Freight Wagons
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
UIC II standard open goods wagon of exceptional quality! In the 1950s and 1960s, the UIC II open wagons were the standard goods wagons purchased throughout Europe. Many railway companies had large fleets of these wagons. Exact-Train found that there are numerous differences in detail between the wagons of the various railway companies, and in some cases even considerable differences in construction, which until now have never been accurately reproduced in model form. For several years we have been carefully recording these differences and incorporating them into our models. The result is a highly detailed replica in which the characteristic variants of each country are reproduced without compromise. Alongside the Klagenfurt, Duisburg, Linz and Villach wagons (currently in production), this wagon represents an important type for coal transport. Once again, Exact-Train has spared no effort to create a robust and extremely detailed model. Key highlights: Extremely thin walls – realistically reproduced. Slim metal frame on the underside – made by etching, 50 % finer than a plastic frame. This gives a more realistic appearance and greater stability. (See illustration) For the FS version, the characteristic frame has been reproduced accurately for the first time! Correct buffers for each country – including sprung versions, reproduced even more true to life than before. Example illustration: an SNCF buffer. Detailed braking systems for each country – all variants carefully reproduced on the underside. Example illustration: NMBS braking system. Fully detailed wagon interior – including doors, wood grain and fixing nails, subtly reproduced in the wooden floor. (See illustrations) Different wheelsets depending on the version – such as disc wheels, spoked wheels (NMBS) and Leonard wheels (SNCF), accurately reproduced on both sides. (See illustrations) Delicate parts (steps, handrails, etc.) made of metal – for greater stability without loss of detail. Metal underside – gives the wagon a low centre of gravity, greater weight and therefore better running characteristics. Free exchange of the AC wheels at your specialist dealer. Quote from the review of the UIC II wagon in the magazine Modelspoormagazine: We have never before seen a model reproduced so precisely. This project was developed in cooperation with Dekas. With this model, Exact-Train has once again surpassed itself!
On order, lead time to be confirmed
The covered goods wagon Ghs Oppeln was built in large numbers by the Deutsche Reichsbahn from 1936. Due to the small vehicle overhang and rigid construction, a smooth running performance was achieved. As a result, the maximum speed was set at 90 km/h. After the Second World War, these wagons were found throughout Europe. They were operated by many railway companies and also rebuilt with minor changes in various countries. The G-Nordhausen was rebuilt in large numbers by the East German DR as a modified variant after the Second World War. Some of the wagons were used in the Europ-Park. Exact-Train builds the Ghs Oppeln and G Nordhausen in many variants with many detailed changes. The main features of these wagons are: With and without brake platforms Shifted axles for Oppeln with brake platforms and extension of the vehicle on one side for G Nordhausen with brake platforms. With and without brake cabins. Openable doors. With original roof (smooth) and sheet metal roof (barrel roof) (SAAR, DB, OBB and Eastern European wagons can be accurately reproduced as a result). Accurately reproduced axle bearings of DR/DB/OBB/DRG/SNCF design in roller bearing and plain bearing versions DR crew wagon with stove is accurately reproduced DR Nordhausen crew wagon with correct end walls reproduced Vehicle underside reproduced in H0 quality with wood imitation and distinguishing colour shades. Distinction between Oppeln and Nordhausen undercarriage accurately reproduced.
On order, lead time to be confirmed
The covered goods wagon Ghs Oppeln was built in large numbers by the Deutsche Reichsbahn from 1936. Due to the small overhang of the vehicle body and the rigid construction, a smooth running characteristic was achieved. As a result, the maximum speed was set at 90 km/h. After the Second World War, these wagons were found throughout Europe. They were operated by many railway companies and, with minor changes, continued to be built in various countries. The G-Nordhausen was rebuilt in large numbers by the East German DR as a modified variant after the Second World War. Some of the wagons were used in the Europ-Park. Exact-Train builds the Ghs Oppeln and G Nordhausen in many variants with numerous detail changes. The main features of these wagons are: With and without brake van compartments Shifted axles for Oppeln with brake van compartments and extension of the vehicle on one side for G Nordhausen with brake van compartments. With and without brake cabin. Opening doors. With original roof (smooth) and sheet metal roof (barrel roof) (SAAR, DB, OBB and Eastern European wagons can be accurately reproduced as a result). Accurately reproduced axle bearings of DR/DB/OBB/DRG/SNCF design in roller bearing and plain bearing versions DR crew wagon with stove is accurately reproduced DR Nordhausen crew wagon with correct end walls reproduced Underside of the vehicle reproduced in H0 quality with wood imitation and distinguishing colour shades. Distinction between Oppeln and Nordhausen underside accurately reproduced.
On order, lead time to be confirmed
The covered goods wagon Ghs Oppeln was built in large numbers by the Deutsche Reichsbahn from 1936. Due to the small overhang of the vehicle body and the rigid construction, a smooth running characteristic was achieved. As a result, the maximum speed was set at 90 km/h. After the Second World War, these wagons were found throughout Europe. They were operated by many railway companies and also rebuilt with minor changes in various countries. The G-Nordhausen was rebuilt in large numbers by the East German DR as a modified variant after the Second World War. A number of the wagons were used in the Europ-Park. Exact-Train builds the Ghs Oppeln and G Nordhausen in many variants with many detailed changes. The main features of these wagons are: With and without brake van compartments Shifted axles for Oppeln with brake van compartments and extension of the vehicle on one side for G Nordhausen with brake van compartments. With and without brake cabin. Opening doors. With original roof (smooth) and sheet metal roof (barrel roof) (SAAR, DB, OBB and Eastern European wagons can be accurately reproduced as a result). Accurately reproduced axle bearings of DR/DB/OBB/DRG/SNCF design in roller bearing and plain bearing versions DR crew wagon with stove is accurately reproduced DR Nordhausen crew wagon with correct end panels reproduced Underside of the vehicle reproduced in H0 quality with wood imitation and distinguishing colour shades. Distinction between Oppeln and Nordhausen undersides accurately reproduced.
On order, lead time to be confirmed