Road Vehicles
Finished model. Prototype data: Length approx. 11.3 m, height approx. 3.7 m, width approx. 2.9 m, wheelbase 6.5 m. Water cooled diesel engine, 440 kW/598 HP at 1900 rpm, max. speed 129 km/h. Starting tractive effort 90 kN, towing capacity 2,000 t, net weight approx. 25,000 kg, max. weight (fully loaded) approx. 30,000 kg. PALFINGER loading crane type PK 19000. Suitable for waggon 55.54 with construction equipment item 16308. Lob 13.4 x W 3.6 – 7.0 x H 4.8 – 15.5 cm
On order, lead time to be confirmed
Finished model. The ballast collector units are suitable for any kind of bulk material and can be assembled into trains of any length. All conveyors are hydraulically driven. The energy is delivered by a diesel engine. Suitable for H0 buffer waggon. item 26264. With high quality pad printing. With NEM shaft. Lob 26.3 cm / L 31.0 x W 3.5 x H 4.5 cm
On order, lead time to be confirmed
All vehicles of series item 262xx are equipped with DC wheelsets. For all AC users we offer a package of 2 wheelsets for exchange. Ø 11.0 mm
On order, lead time to be confirmed
Finished model. The ATLAS excavator 1604 is mounted on the low side car and could be moved 360° ready to be used on track construction sites. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 3.5 x H 5.0 cm
On order, lead time to be confirmed
Finished model. Low side car loaded with ATLAS excavator 1604 standard version. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 3.5 x H 6.0 cm
On order, lead time to be confirmed
Finished model. Another highlight in our series GleisBau is this low side car which is used mainly for the repair and maintenance of catenary. The three-stage work platform can be equipped individually and thus you can create a rail construction site by your wishes. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 4.7 x H 5.5 cm
On order, lead time to be confirmed
Finished model. Suitable for items16150 and 26150 PLASSER & THEURER ballast collector MFS 100. Equipped with DC wheelset. Exchange wheelset AC item 26245. Equipped with ingenious close-coupling kinematics and NEM-shaft. Lob 15.8 x W 3.6 x H 4.5 cm
On order, lead time to be confirmed
Finished model. Together with item 26262 you can create a prototypical maintenance train for catenary mounting. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 3.6 x H 5.0 cm
On order, lead time to be confirmed
Finished model. Low side car equipped with 2 supply containers from GleisBau series. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 3.5 x H 4.8 cm
On order, lead time to be confirmed
Finished model. Low side car equipped with 3 cable reels from GleisBau series. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft. Lob 15.8 x W 3.5 x H 4.8 cm
On order, lead time to be confirmed
Finished model. The model is equipped with ingenious close-coupling kinematics and NEM shaft. Equipped with DC wheelset. Lob 15.8 x W 3.5 x H 5.5 cm
On order, lead time to be confirmed
Finished model. Prototype data: This newly developed ballast renewal machine from Plasser & Theurer is equipped with 2 drive options – electric and diesel-electric (hybrid) – by means of a 600 kW diesel engine. Driving engines and hydraulics are always driven electrically. The electric drive allows for a low-maintenance, as well as silent and low-emission operation (CO2-reduced). The trendsetting design is mainly function-orientated and keyed to enhance work safety. The model is to a high degree a copy of the prototype in terms of both function and design. This kit is a completely new design and has been derived from the Viessmann functional model item 2670. It is a high-quality and decorative model, equipped with metal wheel sets and zinc diecasting chassis and, therefore, has very good rolling characteristics. The housings are varnished. With high quality pad printing. Lob 39.3 x W 3.9 x H (without/with pantograph) 5.1/7.6 cm
On order, lead time to be confirmed
Kit. 6 different truck combinations with DAF and MB tractors and tank, silo, and platform/tarpaulin semi-trailers. L 6.5 x W 1.3 x H 1.5 cm / L 6.4 x W 1.3 x H 1.6 cm L 4.9 x W 1.3 x H 1.3 cm / L 5.8 x W 1.3 x H 1.3 cm L 8.7 x W 1.3 x H 1.7 cm / L 7.1 x W 1.3 x H 1.7 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Rumpler lorry RuV 31, dark blue, final paint scheme up to 1942 (radiator grille blue, roof light grey).
On order, lead time to be confirmed
Rumpler lorry RuV 31, dark blue, paint scheme on delivery (radiator grille gold, roof black).
On order, lead time to be confirmed
Rumpler lorry RuV 31, silver-metallic, without paint scheme and lettering, condition during testing.
On order, lead time to be confirmed
Rumpler lorry RuV 29, experimental red livery, without markings. The publishing house Ullstein did not like the red experimental paint scheme, so the vehicle was repainted.
On order, lead time to be confirmed
Rumpler lorry RuV 29, green, final paint scheme until 1942 (radiator grille green, roof light grey).
On order, lead time to be confirmed
Rumpler lorry RuV 29, green, paint scheme on delivery (radiator grille gold, roof black).
On order, lead time to be confirmed
Prototype Tempo Hanseat three-wheeler with a bed. Condition of Era III and later. Model Delivery vehicle Tempo Hanseat with a load bed for 1 gauge. Finely detailed model, equipped with interior details, a driver figure, and mirrors. The vehicle is constructed of plastic with real rubber tyres, can roll, and the rear axle is sprung. Vehicle length approximately 14 cm. Highlights Finely detailed
On order, shipped within 10-15 days
Contents: Individual parts for building the following 12 differently coloured car models. 3 Mercedes-Benz 500 SE, 3 Opel Rekord Caravan, 3 BMW 735i and 3 VW Passat.
On order, shipped within 10-15 days
Realistic truck drivers and co-drivers for your model world An empty truck driver's cab looks lifeless - with our realistic figures "Lorry Drivers and Co-Drivers" , you can bring dynamism and authenticity to your model world. The detailed and hand-painted figures are specially designed for use in H0 (1:87) scale model trucks. Manufactured without legs, they fit perfectly into the driver's cabs and create a realistic scene on the roads and highways of your model layout. Each figure wears typical work clothing, from robust dungarees and overalls to comfortable jeans with a T-shirt or jacket. The poses are lively and close to everyday life - the driver with a concentrated look and a firm grip on the steering wheel, the co-driver relaxed with arms folded or casually looking out of the window. These lovingly designed characters will make your model landscape even more realistic and lively. They are the perfect addition for anyone who values true-to-original details and wants to bring their vehicles to life. (without Legs)
On order, shipped within 4-5 days
Cyclists - everyday life and motion on two wheels Cyclists are an integral part of everyday life in towns and villages. They represent mobility, routine and conscious movement through familiar surroundings. With the “Cyclists” figures by NOCH, you bring this natural sense of motion to your model landscape. Whether commuting, stopping near a station or riding through a residential area, the scenes feel authentic and relatable. As is typical for NOCH, the figures are carefully painted and rich in detail, developed and designed in Germany. Postures, clothing and bicycles are realistically crafted, conveying movement in a subtle and believable way. This creates convincing everyday scenes that add life and character to your layout. The figures offer a wide range of applications. On a model railway, cyclists enhance station surroundings, roads or transitions between urban and rural areas. In model building, they are ideal for depicting scenes from working life or the countryside. They are also perfectly suited for decoration, dioramas or macro photography, capturing everyday motion with natural realism. Combined with other NOCH figure worlds, they help create a miniature world that truly reflects real life.
On order, shipped within 4-5 days
Cyclists With the NOCH “Cyclists” figure set (item no. 15898), you can bring movement and dynamism to your 1:87 scale model landscape (H0 gauge). This set contains four hand-painted figures on three bicycles depicting various everyday scenes. A man on a blue bicycle has his briefcase attached to the luggage rack, which identifies him as a commuter on his way to work. A young man on a red bicycle transports a young woman in a yellow T-shirt on the carrier, who is happily enjoying the ride. An elderly lady on a bicycle has secured her shopping basket to the carrier and is also holding a head of lettuce pressed against the handlebars. The detailed design and lively poses of the figures allow you to depict realistic and varied scenes on streets, cycle paths or in parks in your model world. Whether in the city or in the countryside - with these cyclists you can give your layout an authentic and lively atmosphere. Thanks to the high-quality workmanship and precise painting, the figures fit seamlessly into any scenery and set dynamic accents. Enrich your model landscape with the NOCH “Cyclists” figure set and bring the charm of everyday life to life in miniature form.
On order, shipped within 4-5 days