Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight Wagons

Filter products
D-WASCO, 4-axle round-sided hopper wagon, orange livery with big "WASCOSA" logo
Arnold HN6738 Scale N
D-WASCO, 4-axle round-sided hopper wagon, orange livery with big "WASCOSA" logo

D-WASCO, 4-axle round-sided hopper wagon, orange livery with big "WASCOSA" logo. N scale (1:160). Minimum radius 192 mm. Close coupler mechanism.

Selling price: CHF 40.75 RRP CHF 42.90

In stock: 1 on the shelf, shipped within 1-3 days

RhB Lb-v 7860 container car Coop "mushrooms"
BEMO 2269110 Scale H0m
RhB Lb-v 7860 container car Coop "mushrooms"

Owing to the progressively increasing number of special wagons being put into service, the demand for two-axle covered goods wagons decreased. As early as 1995 – and to a greater extent from 1997 – various flat wagons for interchangeable containers were converted from the Gb 5001-5100 series. The special wagons designated Lb-v 7851-7886 can be found all over the RhB network, running from Landquart or Chur: with skips, conventional containers, mail containers or refrigerated containers for transporting foodstuffs, for example for Coop or Migros. Bogie wagons now dominate, as they can also be included in passenger trains, which run faster than goods trains; around half of the flat wagons now designated Lb have already been withdrawn from service. The Coop food chain supplies its branches in the Engadin from Chur every working day using colourfully designed refrigerated containers. Several generations of containers have been used since their introduction around the turn of the millennium, and these have been continuously improved. They carry various fruit or vegetable motifs and immediately catch the eye in goods trains, especially when several of them run in the same train. Spare parts 5001 000 Wheelsets H0e (10 pcs) 5201 000 Wheelsets H0m (10 pcs) 5363 200 Standard coupling (10 pcs) 5400 222 Close coupling adapter (10 pcs) 4669 000 1 Detail parts

Regular price: CHF 69.75

In stock: 1 on the shelf, shipped within 1-3 days

RhB Lb 7881 container car Coop "tomato"
BEMO 2269120 Scale H0m
RhB Lb 7881 container car Coop "tomato"

Owing to the progressively increasing number of special wagons being put into service, the demand for two-axle covered goods wagons decreased. As early as 1995 – and to a greater extent from 1997 – various flat wagons for interchangeable containers were converted from the Gb 5001-5100 series. The special wagons designated Lb-v 7851-7886 can be found all over the RhB network, running from Landquart or Chur: with skips, conventional containers, mail containers or refrigerated containers for transporting foodstuffs, for example for Coop or Migros. Bogie wagons now dominate, as they can also be included in passenger trains, which run faster than goods trains; around half of the flat wagons now designated Lb have already been withdrawn from service. Spare parts 5001 000 Wheelsets H0e (10 pcs) 5201 000 Wheelsets H0m (10 pcs) 5363 200 Standard coupling (10 pcs) 5400 222 Close coupling adapter (10 pcs) 4669 000 1 Detail parts

Regular price: CHF 69.75

In stock: 1 on the shelf, shipped within 1-3 days

RhB Haik-v 5130 "Märklin" - wagon of the year 2025
BEMO 2288108 Scale H0m
RhB Haik-v 5130 "Märklin" - wagon of the year 2025

In spring 2025, the Märklin company decorated a sliding-wall wagon of the Haik-v 5121-5135 series with posters depicting its various scales H0, 1 and Z, as well as, on the other side of the wagon, its brands LGB, Trix and Minitrix. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 190 Standard coupling AKA (10 pcs) 5400 190 Close coupling adapter (10 pcs) 5300 210 Standard coupling AOA (10 pcs) for platform side 5400 210 Close coupling adapter (10 pcs) for platform side 4688 000 1 Detail parts – grey brake shoes, brake hoses, levers on the frame only Coloured handwheels, grips and levers are available on request.

Regular price: CHF 87.00

In stock: 1 on the shelf, shipped within 1-3 days

RhB Sb-v 7727 with container Migros WB004
BEMO 2289114 Scale H0m
RhB Sb-v 7727 with container Migros WB004

In 1999 and 2002 respectively, the Rhätische Bahn put into service four-axle bogie container flat wagons Sbk-v 7701-7715 (26 t load capacity) and Sb-v 7716-7730 (reinforced, with 30 t load capacity). Due to the low-floor section, only one container can be carried, but this is also possible within the restricted clearance gauge of the Bernina line. Thanks to the bogie design, the maximum speed, which was 80 km/h for the two-axle Lb-v, has now been raised to 100 km/h. They can therefore be included not only in goods trains but also at the rear of express trains – for example on the Albula line. With the opening of the Migros supermarket and restaurant at the Porta Samedan on 1 July 2021, the RhB gained a further goods customer from the food industry. For deliveries, Migros Ostschweiz relies on combined transport: after delivery from the operations centre in Gossau (SG) to Landquart by Swiss biogas-powered lorries, the RhB takes over the onward transport of the swap bodies to the Engadine via the Vereina tunnel or the Albula. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 4689 000 1 Detail parts

Regular price: CHF 80.00

In stock: 1 on the shelf, shipped within 1-3 days

RhB Sbk-v 7704 "Gfeller"
BEMO 2289164
RhB Sbk-v 7704 "Gfeller"

The Rhätische Bahn (RhB) placed into service in 1999 and 2002 respectively four-axle bogie container flat wagons Sbk-v 7701-7715 (26 t load capacity) and Sb-v 7716-7730 (reinforced, with 30 t load capacity). Due to the low-floor section, only one container can be carried, but this also applies under the restricted clearance gauge of the Bernina line. Thanks to the bogie design, the maximum speed of 80 km/h for the two-axle Lb-v could now be raised to 100 km/h. They can therefore be included not only in goods trains but also at the rear of express trains – for example on the Albula line. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 4689 000 1 Detail parts

Regular price: CHF 74.00

In stock: 1 on the shelf, shipped within 1-3 days

RhB R-w 8382 with container "Valser"
BEMO 2291172 Scale H0m
RhB R-w 8382 with container "Valser"

In 2020, the long era of the Valserwasser trains through the Rhine Gorge between Ilanz and Untervaz, characterised by sliding-wall vans, finally came to an end. From 2016, "railCare" swap bodies were used on a trial basis as a forerunner of the changeover that followed. Naturally, we offer these attractive green swap containers in our range and adapt the container tooling accordingly. Spare parts 5006 000 Wheelset H0e (10 pcs) 5206 000 Wheelset H0m (10 pcs) 5300 200 Standard coupling AMA (10 pcs) 5400 200 Close coupling adapter (10 pcs) 4691 000 1 Detail parts

Regular price: CHF 93.00

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "AEG" DB
Brawa 49628 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "AEG" DB

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car "Brauerei Aldersbach" DRG
Brawa 49814 Scale H0
H0 Beer Car "Brauerei Aldersbach" DRG

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Schartner Bombe" ÖBB
Brawa 49831 Scale H0
H0 Covered Freight Car G10 "Schartner Bombe" ÖBB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 DB
Brawa 49875 Scale H0
H0 Covered Freight Car G10 DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car "Alpirsbach" DRG
Brawa 49879 Scale H0
H0 Beer Car "Alpirsbach" DRG

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Lw SNCF
Brawa 49888 Scale H0
H0 Covered Freight Car Lw SNCF

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car G10 "Kaiser Bier" ÖBB
Brawa 49891 Scale H0
H0 Beer Car G10 "Kaiser Bier" ÖBB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Stihl" DB
Brawa 49893 Scale H0
H0 Covered Freight Car G10 "Stihl" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "UGILOR" SNCF
Brawa 50053 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "UGILOR" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car SCwf 2-axle "Paul Millet" SNCF
Brawa 50054 Scale H0
H0 Lightweight Tank Car SCwf 2-axle "Paul Millet" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Lightweight Tank Car Uerdingen Z [P] "SIMOTRA" SNCF
Brawa 50055 Scale H0
H0 Lightweight Tank Car Uerdingen Z [P] "SIMOTRA" SNCF

Prototype 30m³ lightweight tank wagon in Uerdinger design – thanks to general technical advances in lightweight construction and welding technology, the management at the National Railway (Reichsbahn) decided to dispense with the actual vehicle frame when designing new tank wagons. Instead, the tensile and impact forces would, as far as possible, be absorbed by the boiler. Through the extensive use of welding technology, the goal was to reduce the raw-material requirements and manufacturing costs while at the same time obtaining more robust vehicles. For this reason, the wagon factory in Uerdingen received an order in 1938 to develop a lightweight tank car with a cargo volume of 30m³. As early as 1939, the three prototypes were handed over to two private goods-wagon rental companies as well as the state’s economic research association (Wirtschaftliche Forschungsgesellschaft (Wifo)) for testing. Following a small intermediate series in 1940, series production of the 30m³ Uerdinger-type lightweight tank wagon began in 1941. The largest customer was the German air force (Luftwaffe) with approx. 2,200 units, followed by the Wifo and many smaller companies, which resulted in a total of around 3,700 cars being built. In the post-war period, the wagons acquired by the Wifo and Luftwaffe were redistributed to other wagon operators in both German states. In the following decades, the wagons were primarily used by larger companies in the mineral oil industry, and also by smaller private companies as well as DB and DR themselves. Some of the wagons also remained abroad, where they were operated by new owners. In 2016 one of these wagons was still in use in internal interfactory traffic at Haltermann in Hamburg. Model Bogie with three-point support Individually mounted axle box cover Individually mounted wheelchocks Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Individually mounted axle brake rod Free standing handle bars

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Glt23 "Goggo Motorroller" DB
Brawa 50462 Scale H0
H0 Covered Freight Car Glt23 "Goggo Motorroller" DB

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car Glr22 "Westfalia" DB
Brawa 50488 Scale H0
H0 Covered Freight Car Glr22 "Westfalia" DB

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

In stock: 1 on the shelf, shipped within 1-3 days

H0 Container Car Ucs908 "akw" DB AG
Brawa 50571 Scale H0
H0 Container Car Ucs908 "akw" DB AG

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

In stock: 1 on the shelf, shipped within 1-3 days

H0 Container Car Ucs908 "Mandt Feldspat" DB
Brawa 50573 Scale H0
H0 Container Car Ucs908 "Mandt Feldspat" DB

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

In stock: 1 on the shelf, shipped within 1-3 days

H0 Container Car Usc909 "Heidelberger Zement" DB AG
Brawa 50579 Scale H0
H0 Container Car Usc909 "Heidelberger Zement" DB AG

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G "Sächsische Union Biere" DR
Brawa 50705 Scale H0
H0 Covered Freight Car G "Sächsische Union Biere" DR

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days