Freight Wagons
Prototype: Open goods wagon of the Eaos type for the Swiss Federal Railways (SBB/CFF/FFS). Operating condition: The vehicle looks as it did around 1991.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Four-axle low-sided open wagon of the Res type of On Rail GmbH, Mettmann. European standard design with a length of 19.90 m. Version with steel side boards, folding stakes and square buffers. Golden yellow basic paint scheme. The wagon looks as it did starting in 2007. Model Specific version of the underbody. Many applied details such as folding stakes and handwheels for the parking brake. Y 25 type bogies. Wagon loaded with a ballast reproduction. Length over the buffers 22.9 cm. DC wheelset E700580. Highlights Wagon loaded with a "ballast" load insert Many separately applied details
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: 6-axle articulated double-pocket wagon, type Sdggmrss (T3000e), of Wascosa AG. Modern load-carrying wagon for intermodal freight transport. Basic paint scheme in light red orange. Version with four side folding locks. Operating condition starting in 2019. Loaded with four 20ft tank containers for the haulage company Bertschi.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: Two-axle sliding-roof wagon, type Tms 851. Private wagon of the company Fissler GmbH, Idar-Oberstein, registered with the Deutsche Bundesbahn (DB). Without brake cabin and without brake platform. The vehicle looks as it did around 1990.
In stock: 3 on the shelf, shipped within 1-3 days
Club members only (Märklin Insider)
Prototype Heavy-duty flat wagon of the SSym 46 type of the Deutsche Bundesbahn. Deep black basic paint scheme. The wagon looks as it did starting in the mid-1950s. Model Wagon made of metal. With steel slabs as load. Plug-in stakes are included. Length over the buffers 15.2 cm. DC wheelset E700580. Highlights With attractive load Wagon made of metal
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Six-axle heavy-duty wagon, type Samms 710, of the Deutsche Bahn AG. Basic paint scheme in traffic red. The wagon looks as it did from 2021 on. Model Metal frame. Many separately applied details. Three-axle special bogies. With a separately applied handwheel for the parking brake. Prepared for being driven on by Viessmann CarMotion vehicles. Stakes and folded-up bridging flaps are included as separate plug-in parts. Length over the buffers 18.9 cm. DC wheelset E700580. Highlights Prepared for being driven on by Viessmann Car Motion vehicles Metal frame Many applied details
In stock: 3 on the shelf, shipped within 1-3 days
2 unladen tank transport wagons, type Slmmnps-y, without brake blocks. EXCLUSIVE MODEL SWITZERLAND
In stock: 3 on the shelf, shipped within 1-3 days
Wagon set 1 with two 6-axle articulated double-pocket wagons, series Sdggmrs/T2000. New design! Model exclusively available from ROCO For the first time with prototypical gangway for transhipment, fully functional for system operation Completely redesigned reefer container Elaborate refrigeration unit Wagons made of die-cast metal Fully-equipped model Art. no. 6600323: Changed company numbers The series will continue with further motifs The modern T2000 rail wagons from railCare, equipped with two permanently installed 45-foot refrigerated containers, replace the sliding-wall wagons previously in temporary use by SBB Cargo. They are specially designed for loading and unloading operations on railway ramps and offer a high level of practicality thanks to their sophisticated design. A three-part loading platform compensates for the height difference to the ramp, which enables maximum flexibility when loading and unloading with industrial trucks. With their noticeable Coop lettering, the wagons have become a familiar sight in Swiss freight traffic and can be seen travelling throughout the country almost every day.They can be used in a wide variety of train compositions and lengths thanks to their versatility. Only three wagons are needed to form a prototypical train in the model, which can be used behind SBB Cargo and BLS Cargo locomotives as well as behind the railCare Vectron "Coop". The longest pure T2000 trains are the so-called ‘water trains’ between Wangen bei Olten and Brig. Depending on demand, 12 to 13 carriages are in regular use.
Pre-order
Wagon set 2 with two 6-axle articulated double-pocket wagons, series Sdggmrs/T2000. New design! Model exclusively available from ROCO For the first time with prototypical gangway for transhipment, fully functional for system operation Completely redesigned reefer container Elaborate refrigeration unit Wagons made of die-cast metal Fully-equipped model Art. no. 6600322: Changed company numbers The series will continue with further motifs The modern T2000 rail wagons from railCare, equipped with two permanently installed 45-foot refrigerated containers, replace the sliding-wall wagons previously in temporary use by SBB Cargo. They are specially designed for loading and unloading operations on railway ramps and offer a high level of practicality thanks to their sophisticated design. A three-part loading platform compensates for the height difference to the ramp, which enables maximum flexibility when loading and unloading with industrial trucks. With their noticeable Coop lettering, the wagons have become a familiar sight in Swiss freight traffic and can be seen travelling throughout the country almost every day.They can be used in a wide variety of train compositions and lengths thanks to their versatility. Only three wagons are needed to form a prototypical train in the model, which can be used behind SBB Cargo and BLS Cargo locomotives as well as behind the railCare Vectron "Coop". The longest pure T2000 trains are the so-called ‘water trains’ between Wangen bei Olten and Brig. Depending on demand, 12 to 13 carriages are in regular use.
Pre-order
Prototype Low-floor transport wagon, type Saadkms, of RAlpin AG (Olten), for the transit traffic of the "Rollende Landstraße". Quartz grey basic paint scheme. The wagon looks as it did starting in 2018. Model Wagon body of metal. Intermediate wagon without buffer beams. Chocks for lorry models and a special coupler for low-floor wagons are included. Length 21.4 cm. AC wheelset E363630. Highlights Wagon body of metal Intermediate wagon to extend the train consist
In stock: 3 on the shelf, shipped within 1-3 days
Pair of transporter bogies in kit form for H0m, black finish. Cannot be converted to H0e.
In stock: 2 on the shelf, shipped within 1-3 days
The company Furrer+Frey, active in overhead line construction on many Swiss metre-gauge railways, uses, among others, on the connected network of the RhB and MGB, the covered van P 10126 of the FO Gbv 4433-4444 series, taken over from the MGB. The model is produced as a one-time 2020 annual wagon. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5363 200 Standard coupling (10 pcs) 5400 222 Close coupling adapter (10 pcs) 4650 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
The Rhätische Bahn (RhB) placed into service in 1999 and 2002 respectively four-axle bogie container flat wagons Sbk-v 7701-7715 (26 t load capacity) and Sb-v 7716-7730 (reinforced, with 30 t load capacity). Due to the low-floor section, only one container can be carried, but this also applies under the restricted clearance gauge of the Bernina line. Thanks to the bogie design, the maximum speed of 80 km/h for the two-axle Lb-v could now be raised to 100 km/h. They can therefore be included not only in goods trains but also at the rear of express trains – for example on the Albula line. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 4689 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of the Austrian Federal Railways (Rail Cargo Wagon). New design 2025! Wagon made from die-cast metal Carries tank containers from the company TWS Tankcontainer-Leasing Four movable snap locks per trough The "T3000e" Megatrailer pocket wagon is a further development of the "T2000" class. Its loading space is designed to accommodate the low-lying vehicle parts of the Megatrailer. Additionally, it can also load trailers from previous designs, swap bodies and containers up to a length of 7.82 m.
In stock: 2 on the shelf, shipped within 1-3 days
High capacity sliding wall wagon type Habbiins of the Deutsche Bahn. Finely-detailed design With separately attached handle rails
In stock: 2 on the shelf, shipped within 1-3 days
Pressurised gas tank wagon, type Zags, operated by the Deutsche Bundesbahn. Version without sunroof
In stock: 2 on the shelf, shipped within 1-3 days
With the Sggnss’80 container flat wagon, it is now possible for the first time to transport containers with a total length of 80 feet on a four-axle bogie wagon. The wagon is 25940 mm long and is manufactured by Tatravagonka and Greenbrier Europe. The wagons are mostly used in block trains; currently, the Sggnss’80 are in use with Metrans, VTG, Boxxpress, RailCargoAustria, SETG, GATX and StlB. Perfect train locomotives are our models of the Siemens Vectron and the Vossloh diesel locomotives G1000, G1700 and DE18. Model features New tooling First time for Gauge N Metal chassis Close coupling with NEM pocket Magnetic container The minimum radius for operation is 228 mm
In stock: 2 on the shelf, shipped within 1-3 days
The K2 and K3 wagons are undoubtedly among the standard goods wagons of Switzerland. Both were built for many years (the K2 since 1900, the K3 since 1913), and they were available – with identical main dimensions – in various versions with different wheelbases. The SBB kept these partially obsolete classes in service for a long time, so that the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, offering a choice of various buffer, door and wheelset variants that enable a diversity of versions across the eras. Wagons for wine transport and Maggi advertising. K3 with bar buffers, solid wheels and steel door. K2 with bar buffers, solid wheels and steel door. Model features Consideration of all epochal differences many separately applied details Close coupling with NEM coupling pocket Extensive and detailed printing Partially spoked wheels
In stock: 2 on the shelf, shipped within 1-3 days
RhB stanchion wagon R-w no. 8385. Model by Kato in N gauge.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Gs 210 of the German Federal Railway (DB). Model Relex couplers. Length over the buffers 11.5 cm. DC wheelset E700580 available separately.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Stake car in a colorful design. Model Car with magnetic couplers. Loads for the car are offered as a separate load set under item number 72250. Length of the car 11.2 cm. Note Stake car to go with the freight train starter set 29210. Additional cars are available under item numbers 44100, 44101, 44102 and 44103.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Gs-uv 213 of the German Federal Railway (DB). Model The all-rounder with the tail lamp for your goods train. Highlights With the lit tail lamp this is the ideal rear vehicle on any goods train
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Auto transport car loaded with 2 sturdy automobile models. Model Car with magnetic couplers. The car has a folding ramp at one end. The removable, child-friendly automobile models are made mostly of metal. Total length of the car 18.5 cm. Highlights Includes two model cars Folding ramp 3-part set approx. 19 cm long
In stock: 2 on the shelf, shipped within 1-3 days
Prototype A tipper wagon in a colourful design. Model The tipper wagon body can be tilted to both sides. Magnetic couplings. Sheet of stickers with motifs from the various Märklin my world theme worlds. Car length 11.2 cm. Note The dump car is the ideal addition to starter sets 29340, 29342, 29344 and 29346.
In stock: 2 on the shelf, shipped within 1-3 days