Road Vehicles
Kit. Prototype data: Working width 2.5 – 8.5 m, 6 cylinder DEUTZ diesel engine with 82 kW/112 HP. Max. weight 17.9 t. L 7.2 x W 3.0 – 5.0 x H 4.2 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Engine power 752 kW/1025 HP, max. speed 68 km/h, payload 87 t. Dump capacity 53 m³. These big tippers with modern diesel engines, a low-emission model, with permanent four-wheel drive achieve, even in difficult areas, a huge traction and climbing ability as well as an excellent driving stability and therefore short periods of circulation and a high transport volume. L 12.0 x W 6.5 x H 5.8 – 11.5 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. L 5.3 x W 2.1 x H 3.2 cm Level of difficulty: 1 (beginners)
On order, lead time to be confirmed
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP. Manufactured in two-colour injection moulding process. L 10.0 x W 2.3 x H 2.7 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances. L 10.5 x W 8.2 x H 4.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: FENDT Favorit Vario 926, 191 kW/260 HP, speed 0.02 – 50 km/h. The kit includes 6 trunks. L 8.5 x W 3.0 x H 4.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. MAN 2-axle truck with KÖPF platform for cattle transport and 3-axle trailer. L 22.0 – 24.5 x W 3.0 x H 4.5 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. L 7.0 x W 4.0 x H ca. 5.0 – 8.0 cm Dolly L ca. 5.0 x W 2.7 x H 3.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: The double drum winch 8002 TL of company IGLAND has a pulling power of 2 x 8.0 t and a max. rope capacity of 2 x 107.0 m for a rope diameter of 12.0 mm. With a power requirement of 53 HP per drum the MB TRAC is the correct tractor to drive the winch. As the winch is mounted in the rear linkage only, the tractor can still be used in agriculture. With the shield, which can be mounted to any front loader, the wood can be sorted at the lumberyard. The kit includes 6 trunks. L 8.5 x W 3.0 x H 4.0 – 6.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP. L 5.0 x W 2.2 x H 2.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 276 kW/375 HP engine power, cutting width 6 – 9 m and computerized controls for adjustment and handling make this combine harvester perfect for contractors and large farms. The model CLAAS LEXION 480 is equipped with a 7.5 m wide cutting device and a 10,500 l grain tank. L 13.5 – 22.5 x W 7.0 – 9.0 x H 4.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances. L 6.4 x W 3.0 x H 3.7 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. With loading bridge. The kit includes 12 trunks. L 19.5 x W 3.5 – 4.0 x H 5.0 – 12.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Telescoping boom 38 m, lattice boom 11.3 m, max. working load 50 t, 6 cylinder diesel engine with 270 kW/367 HP, max. speed 85 km/ h, total ballast 9 t. Dimensions driving position: L 14 x W 3.5 x H 4.5 cm. Extended: L 12 x W 7.5 x H 43 cm. Level of difficulty: 2 (advanced).
On order, lead time to be confirmed
Kit. L 9.5 x W 2.8 x H 3.3 cm / L 7.8 x W 2.8 x H 3.3 cm 2x L 7.8 x W 2.6 x H 2.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Protoype data: 5-axle, max. lifting capacity 160 t. Lifting height with folding top 96 m, max. range with folding top 74 m. This mobile crane stands out due to several performance profiles, which make it the market leader of its class. Powered by a 400 kW/554 HP strong LIEBHERR turbo diesel engine. As a result, the crane became compact, agile and weight-optimized. Driving position L 17.5 x W 3.7 x H 4.6 cm Extended L 15.8 x W 14.5 x H 41.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. With swing-away KNAACK. Driving position L 24.0 x W 3.8 x H 4.6 cm Extended L 15.5 x W 14.0 x H 43.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. Prototype data: As of 1988 the 8-axle telescopic crane LTM 1400 was produced at the LIEBHERR company. Temporarily it was the most successful unit of the 400 t-class. Despite of 96 t total weight including 50 m telescopic boom, this today no longer produced crane with only 17.5 m length, was compact and manoeuvrable. Powered by DAIMLER-BENZ turbo engine with 390 kW/530 HP. Driving position L 23.0 x W 4.0 x H 6.0 cm Extended L 23.5 x W 17.0 x H ca. 70.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. Prototype data: Telescopic crane with extended jib, built as of 1979. This 6-axle vehicle was considered as very compact and versatile in its class. The lattice jibs are transported adjacent to the telescopic mast parts on respective brackets. Driving position L 19.0 x W 4.0 x H 5.0 cm Extended L 17.0 x W 4.0 x H 55.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. Prototype data: MERCEDES-BENZ 10 cylinder diesel engine, type OM 423 A, 300 kW/408 HP, lifting capacity 800 t, crawler chassis with two separate drives on each side, heavy boom 35 – 77 m, suspended ballast max. 250 t. Because of the extrem dimensions the crane must be disassembled into its separate parts. So the crawler chassis, the lattice masts and the ballast weight can be transported individually. L 28.0 x W 11.5 x H 45.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. Prototype data: 6-axle, 8 cylinder DAIMLER-BENZ diesel engine OM 442 LA with 405 kW/550 HP, max. lifting capacity 250 t, boom length 58 m. This model is a mobile crane with newest technology for lifting operations up to 250 t. With its 6-axle drive and a high speed of 70 km/h it is accordingly manoeuvrable. With a 4-fold telescopic mast for lifting heights up to 58 m. With superlift facility to increase the lifting capacity. Driving position L 21.0 x W 4.0 x H 5.0 cm Extended L 19.0 x W 14.0 x H 59.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. L 30.0 x W 8.0 – 22.0 x H 72.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. L 29.5 x W 8.0 – 24.0 x H 63.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. Prototype data: The DEMAG AC 665 is a 6-axle vehicle with 250 t lifting load and 58 m main boom. The shipping weight is about 72 t with full equipment including main boom and outriggers. An independent rear-axle steering system allows to operate also in the smallest construction sites. The finely gradated gear box with 16 gears provides an optimized adaptation to all streets and area conditions. Driving position L 21.0 x W 4.0 x H 5.0 cm Extended L 19.0 x W 14.0 x H 59.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed