Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rolling Stock

Locomotives, multiple units, coaches and wagons, new and pre-owned, from Z to G, checked by modellers.
Filter products
TT 4-axle container flat wagon, grey, loaded with 2 x 20' tank containers, DB SCHENKER, Era VI
Arnold HN9768 Scale TT
TT 4-axle container flat wagon, grey, loaded with 2 x 20' tank containers, DB SCHENKER, Era VI

4-axle container wagon, grey livery, loaded with 2 x 20' tank containers “DB SCHENKER”, Era VI. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 55.95 RRP CHF 58.90

On order, lead time to be confirmed

TT Transfesa 3-axle car-carrier wagon Mega Car Carrier, blue, with original logo, Era V
Arnold HN9769 Scale TT
TT Transfesa 3-axle car-carrier wagon Mega Car Carrier, blue, with original logo, Era V

Transfesa, 3-axle car transporter “Mega Car Carrier”, blue with original logo, Era V. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 79.70 RRP CHF 83.90

Pre-order, release expected in December 2026

TT STVA 3-axle car-carrier wagon Laes TA 370 M red with STVA logo, Era VI
Arnold HN9770 Scale TT
TT STVA 3-axle car-carrier wagon Laes TA 370 M red with STVA logo, Era VI

STVA, 3-axle car transporter Laes TA 370 M, red with a large STVA logo, Era VI. Finely engraved loading surfaces, NEM coupler pocket with close-coupling mechanism, length over buffers 221 mm. TT scale (1:120), 2-rail DC, without digital or sound technology.

Selling price: CHF 79.70 RRP CHF 83.90

Pre-order, release expected in December 2026

TT F-GEFCO 3-axle car-carrier wagon Ladks, blue with advertising panel, Era VI
Arnold HN9771 Scale TT
TT F-GEFCO 3-axle car-carrier wagon Ladks, blue with advertising panel, Era VI

F-GEFCO, 3-axle van transporter Ladks, blue livery with inscription boards, Era VI. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 75.90 RRP CHF 79.90

Pre-order, release expected in December 2026

TT SNCF 3-axle car-carrier wagon Ladks grey with GEFCO lettering, Era IV
Arnold HN9772 Scale TT
TT SNCF 3-axle car-carrier wagon Ladks grey with GEFCO lettering, Era IV

SNCF, 3-axle van transporter Ladks, grey livery with inscription boards “GEFCO”, Era IV. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 75.90 RRP CHF 79.90

Pre-order, release expected in December 2026

TT MILLET 2-piece set of 4-axle silo wagons, blue, Era VI
Arnold HN9773 Scale TT
TT MILLET 2-piece set of 4-axle silo wagons, blue, Era VI

MILLET, 2-unit pack of 4-axle round-sided cereal hopper wagons, blue livery, Era VI. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 79.70 RRP CHF 83.90

On order, lead time to be confirmed

TT D-WASCOSA 2-piece set of 4-axle silo wagons in orange with large WASCOSA logo, Era VI
Arnold HN9774 Scale TT
TT D-WASCOSA 2-piece set of 4-axle silo wagons in orange with large WASCOSA logo, Era VI

D-WASCOSA, 2-unit pack of 4-axle silo wagons, orange livery with big “WASCOSA” logo, Era VI. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 79.70 RRP CHF 83.90

On order, lead time to be confirmed

TT F-ERSA 4-axle grain silo wagon with graffiti, Interfracht, Era VI
Arnold HN9775 Scale TT
TT F-ERSA 4-axle grain silo wagon with graffiti, Interfracht, Era VI

F-ERSA, 4-axle round-sided cereal hopper wagon, “Interfracht”, with bird graffiti, Era VI. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 47.40 RRP CHF 49.90

On order, lead time to be confirmed

TT DR 2-axle refrigerated van KIM Broiler Era IV
Arnold HN9777 Scale TT
TT DR 2-axle refrigerated van KIM Broiler Era IV

DR, 2-axle refrigerated wagon “KIM Broiler”, Era IV. TT scale (1:120), close coupler, minimum radius 310 mm.

Selling price: CHF 38.85 RRP CHF 40.90

On order, lead time to be confirmed

DB V51 902 diesel locomotive
BEMO 1001802 Scale H0e
DB V51 902 diesel locomotive

On metre-gauge track from Nagold to Altensteig, the first narrow-gauge train of the Royal Württemberg State Railways (K.W.St.E.) ran under steam in 1891. In the years that followed, the K.W.St.E. opened the Bottwar Valley Railway Marbach–Heilbronn Süd, the Zabergäu Railway Lauffen–Leonbronn, and the two Upper Swabian lines Schussenried–Riedlingen and Biberach–Ochsenhausen – all with a gauge of 750 mm. Initially, the K.W.St.E. relied on various steam locomotive designs with Klose valve gear. From 1898 to 1913 came the Mallet locomotives Tssd, also supplied by Maschinenfabrik Esslingen. These, along with some sä. VI K locomotives taken over from Saxony or rebuilt by the DRG, shaped the scene for a long time. Even the five V51/V52 diesel locomotives supplied by Gmeinder in 1964 for 750 mm and metre gauge respectively could not prevent the decline of the romantic railways in Upper Swabia, the Neckar valley and the Black Forest: from the mid to late 1960s, the end came for the five Württemberg DB narrow-gauge railways; only freight traffic on the "Öchsle" continued until 1983. On what was once the last DB narrow-gauge railway on the mainland, an attractive heritage railway operation was established.

Regular price: CHF 204.60

On order, shipped within 10-21 days

DB 251 901 diesel locomotive
BEMO 1001811 Scale H0e
DB 251 901 diesel locomotive

On metre-gauge track from Nagold to Altensteig, the first narrow-gauge train of the Royal Württemberg State Railways (K.W.St.E.) ran under steam in 1891. In the years that followed, the K.W.St.E. opened the Bottwar Valley Railway Marbach–Heilbronn Süd, the Zabergäu Railway Lauffen–Leonbronn, and the two Upper Swabian lines Schussenried–Riedlingen and Biberach–Ochsenhausen – all with a gauge of 750 mm. Initially, the K.W.St.E. relied on various steam locomotive designs with Klose valve gear. From 1898 to 1913 came the Mallet locomotives Tssd, also supplied by Maschinenfabrik Esslingen. These, along with some sä. VI K locomotives taken over from Saxony or rebuilt by the DRG, shaped the scene for a long time. Even the five V51/V52 diesel locomotives supplied by Gmeinder in 1964 for 750 mm and metre gauge respectively could not prevent the decline of the romantic railways in Upper Swabia, the Neckar valley and the Black Forest: from the mid to late 1960s, the end came for the five Württemberg DB narrow-gauge railways; only freight traffic on the "Öchsle" continued until 1983. On what was once the last DB narrow-gauge railway on the mainland, an attractive heritage railway operation was established.

Regular price: CHF 204.60

On order, shipped within 10-21 days

RüBB 251 901 diesel locomotive
BEMO 1001852 Scale H0e
RüBB 251 901 diesel locomotive

Last year, the Rügensche BäderBahn (RüBB) repainted its V51 901, originally built for lines in Württemberg, and gave it DB lettering from Era IV. We present the model as a new announcement for 2025, accompanied by matching modernised coaches with the RüBB logo. In addition, the Metal Collection standard-design locomotive 99 1781-6, item no. 1017896, is a highlight enriching our RüBB range. These combinations make it possible to faithfully recreate both modern and "nostalgic" railway operation on your layout.

Regular price: CHF 213.90

On order, shipped within 10-21 days

DR 99 732, standard-design locomotive, class 99.73-76, ready-built model
BEMO 1008803 Scale H0e
DR 99 732, standard-design locomotive, class 99.73-76, ready-built model

In 2026, we are producing the standard-design locomotive, class 99.73-76, again, in the version with riveted water tanks, after a pause of more than 20 years. The locomotives built by Hartmann or Schwartzkopff respectively were delivered with electric lighting, or converted to it by the early 1930s. The models are made in early Era III condition: with the original fittings and without a gas tank on the tender. Typical features are the feedwater heater, the air-operated corner valves on the cylinder, and the large turbogenerator. Locomotive 742 has a makeshift smoke box door. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Die-cast gearbox Drive and current pick-up via all driving and coupled axles Couplings are included for fitting

Regular price: CHF 836.00

On order, shipped within 10-21 days

DR 99 742, standard-design locomotive, class 99.73-76, ready-built model
BEMO 1008808 Scale H0e
DR 99 742, standard-design locomotive, class 99.73-76, ready-built model

In 2026, we are producing the standard-design locomotive, class 99.73-76, again, in the version with riveted water tanks, after a pause of more than 20 years. The locomotives built by Hartmann or Schwartzkopff respectively were delivered with electric lighting, or converted to it by the early 1930s. The models are made in early Era III condition: with the original fittings and without a gas tank on the tender. Typical features are the feedwater heater, the air-operated corner valves on the cylinder, and the large turbogenerator. Locomotive 742 has a makeshift smoke box door. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Die-cast gearbox Drive and current pick-up via all driving and coupled axles Couplings are included for fitting

Regular price: CHF 836.00

On order, shipped within 10-21 days

DR 99 757, standard locomotive 99.73-76, ready-built model
BEMO 1008809 Scale H0e
DR 99 757, standard locomotive 99.73-76, ready-built model

In 2026, we are once again producing the standard locomotive 99.73-76 in the version with riveted water tanks, after a break of more than 20 years. The locomotives built by Hartmann or Schwartzkopff were delivered with electric lighting or converted by the early 1930s. The models are made in early Era III condition: with original fittings and without a gas tank on the tender. Typical features are the feedwater heater, the air-operated angle valves on the cylinder and the large turbo generator. Locomotive 742 has a makeshift smoke box door. Model version Small-batch hand-built model in white metal and brass construction Bell-armature motor with flywheel Die-cast gearbox Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 836.00

On order, shipped within 10-21 days

DR 99 750, ready-to-run model
BEMO 1008891 Scale H0e
DR 99 750, ready-to-run model

In 1881, the Royal Saxon State Railway (K.Sä.Sts.B.) opened the first of a total of 30 narrow gauge railways. When building this network, totalling 561 km in length, a gauge of 750 mm was chosen for the majority of the lines. The steep and winding routes soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose mechanism, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had running gear designs that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction arrived – thanks to laterally shifting wheelsets of the Gölsdorf system. Signs of wear forced the DR to modernise and re-boiler some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least due to their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox made of die-cast metal Drive and current pick-up via all driving and coupled axles Couplings included for assembly

Regular price: CHF 836.00

On order, shipped within 10-21 days

DR 99 735, ready-to-run model
BEMO 1008893 Scale H0e
DR 99 735, ready-to-run model

In 1881, the Royal Saxon State Railway (K.Sä.Sts.B.) opened the first of a total of 30 narrow gauge railways. When building this network, totalling 561 km in length, a gauge of 750 mm was chosen for the majority of the lines. The steep and winding routes soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose mechanism, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had running gear designs that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction arrived – thanks to laterally shifting wheelsets of the Gölsdorf system. Signs of wear forced the DR to modernise and re-boiler some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least due to their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox made of die-cast metal Drive and current pick-up via all driving and coupled axles Couplings included for assembly

Regular price: CHF 836.00

On order, shipped within 10-21 days

DR VT 133 525 Wismar railbus
BEMO 1009935 Scale H0e
DR VT 133 525 Wismar railbus

In the 1930s, the Wismar wagon factory developed a railbus of the "Hannover" type – designed primarily for financially weak light railways with low traffic volumes. A total of 57 railbuses were built for use on standard and narrow-gauge railways with various wheelbases. While running, only the motor positioned at the front in the direction of travel, with an output of 40-50 hp, could be used; the other was switched off.

Regular price: CHF 199.95

On order, shipped within 10-21 days

K.Sä.Sts.B. No. 6 black, sä. I K, ready-built model
BEMO 1013816 Scale H0e
K.Sä.Sts.B. No. 6 black, sä. I K, ready-built model

H0e new tooling: sä. I K The fifth sä. I K locomotive with a rounded cab was delivered on 6 July 1883. Unlike the previous locomotives, this machine had no casing over its running gear. More striking, however, was its greater length over the buffers, which also made the cab almost 30 cm longer. From No. 6 onwards, the I K locomotives also carried different amounts of water and coal on each side. It was withdrawn from service in 1923. Model features Small-series hand-built model in white metal and brass Bell-armature motor with flywheel Drive and current pick-up through all driving and coupled axles Couplings included for fitting

Regular price: CHF 731.50

Pre-order, release expected in Q4 2026

DR 99 577 sä. IV K ready-built model
BEMO 1016837 Scale H0e
DR 99 577 sä. IV K ready-built model

In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow-gauge railways. For the construction of the network, which totalled 561 km, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had drive mechanisms that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction appeared, fitted with laterally displaceable wheelsets of the Gölsdorf system. Wear phenomena that occurred forced the DR to modernise and fit new boilers to some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 817.00

On order, shipped within 10-21 days

DR 99 570 Rügen sä. IV K ready-built model
BEMO 1016851 Scale H0e
DR 99 570 Rügen sä. IV K ready-built model

In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow-gauge railways. For the construction of the network, which totalled 561 km, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had drive mechanisms that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction appeared, fitted with laterally displaceable wheelsets of the Gölsdorf system. Wear phenomena that occurred forced the DR to modernise and fit new boilers to some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 826.50

On order, shipped within 10-21 days

DR 99 534 sä. IV K ready-built model
BEMO 1016863 Scale H0e
DR 99 534 sä. IV K ready-built model

In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow-gauge railways. For the construction of the network, which totalled 561 km, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had drive mechanisms that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction appeared, fitted with laterally displaceable wheelsets of the Gölsdorf system. Wear phenomena that occurred forced the DR to modernise and fit new boilers to some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 817.00

On order, shipped within 10-21 days

K.Sä.Sts.B. 132 green museum locomotive
BEMO 1016892 Scale H0e
K.Sä.Sts.B. 132 green museum locomotive

In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow-gauge railways. For the construction of the network, which totalled 561 km, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles, all had drive mechanisms that were costly to maintain. It was not until the VI K, procured in 1918 for the former military field railways, that powerful 750 mm locomotives of simple construction appeared, fitted with laterally displaceable wheelsets of the Gölsdorf system. Wear phenomena that occurred forced the DR to modernise and fit new boilers to some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Small-series hand-built model in white metal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 845.50

On order, shipped within 10-21 days

DR 99 1789-9, ready-built model
BEMO 1017809 Scale H0e
DR 99 1789-9, ready-built model

In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow gauge lines. For the construction of this 561 km network, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles all had maintenance-intensive running gear designs. It was only with the VI K, procured in 1918 for the former Heeresfeldbahnen (military field railways), that powerful and – thanks to laterally displaceable wheelsets of the Gölsdorf system – simply constructed 750 mm machines arrived. Wear phenomena forced the DR to modernise and re-boiler some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Hand-built limited-series model in whitemetal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting

Regular price: CHF 817.00

On order, shipped within 10-21 days