Freight Wagons
In 1965, the DB put into service more than 1400 covered high-capacity freight wagons. These wagons are a further development of the Gbs 254. Important features of the Gbs DB: Accurately reproduced underframe installation and design of the wagon. Underframe entirely made of metal, this guarantees very good running characteristics. All parts are very finely made of metal. As a result, the parts are less vulnerable. Many parts are made of fine etched metal. The Gbs/Hbs wagons were used: Behind steam locomotives, diesel locomotives and electric locomotives. Every freight train on the local lines in era 3 to 6 Every mixed freight train on the main lines in era 3 to 6 Gbs wagons could be found in large numbers in every European country Given the use of these wagons, you cannot miss these wagons on your layout in era 3 to 6.
On order, lead time to be confirmed
In 1961, DB put almost 11000 closed high-capacity goods wagons into service. These wagons were built over a long period and therefore have several roof shapes. This Gbs/Hbs is one of the most frequently built goods wagons on the DB after the Second World War.
On order, lead time to be confirmed
In 1965, the DB put into service more than 1400 covered high-capacity goods wagons. These wagons are a further development of the Gbs 254. Important features of the Gbs DB: Accurately reproduced remounting and design of the underside of the wagon. Underside entirely made of metal, this guarantees very good running characteristics. All parts are very finely made of metal. As a result, the parts are less vulnerable. Many parts are made of fine etched metal. The Gbs/Hbs wagons were used: Behind steam locomotives, diesel locomotives and electric locomotives. Every goods train on the local lines in era 3 to 6 Every mixed goods train on the main lines in era 3 to 6 Gbs wagons could be found in large numbers in every European country Given the use of these wagons, you cannot miss these wagons on your layout in era 3 to 6.
On order, lead time to be confirmed
In 1961 the DB put around 11,000 closed high-capacity goods wagons into service. These wagons were built over a long period and therefore have several roof shapes. This Gbs/Hbs is one of the most frequently built goods wagons at the DB after the Second World War.
On order, lead time to be confirmed
In 1961, the NS put more than 1300 closed high-capacity freight wagons into service. These wagons would form the basis for many types of Gbs from other railways. The NS fitted most of the wagons with high sides. The Gbs/Hbs is one of the most numerous goods wagons built by the NS after the Second World War. The following important features of these wagons can be mentioned: In early June 201 Exact-Train brings out the NS Gbs/Hbs with and without high sides. The high sides are very finely executed. Accurately reproduced brake rigging and execution of the underside of the wagon. The underside is entirely made of metal, guaranteeing very good running characteristics. All parts are very finely made in metal. This makes the parts less vulnerable. Many parts are finely etched. 8 AC wheelsets are also available for these wagons. The NS Gbs/Hbs wagons were used: Behind steam locomotives, diesel locomotives and electric locomotives. For bicycle transport. In every goods train on local lines in Era 3 to 5. In every mixed goods train on the main lines in Era 3 to 4. In large numbers in every European country in the EUROP Pool. Given the use of these wagons, you cannot do without these wagons on your layout in Era 3 to 6.
On order, lead time to be confirmed
The covered goods wagon Gms39 of DB and CHG of NS was put into service in the framework of the Marshall Aid Plan after the Second World War. The basis for this wagon was the CSD Zsr wagon. This wagon was the standard covered goods wagon of the CSD. The wagons were supplied by Tatra from Czechoslovakia. Due to the rigid construction, a smooth running of the wagon was achieved. As a result, the maximum speed was set at 100 km/h. The wagons came to be used throughout Europe. A part of the wagons was used in Europapark. Exact-Train builds these wagons with many details. The most important features of these wagons are: Openable doors. With original Blechdach (Tonnendak) (Eastern European wagons can thus be reproduced exactly). Sprung buffers, High tare weight so that wagons run stably on the track. Very detailed underside. Steel handrails and many etched parts. All fragile parts are made of metal, so that breaking or coming loose of parts is prevented. Very accurate conversion to H0 scale. Wagons will appear in the version of many railway companies. For this wagon, AC and RP25 wheelsets will be available. In the design, all wishes of Märklin drivers have been taken into account.
On order, lead time to be confirmed
The covered goods wagon Gms39 of DB and CHG of NS was put into service in the framework of the Marshall Aid Plan after the Second World War. The basis for this wagon was the CSD Zsr wagon. This wagon was the standard covered goods wagon of the CSD. The wagons were supplied by Tatra from Czechoslovakia. Due to the rigid construction, a smooth running of the wagon was achieved. As a result, the maximum speed was set at 100 km/h. The wagons came to all over Europe. A part of the wagons was used in the Europ-Park. Exact-Train builds these wagons with many details. The main features of these wagons are: Openable doors. With original Blechdach (Tonnendak) (Eastern European wagons can therefore be reproduced exactly). Sprung buffers, High own weight so that wagons run stably on the track. Very detailed underside. Steel handgrips and many etched parts. All fragile parts are made of metal, so that breaking or coming loose of parts is prevented. Very accurate conversion to H0 scale. Wagons will appear in the version of many railway companies. For this wagon, AC and RP25 wheels will be available. In the design, all wishes of Märklin drivers have been taken into account.
On order, lead time to be confirmed
The Pwgs44 Bremen goods brake vans were built in large numbers by the Deutsche Reichsbahn in the years 40. After the Second World War, these wagons appeared throughout Europe. They were used by many railway companies, and also with various modifications to the wagons. Exact-Train reproduces the Pwgs44 Bremen goods brake vans in many variants and with many detail changes. The most important features of these wagons are:
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed