smoke unit will work in conventional operation and can be controlled digitally. The cab lighting, firebox flickering and flickering at the ash pan can also each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Close coupler with a guide mechanism between the locomotive and tender. There is a close coupler with a guide mechanism and an NEM pocket at the rear of the tender and at the front of the locomotive. The minimum radius for operation is 360 mm. Piston rod protective sleeves, brake hoses and imitation screw couplings are included. Length over the buffers 26 cm. Highlights Prototypical changes to the tooling With a digital decoder and a variety of operating and sound functions Cab lighting, firebox flickering and flickering at the ash pan can be controlled digitally Open bar frame with a largely unobstructed view between the running gear and the boiler High-performance motor with a flywheel in the boiler Note A matching car transport wagon set can be found under item no. 46408 in the Märklin H0 assortment, with information about the DC wheelsets required.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype EC 250 electric high-speed multiple unit as the RABe 501 "Giruno" of the Swiss Federal Railways (SBB). 1 end car A (Bt1), 2nd class. 1 intermediate car F (B7), 2nd class, with entrances for the handicapped and a pantograph. 1 intermediate car G (WR6), with a restaurant area. 1 intermediate car H (A5), 1st class, with entrances for the handicapped and a pantograph. 1 end car L (At2), 1st class. In use as a multi-system multiple unit between Zurich Airport and Basel as well as across the Alps through the Gotthard Base Tunnel as far as Milan. Approval also planned for Germany and Austria. Train number RABe 501 003, with the "San Gottardo" coat of arms. Current operating condition 2022. Model 5-part base set. The restaurant car G and the two intermediate cars F and H arranged to the left and right of it are permanently coupled to one another by means of the Jacobs bogies. The unit has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted in the restaurant car. All 4 axles in both Jacobs bogies to the left and right of the restaurant car powered using cardan shafts. Traction tyres. The cabs in the end cars have interior details. Power supply by way of the leading end car, depending on the direction of travel. Guide mechanism in the Jacobs bogies. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. They can be changed over to a single white tail lamp (Swiss lighting changeover). Additional separately controllable light functions. Interior lighting fitted as standard. The interior lighting is supplied by way of the continuous electrical connection running through the whole train. In addition, the cab lighting and the driver's desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for all of the lighting. The pantographs on the intermediate cars F and H can each be raised and lowered separately as a digital function. True-to-scale reproduction. The minimum radius for operation is 360 mm. Length of the base set approximately 112 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. LED interior lighting fitted as standard Cab lighting and driver's desk lighting can be controlled digitally Pantographs on the intermediate cars F and H can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions Train number RABe 501 003, with the "San Gottardo" coat of arms Note The 5-part base set 25810 can be expanded with the 2-part add-on car sets 23281, 23282, and 23283 to make a prototypical 11-part multiple unit.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Electric locomotive Re 420 of the Swiss Federal Railways (SBB), SBB Cargo division. Special adhesive livery for the "175 Years of Swiss Railways" anniversary in 2022. Running number Re 420 251-1. Operating condition 2022. Highlights Attractive advertising livery for "175 Years of Swiss Railways". Centrally mounted motor and all 4 axles powered using cardan shafts. With a wide range of light and sound functions. Product description Model: With mfx digital decoder and extensive sound functions. Regulated high-performance drive with flywheel, centrally mounted. 4 axles powered using cardan shafts. Traction tyres. Triple headlights and 1 white tail lamp (Swiss lighting changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. Lighting can be switched, when running solo, to 1 red tail lamp, or to 2 red tail lamps when running solo in Germany. The headlights at locomotive end 2 and end 1 can each be switched off separately digitally. When the headlights are switched off at both ends of the locomotive, the double "A" light function operates at both ends as a red emergency stop signal. Long-distance headlight, cab lighting and engine room lighting can each be controlled separately digitally. Lighting with maintenance-free warm white and red LEDs. Fitted metal handrails. Couplings can be exchanged for the front aprons supplied. Length over the buffers 17.1 cm. You will find this model in an AC version in the Märklin H0 range under item number 37875.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Southern Pacific steam locomotive with a 2-8-4 "Berkshire" wheel arrangement. Basic deep black paint scheme. Running number 3505. The locomotive looks as it did between 1945 and 1950. One of 25 locomotives built with the distinctive Coffin feedwater heater. Model With a digital decoder and extensive light and sound functions. Regulated high-performance motor with a flywheel in the boiler. Four axles powered, three of them via side rods. Traction tires. Locomotive and tender made largely of metal. Factory-installed smoke generator with speed-dependent, dynamic smoke output, can be controlled digitally. Headlights changing over with the direction of travel, with one lamp each on the locomotive and tender, will work in conventional operation and can be controlled digitally. Cab and number board lighting as well as firebox flickering can be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Adjustable close coupling with a guide mechanism between the locomotive and tender. Close coupler with a guide mechanism and an NEM pocket on the tender. Engineer and fireman figures seated in the cab. Piping for the area below the cab is included as separate parts to be plugged in. Length approx. 31.3 cm / 12-5/16". Highlights Completely new tooling Especially delicate metal construction Many separately applied details Factory-installed smoke generator with speed-dependent, dynamic smoke output Cab lighting can be controlled digitally Engineer and fireman figures seated in the cab Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power
- 2-rail, direct current
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Pair of open wagons with hinged covers KK 15, permanently coupled, used as a permanent way vehicle. Livery of Era III. Product description Model: Both wagons with attached track-cleaning equipment. Each has a vertically movable metal block with cleaning surfaces of polishing felt inserted in parallel. Cleaning surfaces are replaceable and washable. Hinged covers can be opened. Close couplings guided in a slot. Both wagons connected with a plug-in coupling. Length over the buffers 15.3 cm. The gentle cleaning method is also suitable for rails made of nickel silver or brass. The track-cleaning wagon 33966 is made exclusively for Trix Club members with 10 years of membership. E700580 Trix DC wheelset. E700150 Märklin AC wheelset.
In stock: 1 on the shelf, shipped within 1-3 days
Club members only (Trix Club)
FS Taems type goods van prototype, the only example delivered with the television logo (1982).
On order, lead time to be confirmed
FS Taems coach from the 300 series, in the early service phase.
On order, lead time to be confirmed
Sggrss '80 bimodal intermodal wagon "AAE Cargo" with "MSC" containers.
On order, lead time to be confirmed
Sggrss intermodal car '80 twin-module "VTG" with "MSC" containers.
On order, lead time to be confirmed
Sggrss intermodal car '80 two-module "VTG" with "MSC" containers.
On order, lead time to be confirmed
Sggrss intermodal wagon '80 with double "AAE Cargo" body and "MSC" containers.
On order, lead time to be confirmed
Sggmrss 90' GTS Rail intermodal wagon with "Alberti e Santi" containers.
On order, lead time to be confirmed
Wascosa intermodal wagon Type Sggmrss 90' with box containers "CL 45" and "A2B-Online".
On order, lead time to be confirmed
Articulated intermodal wagon Type Sggmrss 90' of Wascosa with mobile containers "H. Essers".
On order, lead time to be confirmed
New-build Sggmrss 90' Ermewa intermodal wagon, with two covered mobile tanks "STANTE".
On order, lead time to be confirmed
Newly built Sggmrss 90' MFD Rail intermodal well wagon, with two "EMB" containers.
On order, lead time to be confirmed
CEMAT 60-foot Sgnss intermodal wagon, loaded with "Lugo Terminal" box container.
On order, lead time to be confirmed
Sgnss 60' GTS intermodal container wagon, with a "Codognotto" box container.
On order, lead time to be confirmed
New-build Sggmrss 90' MFD Rail intermodal car, with two "Sarp Intermodal" box containers.
On order, lead time to be confirmed
New-build intermodal wagon, type Sggmrss 90', Ermewa, with two mobile containers "TAB Rail Road" and "Transalliance".
On order, lead time to be confirmed