Rolling Stock
In 1881, the Königlich Sächsische Staatsbahn (K.Sä.Sts.B.) opened the first of a total of 30 narrow gauge lines. For the construction of this 561 km network, a gauge of 750 mm was chosen for the most part. The lines, rich in gradients and curves, soon became a challenge for many locomotive builders: the double locomotive II K imported from England, the III K with the Klose valve gear, the articulated locomotive IV K of the Meyer type, or the V K with Klien-Lindner hollow axles all had maintenance-intensive running gear designs. It was only with the VI K, procured in 1918 for the former Heeresfeldbahnen (military field railways), that powerful and – thanks to laterally displaceable wheelsets of the Gölsdorf system – simply constructed 750 mm machines arrived. Wear phenomena forced the DR to modernise and re-boiler some locomotives from 1963 onwards. Nevertheless, the VI K disappeared from service in 1975, not least because of their high axle loads. Model version Hand-built limited-series model in whitemetal and brass construction Bell-armature motor with flywheel Gearbox in plastic technology Drive and current pick-up via all driving and coupled axles Couplings included for fitting
On order, shipped within 10-21 days
Built in large numbers between 1967 and 1985 by the vehicle and machine manufacturer FAUR in Bucharest (Romania), the diesel-hydraulic bogie locomotive L45H ran on many Eastern European railways and was also used by industrial and works railways. Today, some examples of these 450 hp, 10.25 m long narrow gauge locomotives for 750-1000 mm gauge are still in service in their original areas of operation in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have in the meantime also become popular railway service locomotives, reaching Germany in Saxony at the SDG, Austria on the Ybbstalbahn mountain section of the ÖGLB, or even, among other places, the Mediterranean island of Corsica, where they were partly re-engined for track work. After their service there ended, the machines used there found further new areas of operation, for example as track-building locomotives in Italy/France or at the Baie de Somme heritage railway. Model version Die-cast chassis Drive and current pick-up via all four axles Prepared for sound LED headlights that change over with the direction of travel Separately applied handrails Separately applied wind deflectors Separately applied windscreen wipers Etched steps and fan cover Can be converted to H0m gauge (replacement wheelsets available as an option)
On order, shipped within 10-21 days
Built in large numbers between 1967 and 1985 by the vehicle and machine manufacturer FAUR in Bucharest (Romania), the diesel-hydraulic bogie locomotive L45H ran on many Eastern European railways and was also used by industrial and works railways. Today, some examples of these 450 hp, 10.25 m long narrow gauge locomotives for 750-1000 mm gauge are still in service in their original areas of operation in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have in the meantime also become popular railway service locomotives, reaching Germany in Saxony at the SDG, Austria on the Ybbstalbahn mountain section of the ÖGLB, or even, among other places, the Mediterranean island of Corsica, where they were partly re-engined for track work. After their service there ended, the machines used there found further new areas of operation, for example as track-building locomotives in Italy/France or at the Baie de Somme heritage railway. Model version Die-cast chassis Drive and current pick-up via all four axles Prepared for sound LED headlights that change over with the direction of travel Separately applied handrails Separately applied wind deflectors Separately applied windscreen wipers Etched steps and fan cover Can be converted to H0m gauge (replacement wheelsets available as an option)
On order, shipped within 10-21 days
The Wassertalbahn was completed in 1932 as an industrial railway for hauling timber to a sawmill in Viseu de Sus, in the border region between Romania and Ukraine. Operation on this 760 mm narrow-gauge forest railway in the Carpathians is shared between diesel-hauled production trains and tourist trains mostly headed by steam locomotives. Among other locomotives, the railway uses four bogie diesel locomotives of the L45H type built by the Faur company, in yellow, red, blue and green. After the production of the yellow 87 0036-1 and the opal green 87-0033-8, the next model is the blue locomotive 87-0032-0. A few years ago, the four L45H locomotives received a black livery matching that of the steam locomotives. As a splash of colour, the decorative stripe running around the body was kept in the locomotive's previous body colour, namely yellow, red, blue or green. Model features Die-cast metal chassis Drive and current pick-up through all four axles Sound-prepared LED headlight that changes over with the direction of travel Fitted handrails Fitted wind deflectors Fitted windscreen wipers Etched steps and fan cover Can be regauged to H0m (replacement wheelsets available separately)
On order, shipped within 10-21 days
The diesel-hydraulic bogie locomotive L45H, built in large numbers between 1967 and 1985 by the vehicle and machine manufacturer FAUR in Bucharest (Romania), ran on many Eastern European railways and was also used by industrial and works railways. Today, some examples of these 450 hp, 10.25 m long narrow-gauge locomotives for a gauge of 750-1000 mm are still in service on their original lines in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have meanwhile become popular service locomotives in Germany or Austria. In 2004, the Chemins de Fer de la Corse acquired nine Romanian L45H diesel locomotives through the Metricrail consortium for track renewal on the Mediterranean island. These machines, numbered 60001-60009, were converted to metre gauge and, after initial problems, eventually fitted with Caterpillar engines. Further modifications allowed multiple-unit operation; externally, other differing details can be found, such as the characteristic double lamps. Due to the delay, an intermediary supplied three refurbished locomotives, 45001-45003, so that a total of 12 locomotives could be used in engineering train service on the island. After the end of their deployment there, the machines used there found further new fields of application, for example as track construction locomotives in Italy/France or at the Baie de Somme heritage railway. This locomotive model is also available in H0m under item number 1220 926! Model version Die-cast chassis Drive and current pick-up on all four axles Sound-prepared LED headlights, changing with the direction of travel Separately applied handrails Separately applied wind deflectors Separately applied windscreen wipers Etched steps and fan cover Can be converted to H0e gauge (replacement wheelsets optionally available)
On order, shipped within 10-21 days
The bogie diesel-hydraulic locomotive L45H, built in large numbers by the vehicle and machine manufacturer FAUR in Bucharest (Romania) between 1967 and 1985, ran on many Eastern European railways and was also used on industrial and works railways. Today some examples of these 450 hp, 10.25 m long narrow-gauge locomotives for 750-1000 mm gauge are still in service in their original operating areas in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have since become popular service locomotives in Germany, in Saxony with the SDG, but also even on the Mediterranean island of Corsica, where they were partly re-engined for track work. After their service there ended, the machines employed there moved on to further new areas of operation, for example as track construction locomotives in Italy/France or at the Baie de Somme heritage railway. Two of these locomotives are preserved operational in Austria today: one on the mountain section of the Ybbstalbahn run by the ÖGLB; in western Styria, the municipality of Stainz took over the closed Preding-Wieselsdorf – Stainz line from the Steiermärkische Landesbahnen and operates it as the "Stainzer Flascherlzug" heritage railway. Trains hauled by both steam and diesel locomotives are used. In 2023 the previously purple Faur diesel locomotive L45H-070 received an attractive new red livery. Model features Die-cast metal chassis Drive and current pick-up through all four axles Sound-prepared LED headlight that changes over with the direction of travel Fitted handrails Fitted wind deflectors Fitted windscreen wipers Etched steps and fan cover Can be regauged to H0m (replacement wheelsets available separately)
On order, shipped within 10-21 days
New tooling for 2026: diesel locomotive of the Steiermärkische Landesbahnen In 1968, the company Duro Dakovic delivered to the Yugoslav state railway JZ the first prototype, 740-001, of a newly developed bogie diesel locomotive for testing on the Bosnian Eastern Railway. The aim was to rationalise freight traffic and replace steam operation on the narrow-gauge network with 760 mm gauge, which in the 1960s still covered around 3000 km. By 1972, a total of 40 units had been delivered with locomotives 740-001 to 025 without heating equipment and 740-101 to 115 with a heating boiler; as in many other countries, however, they could no longer halt the decline of the narrow-gauge railways, so that some of them found new tasks with industrial companies, track-laying firms or in other countries. After the closure of the Thörlerbahn, the VL 23 also came to the Feistritztalbahn. From 1999 to 2003, the orange locomotive was loaned to the Zillertalbahn for timber transport using transporter wagons. In 2015, it left the Feistritztal for the Murtal. Ahead of the resumption of timber traffic on the Zillertalbahn, it was given a livery in the new white/dark blue colours of the Steiermarkbahn StB at Murau, as well as LED headlights. Since April 2021, it has been the regular locomotive for the timber trains on behalf of Binderholz in Fügen. Model version prior to the repainting in white/dark blue, as also used as a loan locomotive in the Zillertal. A locomotive model in its current appearance will be released at a later date. You will find matching Zillertalbahn transporter wagons in the ROCO range. Model version Die-cast chassis Drive and current pick-up via all four axles Sound-prepared White/red LED headlights, changing with the direction of travel Digital model with cab lighting Prototype-accurate, differing bodies, buffer beams, access steps and add-on parts Separately applied handrails With bow coupling and Bosna coupling
Pre-order, release expected in Q4 2026
New tooling for 2026: diesel locomotive of the Steiermärkische Landesbahnen In 1968, the company Duro Dakovic delivered to the Yugoslav State Railways (JZ) the first prototype 740-001 of a newly developed bogie diesel locomotive, for trials on the Bosnian Eastern Railway. The aim was to rationalise freight traffic and to replace steam operation on the narrow-gauge network with 760 mm gauge, which still covered around 3000 km in the 1960s. By 1972, a total of 40 units had been delivered with locomotives 740-001 to 025 without heating equipment and 740-101 to 115 with a heating boiler; as in many other countries, however, they could no longer halt the decline of the narrow-gauge railways, so that some of them found new tasks with industrial companies, track construction firms or in other countries. In 1980, the Steiermärkische Landesbahnen (StLB) took over the two locomotives 740-023 and 024 for freight traffic on the Thörlerbahn and the Feistritztalbahn. The two VL 22 and 23 received new MTU engines. After the Thörlerbahn closed in 1995, the VL 22 received a more powerful MTU engine and the StLB's new red livery. When the Feistritztalbahn also lost its freight traffic in 2014, it moved to the Murtal. There it hauls the occasional freight and works trains. The model depicts the condition up to around 2023, before a switch and fire extinguisher box was fitted to the short hood. Model version Die-cast chassis Drive and current pick-up via all four axles Sound preparation White/red LED headlights that change with the direction of travel Digital model with cab lighting Prototypically different bodies, buffer beams, access steps and add-on parts Applied handrails With bow coupling and Bosna coupling
Pre-order, release expected in Q4 2026
New tooling 2026: Zillertalbahn diesel locomotive In 1968 the company Duro Dakovic delivered the first prototype 740-001 of a newly developed bogie diesel locomotive to the Yugoslav State Railways (JZ), for testing on the Bosnian Ostbahn. The aim was to rationalise freight traffic and to replace steam operation on the narrow-gauge network with a gauge of 760 mm, which in the 1960s still covered around 3000 km. By 1972, a total of 40 units had been delivered with locomotives 740-001 to 025 without a heating device and 740-101 to 115 with a heating boiler; as in many other countries, however, they could not halt the decline of the narrow-gauge railways, so that some of them found new tasks with industrial companies, track-construction firms or in other countries. Locomotive 740-007 found its way to the Zillertalbahn in 1980 and received the running number D 10 there. It was fitted with a new engine at the Jenbach works, received a new cab and control desks as well as train heating for passenger service. In the mid-1990s the engine was replaced again and a push-pull control system was installed as a reserve set for shuttle train service. In the early 2010s it was taken out of service after an engine failure. Because of the resumption of timber traffic to Fügen, restoration work began in winter 2021 and an MTU engine was installed. The work has not yet been completed to this day. Model version with beige decorative stripe, as after the installation of the push-pull control system. You will find matching Zillertalbahn transporter wagons in the ROCO range. Model version Die-cast metal chassis Drive and current pick-up on all four axles Sound-prepared White/red LED headlights, changing with the direction of travel Digital model with cab lighting Prototypically different bodies, buffer beams, access steps and add-on parts Separately applied handrails and mirrors With bow coupling and Bosna coupling
Pre-order, release expected in Q4 2026
Exclusive model 2026 The prototype locomotive, now operational with the Preßnitztalbahn, has travelled on many railways during its eventful history: after being withdrawn from the DR, it went to Norway from 1977 to 1984, then until around 1994 to the Öchsle in Baden-Württemberg; it finally passed into private ownership, based in Straupitz and later Putbus. After an overhaul in Romania in 2006, it remained on the island of Rügen and was taken over by the Preßnitztalbahn in 2014. Hand-built Metal Collection model in a highly detailed version with locomotive details true to the prototype. Please note the order deadline of 1.5.2026. Model details of the 99 1594-3 of the Aue depot, Era IV version: Raised water tank filler neck With Reko-type roof and four open hatches Reproduction of the connected heating hoses for train heating Valve gear cast in nickel silver and new valve gear support Lettering with prototype-correct etched plates and pad printing ESU Loksound 5 nano decoder (Henning sound) Warm white LED headlights that change with the direction of travel Switchable firebox flickering Switchable LED cab lighting
- Sound
Pre-order, release expected in Q4 2026
Exclusive model 2026 The prototype locomotive, now operational with the Preßnitztalbahn, has travelled to many railways during its eventful history: after being withdrawn from the DR, it went to Norway from 1977 to 1984, then to the Öchsle in Baden-Württemberg until around 1994; it was eventually sold into private ownership, based at Straupitz and later Putbus. After an overhaul in Romania in 2006, it remained on the island of Rügen and was taken over by the Preßnitztalbahn in 2014. Metal Collection hand-built model in a highly detailed finish, with locomotive details true to the prototype. Please note the order deadline of 1.5.2026. Model details of the 99 594 from the Kirchberg depot, Era III version: tall water tank filler cab of the older-build locomotive with older-build roof ventilators and two open hatches Heberlein equipment valve gear cast in nickel silver and new valve gear support prototypical lettering with etched plates ESU Loksound 5 nano decoder (Henning Sound) direction-dependent warm white LED headlights switchable firebox flickering switchable LED cab lighting
- Sound
Pre-order, release expected in Q4 2026
New tooling for 2026: diesel locomotive of the Steiermärkische Landesbahnen In 1968, the Duro Dakovic company delivered to the Yugoslav State Railways (JZ) the first prototype 740-001 of a newly developed bogie diesel locomotive for trials on the Bosnian Ostbahn. The aim was to rationalise freight traffic and replace steam operation on the narrow-gauge network, which in the 1960s still comprised around 3000 km at a gauge of 760 mm. By 1972, a total of 40 units had been delivered: locomotives 740-001 to 025 without a heating device, and 740-101 to 115 with a heating boiler. As in many other countries, however, they were unable to halt the decline of the narrow-gauge railways, so some of them found new tasks with industrial companies, track-laying firms, or in other countries. The VL 23 also came to the Feistritztalbahn after the closure of the Thörlerbahn. From 1999 to 2003, the orange locomotive was loaned to the Zillertalbahn for timber transport using transporter wagons. In 2015, it left the Feistritztal for the Murtal. Ahead of the resumption of timber traffic on the Zillertalbahn, it received a new livery in the new white/dark blue colours of the Steiermarkbahn StB at Murau, as well as LED headlights. Since April 2021, it has been the regular locomotive for the timber trains on behalf of Binderholz in Fügen. Model version before the repainting in white/dark blue, as also used as a loan locomotive in the Zillertal. A model of the locomotive in its current appearance will be released at a later date. Matching transporter wagons of the Zillertalbahn can be found in the ROCO range. Model version Die-cast chassis Drive and current pick-up on all four axles Sound preparation White/red LED headlights that change over with the direction of travel Digital model with cab lighting Prototypically different bodies, buffer beams, access steps and attached parts Separately applied handrails With bow coupling and Bosna coupling
- Sound
Pre-order, release expected in Q4 2026
New tooling for 2026: diesel locomotive of the Steiermärkische Landesbahnen In 1968, the company Duro Dakovic delivered to the Yugoslav state railway JZ the first prototype, 740-001, of a newly developed bogie diesel locomotive, for trials on the Bosnian Eastern Railway. The aim was to rationalise freight traffic and to replace steam operation on the narrow-gauge network of 760 mm gauge, which in the 1960s still covered around 3,000 km. By 1972, a total of 40 units had been delivered, comprising locomotives 740-001–025 without heating equipment and 740-101–115 with a heating boiler; as in many other countries, however, they could no longer halt the decline of the narrow-gauge railways, so that some of them found new tasks with industrial companies, track-laying firms or in other countries. The Steiermärkische Landesbahnen (StLB) took over the two locomotives 740-023 and 024 in 1980 for freight traffic on the Thörlerbahn and the Feistritztalbahn. The two locomotives VL 22 and 23 received new MTU engines. After the Thörlerbahn closed in 1995, the VL 22 received a more powerful MTU engine and the new red livery of the StLB. When the Feistritztalbahn also lost its freight traffic in 2014, it moved to the Murtal. There it hauls the occasional freight and works trains. The model is modelled as it looked until around 2023, before a switch cabinet and a fire-extinguisher box were fitted to the short hood. Model version Die-cast chassis Drive and current pick-up on all four axles Sound-ready White/red LED headlight that changes with the direction of travel Digital model with cab lighting Prototypically different bodies, buffer beams, steps and fittings Separately applied handrails With bow coupling and Bosna coupling
- Sound
Pre-order, release expected in Q4 2026
New tooling for 2026: Zillertalbahn diesel locomotive In 1968, the Duro Dakovic company delivered the first prototype 740-001 of a newly developed bogie diesel locomotive to the Yugoslav state railway JZ, for testing on the Bosnian Eastern Railway. The aim was to rationalise freight traffic and replace steam operation on the roughly 3,000 km narrow-gauge network with a gauge of 760 mm that still existed in the 1960s. By 1972, a total of 40 units had been delivered, comprising locomotives 740-001 to 025 without heating equipment and 740-101 to 115 with a heating boiler; as in many other countries, however, they could not halt the decline of the narrow-gauge railways, so some of them found new tasks with industrial companies, track-laying firms, or in other countries. Locomotive 740-007 found its way to the Zillertalbahn in 1980 and was given the running number D 10 there. It was fitted with a new engine at the Jenbach works, received a new cab and control desks, as well as train heating for passenger service. In the mid-1990s, the engine was replaced again, and a push-pull control system was installed as a reserve set for shuttle service. In the early 2010s, it was taken out of service following an engine failure. Due to the resumption of timber traffic to Fügen, overhaul work began in the winter of 2021, fitting an MTU engine. The work has still not been completed to this day. Model version with a beige-coloured decorative stripe, as fitted after installation of the push-pull control system. You will find matching Zillertalbahn transporter wagons in the ROCO range. Model version Die-cast chassis Drive and current pick-up on all four axles Sound-prepared White/red LED headlights, changing over with the direction of travel Digital model with cab lighting Prototypically different bodies, buffer beams, access steps and attached parts Attached handrails With bow coupling and Bosna coupling
- Sound
Pre-order, release expected in Q4 2026
The diesel-hydraulic bogie locomotive L45H, built in large numbers between 1967 and 1985 by the vehicle and machinery manufacturer FAUR in Bucharest (Romania), ran on many Eastern European railways and was also used on industrial and works railways. Today, some examples of these 450 hp, 10.25 m long narrow-gauge locomotives for a gauge of 750 to 1000 mm are still in service in their traditional areas of operation in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have in the meantime also found their way to Germany or Austria as popular departmental locomotives. In 2004, the Chemins de Fer de la Corse acquired nine Romanian L45H diesel locomotives through the Metricrail consortium for track renewal on the Mediterranean island. The machines, designated 60001 to 60009, were converted to metre gauge and, after initial problems, eventually fitted with Caterpillar engines. Further adaptations included a multiple-unit traction capability; externally, other distinguishing details can be found, such as the characteristic double headlamps. Due to the delay, an intermediary supplied three overhauled locomotives, 45001 to 45003, so that a total of 12 locomotives could be used for engineer's train service on the island. After the end of their service there, the machines used there found further new areas of operation, for example as track-construction locomotives in Italy/France or at the Baie de Somme heritage railway. The locomotive model is available in H0e under item number 1020 926! Model version Die-cast chassis Drive and current pick-up on all four axles Sound-prepared LED headlights, changing over with the direction of travel Attached handrails Attached wind deflectors Attached windscreen wipers Etched steps and fan cover Can be converted to H0e (replacement wheelsets available as an option)
On order, shipped within 10-21 days
The diesel-hydraulic bogie locomotive L45H, built in large numbers between 1967 and 1985 by the vehicle and machinery manufacturer FAUR in Bucharest (Romania), ran on many Eastern European railways and was also used on industrial and works railways. Today, some examples of these 450 hp, 10.25 m long narrow-gauge locomotives for a gauge of 750 to 1000 mm are still in service in their traditional areas of operation in Romania (class 87), Poland (Lxd2), Slovakia, Serbia and Hungary (Mk45). Some have in the meantime also found their way to Germany or Austria as popular departmental locomotives. In 2004, the Chemins de Fer de la Corse acquired nine Romanian L45H diesel locomotives through the Metricrail consortium for track renewal on the Mediterranean island. The machines, designated 60001 to 60009, were converted to metre gauge and, after initial problems, eventually fitted with Caterpillar engines. Further adaptations included a multiple-unit traction capability; externally, other distinguishing details can be found, such as the characteristic double headlamps. Due to the delay, an intermediary supplied three overhauled locomotives, 45001 to 45003, so that a total of 12 locomotives could be used for engineer's train service on the island. After the end of their service there, the machines used there found further new areas of operation, for example as track-construction locomotives in Italy/France or at the Baie de Somme heritage railway. The locomotive model is available in H0e under item number 1020 929! Model version Die-cast chassis Drive and current pick-up on all four axles Sound-prepared LED headlights, changing over with the direction of travel Attached handrails Attached wind deflectors Attached windscreen wipers Etched steps and fan cover Can be converted to H0e (replacement wheelsets available as an option)
On order, shipped within 10-21 days
Baggage railcar of the Furka Oberalp Bahn After the first edition of the FO railcar novelty sold out quickly despite generous reserves, with the second edition we are realising the three still-missing running numbers. On the one hand, railcar 41 in the blue/beige livery of the Schöllenenbahn, as well as the BDeh 2/4 45 in dark red livery and the BDeh 2/4 42 with a white stripe. To match, we are also releasing two driving trailer models in dark red and red livery with a white stripe. Model details The railcar model features two differently designed bogies, positioned very far to the outside, both of which are driven in the model, for reasons of tractive effort, by the 5-pole motor with flywheel. Abt rack gear wheels can be fitted in both bogies for rack operation. The drive bogie is refined with separately applied parts; the inner sand boxes cannot be fitted on tight curves due to a collision with the baggage compartment access steps – but are also partly hidden by them. The carrying bogie has, true to the prototype, an asymmetrical pivot point. In the die-cast chassis frame, various components were fitted on the underside for the greatest possible level of detail on the underframe, while maintaining a high adhesive weight. There is a mount in the baggage compartment for the optional installation of a loudspeaker. The white headlights and standard-fitted interior lighting are provided by LEDs; digital interface according to NEM 662/Next18, as with all H0m new developments. The body is fastened to the chassis with four screws, with the roof hoods made externally as perforated plastic parts.
On order, shipped within 10-21 days
Following positive operating experience with the first bogie locomotives with individual axle drive at BLS, the RhB adopted this new drive concept when modernising its vehicle fleet. Between 1947 and 1953, SLM delivered ten Ge 4/4 I 601-610 locomotives rated at 1560 hp with a top speed of 75 km/h, in two series which differed by front-end sockets (601-604). From the late 1980s, the ten machines were fundamentally modernised at the Landquart main workshop, receiving among other things a new cab, push-pull train control and the red livery. Subsequently, the scissors-type pantographs were replaced by single-arm pantographs. After the recent withdrawal of two locomotives, two are still in active service as reserve locomotives. Model details New tooling for the die-cast drive and gearbox Replica of the engine room fittings Spring packs fitted to the drive 3+1 white LED headlights LED cab lighting (can be controlled digitally) Sound preparation Drive and current pick-up from all four axles Brake hoses, heating couplings and handrails included for self-assembly
On order, lead time to be confirmed
As early as 1890, the first steam trains ran from the Rhône valley through topographically difficult mountain terrain to Stalden; a year later Zermatt, at the foot of the Matterhorn, was reached. The line towards the Matterhorn was built for mixed adhesion and rack operation. Over six rack sections with a maximum gradient of 125‰, the VZ (later BVZ Zermatt-Bahn, today MGB Matterhorn Gotthard Bahn) climbs an altitude difference of almost 1000 m over a good 35 km. Rising passenger numbers as well as the high operating costs of steam traction prompted the VZ to switch to electric operation towards the end of the 1930s. In 1929-30, five machines were delivered as the initial electric equipment for mixed adhesion and rack operation, following a tender issued by the VZ. Because of the rack sections, single-frame rod-driven electric locomotives were ruled out, and four-axle bogie vehicles were chosen instead. Because of the characteristic hoods on the locomotive bodies, which housed a luggage compartment, the locomotives HGe 4/4 11-15 were given the nickname "Crocodiles". They reach a maximum speed of 45 km/h on adhesion sections, and 25 km/h in rack operation. With the delivery of several railcar series, the locomotives were initially displaced into freight train duties, but were still frequently needed to haul additional passenger trains. It was only with the acquisition of the five modern high-performance locomotives HGe 4/4 II 1-5 in 1990 that the veterans were pushed into secondary duties. In 1992, locomotive 14 was scrapped; between 2002 and 2005, three further machines were broken up, so that today MGB Historic can only operate the last one built, locomotive 15, with modernised ventilation grilles, for special train services. Model details Die-cast chassis Drive and current pick-up from all four axles Working rack drive, Abt system Headlights in the direction of travel Brake hoses, heating couplings and handrails are included for self-assembly Can be converted to H0e, which means rack operation is then no longer possible!
On order, lead time to be confirmed
We are modernising the technology of the Rhaetian Crocodile and equipping it with LED lighting and a Next18 digital interface. For the first time, the digital version is also available with sound and additionally offers lighting in the cab. The replacement of a total of 57 steam locomotives was begun in 1912/13 by the single-frame locomotives Ge 2/4 and Ge 4/6, driven via jackshafts and inclined rods. From 1921 the RhB turned to articulated bogie locomotives: by 1929 SLM/BBC/MFO built a total of 15 of these 1076 hp C'C' locomotives for the newly electrified lines. The legendary RhB "Crocodiles" were able to prove their capability above all on the gradient-rich Albula line. Some locomotives differed in appearance through the installation of additional roof-mounted resistors. The locomotives are not only technical masterpieces but also an important part of the RhB's cultural heritage, which delights railway enthusiasts and tourists alike. Model details Die-cast metal chassis LED cab lighting LED 3+1 headlights that change with the direction of travel Current pick-up on all six axles Drive via both bogies
Pre-order, release expected in Q4 2026
We are modernising the technology of the Rhaetian Crocodile and equipping it with LED lighting and a Next18 digital interface. For the first time, the digital version is also available with sound and additionally offers lighting in the cab. The replacement of a total of 57 steam locomotives was begun in 1912/13 by the single-frame locomotives Ge 2/4 and Ge 4/6, driven via jackshafts and inclined rods. From 1921 the RhB turned to articulated bogie locomotives: by 1929 SLM/BBC/MFO built a total of 15 of these 1076 hp C'C' locomotives for the newly electrified lines. The legendary RhB "Crocodiles" were able to prove their capability above all on the gradient-rich Albula line. Some locomotives differed in appearance through the installation of additional roof-mounted resistors. The locomotives are not only technical masterpieces but also an important part of the RhB's cultural heritage, which delights railway enthusiasts and tourists alike. Model details Die-cast metal chassis LED cab lighting LED 3+1 headlights that change with the direction of travel Current pick-up on all six axles Drive via both bogies
Pre-order, release expected in Q4 2026
Prototype The replacement of the 57 steam locomotives in total began in 1912/1913 with the Ge 4/6, driven via jackshafts and inclined coupling rods. In addition to these twin-motor rod-coupled locomotives rated at 600 hp, later 800 hp, with a top speed of 55 km/h, seven single-motor Ge 2/4 201-207 of around 300 hp were procured in 1913 for light duties and as pilot locomotives. With the commissioning of the "Crocodiles" Ge 6/6 I 401-415, the Ge 2/4 were increasingly used for shunting duties, where the two driver's cabs and the restricted rearward visibility proved disadvantageous. In 1943 and 1946 respectively, three locomotives were therefore converted into shunting locomotives with a central cab: the Ge 2/4 201+206 became the Ge 2/4 213+212, and the Ge 2/4 202 became the Gea 2/4 211, fitted with an additional battery so that it could serve siding tracks not equipped with overhead contact line. In 1967, this locomotive received a diesel engine in place of the battery drive, and was accordingly redesignated Gem 2/4 211. The new shunting locomotives had their large drive motors exchanged for smaller ones rated at 310 hp. In 1946, two further locomotives, 203 and 204, were modernised, leaving only the Ge 2/4 205 and 207, kept as reserve locomotives, in a condition similar to their original delivery state with two scissors-type pantographs. The two modernised locomotives, designated Ge 2/4 221-222, were intended to take on light line duties and pilot assignments; at 610 hp they had an installed output similar to the oldest Ge 4/6, albeit with a lower adhesive weight. They were also fitted with a powerful electric resistance brake, recognisable by the distinctive roof structure in place of the second scissors-type pantograph. With the delivery of modern line vehicles, these two locomotives eventually also found use in shunting. Apart from the Ge 2/4 205 and 207, preserved in non-operational condition, only locomotive 222 escaped the cutting torch – it now belongs to the RhB's heritage vehicle fleet and can mainly be seen during the summer half-year hauling excursion trains. In reissuing the heritage rod-coupled electric locomotive Ge 2/4 222, we are also taking into account locomotive 221, which has not been available as a model for many years. It was scrapped by the RhB in 1998.
On order, shipped within 10-21 days
Prototype The replacement of the 57 steam locomotives in total was initiated in 1912/1913 by the Ge 4/6, driven via jackshafts and inclined connecting rods. In addition to the twin-motor rod locomotives rated at 600, and later 800, hp with a top speed of 55 km/h, seven single-motor Ge 2/4 201-207 of around 300 hp were acquired in 1913 for light duties and as pilot locomotives. With the introduction of the "Crocodiles" Ge 6/6 I 401-415, the Ge 2/4 were increasingly used for shunting duties, where the two cabs and the restricted rearward visibility proved disadvantageous. In 1943 and 1946 respectively, three machines were therefore converted into shunting locomotives with a central cab: the Ge 2/4 201+206 became the Ge 2/4 213+212, and the Ge 2/4 202 became the Gea 2/4 211, fitted with an additional battery so that it could serve connecting tracks not covered by overhead wire. In 1967, this locomotive received a diesel engine in place of the battery drive, giving it the new designation Gem 2/4 211. The new shunting locomotives exchanged their large traction motors for smaller ones with an output of 310 hp. In 1946, two further locomotives, 203 and 204, were modernised, leaving only the Ge 2/4 205 and 207, kept as reserve locomotives, close to their original delivery condition with two scissors-type pantographs. The two modernised locomotives, designated Ge 2/4 221-222, were intended to take on light line duties as well as pilot duties, and with 610 hp installed had a similar power output to the oldest Ge 4/6 - albeit with a lower adhesive weight. They also received a powerful electric resistance brake, recognisable by the distinctive roof superstructure in place of the second scissors-type pantograph. With the delivery of modern line vehicles, these two machines eventually also found use in shunting. Apart from the Ge 2/4 205 and 207, preserved in non-operational condition, only locomotive 222 escaped the cutting torch - it today belongs to the RhB's heritage fleet, and can be seen above all during the summer half-year at the head of excursion trains.
On order, shipped within 10-21 days
26 years after the Ge 4/4 I 601-604 entered service as the RhB's first bogie electric locomotive with an output of 1184 kW, the thyristor-controlled Ge 4/4 II 611-620 set new standards for train haulage on the Graubünden metre-gauge network in 1973. These modern machines, rated at 1700 kW and capable of up to 90 km/h, were intended to replace various classes of the first generation of electric locomotives, which had rod drives and were no longer up to date in terms of power or top speed. They followed two engineering department vehicles previously procured with thyristor technology and six suburban railcars; experience gained by BLS with its standard-gauge Re 4/4 locomotives was also incorporated into the design. The ten machines, built by SLM/BBC and painted green, met the specified requirements and came close to the performance of the heavier six-axle Ge 6/6 II 701-707. Thanks to their multiple-unit control, the heaviest trains could be hauled in double traction on the main network, making these locomotives general-purpose machines for express, regional and freight services. A second series of 13 Ge 4/4 II 621-633 followed in 1984; these were delivered in red livery from the start. Like the other Ge 4/4 I and Ge 6/6 II locomotives, these machines, fitted with single-arm pantographs, were given coats of arms and names. With the conversion of the Arosa line to AC voltage in 1997 and the acquisition of driving trailers, not only did the area of operation expand, but these locomotives also contributed significantly to the economical shuttle operation of individual line sections. The external appearance of the locomotives changed only slightly: modernised pantograph contact strips, additional roof insulators, rectangular headlights, additional rear-view mirrors, and changes to the electrical and pneumatic coupling elements on the front ends are relatively few changes for around 50 years of service. Since 2007, some machines have carried eye-catching advertising lettering. Model details Die-cast running gear and gearbox Replica of the engine room fittings Spring packs mounted on the running gear LED headlight 3+1 white LED cab lighting (can be switched digitally) Sound preparation Model variant: digital version with curve squeal sound Drive and current pick-up via all axles Brake hoses, heating couplings and handrails included for self-assembly
On order, shipped within 10-21 days