Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Road Vehicles

Filter products
New
Motorized 2/3-way turnout
Viessmann 8448 Scale H0
Motorized 2/3-way turnout

This turnout is equipped with a powerful and low-noise drive featuring secure positioning achieved by a robust 10 mm motor with planetary gear. By rearranging the variable end stops, a left, right, or 3-way diversion can be selectively created. The electronics are housed compactly within the casing. The diverter can be controlled manually, via buttons/switches or our InduktivCharger, item 8408, enabling digital control capabilities. Like the vehicles, the turnout can be comfortably configured in the CarManager.

Selling price: CHF 54.90 RRP CHF 60.80

On order, lead time to be confirmed

10% off the recommended price
H0 Retrofit kit Sound for MAGIRUS square bonnets, red
Viessmann 8450 Scale H0
H0 Retrofit kit Sound for MAGIRUS square bonnets, red

Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8002, 8012, 8018, 8135. L 18 x W 8.8 x H 11.4 mm

Selling price: CHF 48.90 RRP CHF 54.60

On order, lead time to be confirmed

10% off the recommended price
H0 Retrofit kit Sound for MB round bonnets, red
Viessmann 8451 Scale H0
H0 Retrofit kit Sound for MB round bonnets, red

Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8019 L 22.5 x W 11.2 x H 9.3 mm

Selling price: CHF 48.90 RRP CHF 54.60

On order, lead time to be confirmed

10% off the recommended price
H0 Retrofit kit Sound for MB round bonnets, black
Viessmann 8453 Scale H0
H0 Retrofit kit Sound for MB round bonnets, black

Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8017, 8022, 8034, 8035, 8052, 8072. L 22.5 x W 11.2 x H 9.3 mm

Selling price: CHF 48.90 RRP CHF 54.60

On order, lead time to be confirmed

10% off the recommended price
H0 Retrofit kit Sound for MB ACTROS, black
Viessmann 8455 Scale H0
H0 Retrofit kit Sound for MB ACTROS, black

Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8040, 8160. L 2.5 x W 1.2 x H 1.1 mm

Selling price: CHF 48.90 RRP CHF 54.60

On order, lead time to be confirmed

10% off the recommended price
H0 Retrofit kit Sound for MB ACTROS, grey
Viessmann 8456 Scale H0
H0 Retrofit kit Sound for MB ACTROS, grey

Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8041, 8114, 8115. L 2.5 x W 1.2 x H 1.1 mm

Selling price: CHF 48.90 RRP CHF 54.60

On order, lead time to be confirmed

CarMotion base module L 90 x W 54 x H 10 cm
Viessmann 8460 Scale H0
CarMotion base module L 90 x W 54 x H 10 cm

This module is ideal for designing a wide variety of model scenes. It can, e. g. serve as a connecting element or a thematic intermediate segment that integrates seamlessly into a larger layout. Features include a pre-milled groove for 1 mm magnetic tape, item 8430 and breakout holes for the InduktivCharger, item 8408 or turnout, items 8445/8448. Supplied with acrylic glass panels for edging. L 90 x W 54 x H 10 cm

Selling price: CHF 175.00 RRP CHF 194.10

On order, lead time to be confirmed

Track for CarMotion Basic Module, Item 8460
Viessmann 8461 Scale H0
Track for CarMotion Basic Module, Item 8460

The track (item 8461) is a practical addition to the Viessmann CarMotion base module (item 8460). It has been specially developed for testing and demonstration purposes. The precisely cut, printed cardboard is placed on the base module, enabling a quick and effective demonstration of the system. Please note: The track is made of printed cardboard and is therefore not designed for continuous use. It is suitable for temporary use, e.g. at trade fairs, demonstrations or for testing purposes L 88 x W 52 cm

Selling price: CHF 10.00 RRP CHF 11.10

On order, lead time to be confirmed

Mounting ring for CarMotion modules Ø 30 mm, 3 pieces
Viessmann 8462 Scale H0
Mounting ring for CarMotion modules Ø 30 mm, 3 pieces

For attaching CarMotion modules, e. g. InduktivCharger, item 8408, or turnout, item 8448, from below.

Selling price: CHF 10.00 RRP CHF 11.10

On order, lead time to be confirmed

10% off the recommended price
Accessory set for trucks and buses
Viessmann 8470 Scale H0
Accessory set for trucks and buses

This practical accessory set includes a remote control, 10 meters of magnetic tape (0.5 mm), 10 permanent magnets, as well as a charger and a programming device.

Selling price: CHF 95.90 RRP CHF 106.90

On order, lead time to be confirmed

10% off the recommended price
H0 Truck workshop - Polyplate kit
Vollmer 45642 Scale H0
H0 Truck workshop - Polyplate kit

Timeless workshop building made of Polyplate composite material. The worshop is expandable with item 45643 (1 door element each). L 17.2 x W 15.5 x H 7.1 cm

Selling price: CHF 79.90 RRP CHF 88.90

On order, lead time to be confirmed

10% off the recommended price
H0 Extension set for truck workshop 45642 - Polyplate kit
Vollmer 45643 Scale H0
H0 Extension set for truck workshop 45642 - Polyplate kit

Extension set for individual extension of truck workshop, item 45642. L 17.2 x W 5.5 x H 7.1 cm

Selling price: CHF 30.90 RRP CHF 34.60

On order, lead time to be confirmed

10% off the recommended price
N Truck workshop - Polyplate kit
Vollmer 47558 Scale N
N Truck workshop - Polyplate kit

Timeless workshop building made of Polyplate composite material. The worshop is expandable with item 47563 (1 door element each). L 9.3 x W 8.1 x H 3.9 cm

Selling price: CHF 56.90 RRP CHF 63.50

On order, lead time to be confirmed

H0 Extension set for truck workshop 47558 - Polyplate kit
Vollmer 47563 Scale N
H0 Extension set for truck workshop 47558 - Polyplate kit

Extension set for individual extension of truck workshop, item 47558. L 9.3 x W 2.6 x H 3.9 cm

Selling price: CHF 25.90 RRP CHF 28.40

On order, lead time to be confirmed

10% off the recommended price
H0 Stationary loading and unloading ramp for Märklin heavy-duty trucks
Vollmer 48289 Scale H0
H0 Stationary loading and unloading ramp for Märklin heavy-duty trucks

Kit. The stationary loading and unloading ramp for heavy-duty trucks (Märklin 48740), also known as a rolling highway, is a permanently installed ramp solution specifically designed for the safe loading and unloading of CarMotion vehicles. This ramp provides a stable and durable means of moving CarMotion vehicles onto and off heavy transporters, ensuring smooth and reliable logistics during transportation operations. A road surface made of Vollmer Stone Art asphalt is included with the ramp, offering maximum durability and slip resistance. Available as a white model for self-painting. Dimensions: L 7 x W 6.4 x H 2.9 cm

Selling price: CHF 22.90 RRP CHF 25.50

On order, lead time to be confirmed