Road Vehicles
Fortschritt ZT 300 tractor To improve agriculture, the development of a new tractor was determined in 1962 by resolution of the GDR Council of Ministers. With a target of 100 hp and a tractive force of 14,000 kN, the tractor was to achieve “world-class standard”. The first functional prototype of the ZT 300 was then available in 1964 for extensive testing. In 1967 the ZT 300 was tested by Dipl. Ing. Erwin Stieglitz of the Central Testing Centre for Agricultural Engineering in Potsdam-Bornim, and in July 1967 the tests were concluded with a positive result. Chief designer Dipl. Ing. Reinhard Blumenthal and the team at the Schönebeck tractor works developed a modern and powerful tractor in the ZT 300, which went into series production the same year. At the beginning of the 80s there were 35,000 ZTs in total, which were followed only in 1978 by the improved ZT 320/323, which went into series production from 1984. However, as it received no significant innovations apart from its appearance, the connection to the world standard was lost. Technical data Engine: 4 VD 14,5/12-1 SRW MAN system (4-stroke diesel/direct injection) Gearbox: sliding-sleeve gearbox with stage that can be shifted under load / double clutch Clutch: double clutch DK 80 Power take-off: front, centre and rear, speeds 540 and 1000 rpm with 650 Nm torque Hydraulics: dual-flow radial piston pump Power lift: automatic control with depth control, lifting force 1800 kp, swivel angle 800 Steering: mechanical hydraulic steering gear type 440 with hydr. assistance (later fully hydraulic steering) Braking system: foot brake, hydr. internal shoe brake; handbrake, mech. band brake acting on brake drum; hydraulic brake selector for individual wheel braking Electrical system: thrust-screw starter 24 volts, 4 hp, alternator 12 V 500 W Tank: 130 litres Main dimensions: length: 4690 mm, width: 2020 mm (with track width of 1550 mm), height above bonnet: 1800 mm, wheelbase: 2800 mm, track width: 1550 - 2000 mm, Ground clearance: approx. 460 mm Vehicle weight: 4820 kg unladen The following type designations give information about the model: C stands for the revised version with 100 hp (previously 90 hp). D stands for a further revised version of the C series with many details, such as a fuel gauge in the dashboard, optional windscreen washer system, extendable lower links on the power lift and a reinforced roll-over frame, to name just a few important ones. E stands for a kind of “luxury version”, a further development of the D series intended exclusively for export to France, Belgium, Angola, Vietnam, Spain etc., among others. These models were mainly adapted to the requirements of the country of delivery; for example, starters and alternators from Bosch were fitted or the hydraulics were made tropic-proof on request. The detailed 1:87 scale miniature, with its coarse-treaded tyres and perfect shape with razor-sharp contour lines, is a special model that should not be missing from any collection or any model railway layout.
On order, lead time to be confirmed
Fortschritt ZT 303 tractor, all-wheel drive To improve agriculture, the development of a new tractor was determined in 1962 by resolution of the GDR Council of Ministers. With a target of 100 hp and a tractive force of 14,000 kN, the tractor was to achieve “world-class standard”. The first functional prototype of the ZT 300 was then available in 1964 for extensive testing. In 1967 the ZT 300 was tested by Dipl. Ing. Erwin Stieglitz of the Central Testing Centre for Agricultural Engineering in Potsdam-Bornim, and in July 1967 the tests were concluded with a positive result. Chief designer Dipl. Ing. Reinhard Blumenthal and the team at the Schönebeck tractor works developed a modern and powerful tractor in the ZT 300, which went into series production the same year. At the beginning of the 80s there were 35,000 ZTs in total, which were followed only in 1978 by the improved ZT 320/323, which went into series production from 1984. However, as it received no significant innovations apart from its appearance, the connection to the world standard was lost. Technical data Engine: 4 VD 14,5/12-1 SRW MAN system (4-stroke diesel/direct injection) Gearbox: sliding-sleeve gearbox with stage that can be shifted under load / double clutch Clutch: double clutch DK 80 Power take-off: front, centre and rear, speeds 540 and 1000 rpm with 650 Nm torque Hydraulics: dual-flow radial piston pump Power lift: automatic control with depth control, lifting force 1800 kp, swivel angle 800 Steering: mechanical hydraulic steering gear type 440 with hydr. assistance (later fully hydraulic steering) Braking system: foot brake, hydr. internal shoe brake; handbrake, mech. band brake acting on brake drum; hydraulic brake selector for individual wheel braking Electrical system: thrust-screw starter 24 volts, 4 hp, alternator 12 V 500 W Tank: 130 litres Main dimensions: length: 4690 mm, width: 2020 mm (with track width of 1550 mm), height above bonnet: 1800 mm, wheelbase: 2800 mm, track width: 1550 - 2000 mm, Ground clearance: approx. 460 mm Vehicle weight: 4820 kg unladen The following type designations give information about the model: C stands for the revised version with 100 hp (previously 90 hp). D stands for a further revised version of the C series with many details, such as a fuel gauge in the dashboard, optional windscreen washer system, extendable lower links on the power lift and a reinforced roll-over frame, to name just a few important ones. E stands for a kind of “luxury version”, a further development of the D series intended exclusively for export to France, Belgium, Angola, Vietnam, Spain, among others. These models were mainly adapted to the requirements of the country of delivery; for example, starters and alternators from Bosch were fitted or the hydraulics were made tropic-proof on request. The detailed 1:87 scale miniature of the all-wheel-drive tractor, with its coarse-treaded tyres and perfect shape with razor-sharp contour lines, is a special model that should not be missing from any collection or any model railway layout.
On order, lead time to be confirmed
Fortschritt ZT 303 tractor, all-wheel drive To improve agriculture, the development of a new tractor was determined in 1962 by resolution of the GDR Council of Ministers. With a target of 100 hp and a tractive force of 14,000 kN, the tractor was to achieve “world-class standard”. The first functional prototype of the ZT 300 was then available in 1964 for extensive testing. In 1967 the ZT 300 was tested by Dipl. Ing. Erwin Stieglitz of the Central Testing Centre for Agricultural Engineering in Potsdam-Bornim, and in July 1967 the tests were concluded with a positive result. Chief designer Dipl. Ing. Reinhard Blumenthal and the team at the Schönebeck tractor works developed a modern and powerful tractor in the ZT 300, which went into series production the same year. At the beginning of the 80s there were 35,000 ZTs in total, which were followed only in 1978 by the improved ZT 320/323, which went into series production from 1984. However, as it received no significant innovations apart from its appearance, the connection to the world standard was lost. Technical data Engine: 4 VD 14,5/12-1 SRW MAN system (4-stroke diesel/direct injection) Gearbox: sliding-sleeve gearbox with stage that can be shifted under load / double clutch Clutch: double clutch DK 80 Power take-off: front, centre and rear, speeds 540 and 1000 rpm with 650 Nm torque Hydraulics: dual-flow radial piston pump Power lift: automatic control with depth control, lifting force 1800 kp, swivel angle 800 Steering: mechanical hydraulic steering gear type 440 with hydr. assistance (later fully hydraulic steering) Braking system: foot brake, hydr. internal shoe brake; handbrake, mech. band brake acting on brake drum; hydraulic brake selector for individual wheel braking Electrical system: thrust-screw starter 24 volts, 4 hp, alternator 12 V 500 W Tank: 130 litres Main dimensions: length: 4690 mm, width: 2020 mm (with track width of 1550 mm), height above bonnet: 1800 mm, wheelbase: 2800 mm, track width: 1550 - 2000 mm, Ground clearance: approx. 460 mm Vehicle weight: 4820 kg unladen The following type designations give information about the model: C stands for the revised version with 100 hp (previously 90 hp). D stands for a further revised version of the C series with many details, such as a fuel gauge in the dashboard, optional windscreen washer system, extendable lower links on the power lift and a reinforced roll-over frame, to name just a few important ones. E stands for a kind of “luxury version”, a further development of the D series intended exclusively for export to France, Belgium, Angola, Vietnam, Spain, among others. These models were mainly adapted to the requirements of the country of delivery; for example, starters and alternators from Bosch were fitted or the hydraulics were made tropic-proof on request. The detailed 1:87 scale miniature of the all-wheel-drive tractor, with its coarse-treaded tyres and perfect shape with razor-sharp contour lines, is a special model that should not be missing from any collection or any model railway layout.
On order, lead time to be confirmed
"Off to the fields!" Now the H0 tractors can prepare the miniature arable land. With the highly detailed B200 ridge plough from VEB Weimar-Kombinat Landmaschinen (Bodenbearbeitungsgeräte Leipzig plant), all tractors can be retrofitted and realistically staged.
On order, lead time to be confirmed
"We're going blue!" At least as far as the colour is concerned. The highly detailed B200 bed plough from VEB Weimar-Kombinat Landmaschinen (Bodenbearbeitungsgeräte Leipzig plant) is now also available in blue (specifically to match all blue Fortschritt tractors and all other H0 scale tractors), ready for you to order your miniature fields. With this upgrade, many scenes can be realistically recreated.
On order, lead time to be confirmed
All-wheel-drive tractor ZT 303 with a mounted centrifugal manure spreader D 028/5 with a 600-litre capacity tank. The mounted fertiliser spreader, dating from 1986, was manufactured in the VEB Landmaschinenbau "Rotes Banner" in Döbeln, Saxony.
On order, lead time to be confirmed
Tank trailer from the fleet of the former Agro Chemisches Zentrum (ACZ) in Delitzsch, Saxony, which ventured into the market economy and operated as Delitzscher Landhandels und Dienste GmbH. The main tasks of the GDR's ACZ included, among other things, the storage and application of fertilisers and plant protection products.
On order, lead time to be confirmed
"...who digs in the pit so late..." The introduction of the Weimar Mobilbagger T174 (VEB Weimar Werk) began as early as 1965. Continuous design changes led to the type designations "T 174.1, T 174.2 and T 174.2A". However, there was only one truly significant change. With the series introduction of the T 174.2 from 1974, additional hydraulic supports were fitted after the underframe was revised.
On order, lead time to be confirmed
Yellow excavator T 174-2 with hopper BA Z 37 for the fertiliser loading of the ACZ (Agrar Chemisches Zentrum) in Pritzwalk, Brandenburg.
On order, lead time to be confirmed
Red fire engine with radio call sign "Florian Rhede 1 LF 20/2" of the Rhede (North Rhine-Westphalia) fire brigade.
On order, lead time to be confirmed
Fire engine red emergency ambulance (NAW) of the Frankfurt Airport fire service in the design of the late 1980s or early 1990s with a medium blue/dark blue waist band. (See also the Mercedes-Benz VF 123 Miesen counterpart «Feuerwehr Fraport Frankfurt» / item no. 52223)
On order, lead time to be confirmed
In the old brickworks, there are not only high-quality bricks, as unfortunately some are rejected because not all bricks survive the firing process. For these cases, the trailer is ready and takes the brick rubble to the nearest spoil heap.
On order, lead time to be confirmed
Hay transport trailer with hay rolls.
On order, lead time to be confirmed
The coach features the finest printing on decorative strips and a multi-colour brand logo on both sides; even the curtains are printed in an ultra-thin layer, so that every fold is easily visible.
On order, lead time to be confirmed
A brilliant idea! A caravan based on an American prototype, complete with curtains and the typical high-gloss aluminium finish.
On order, lead time to be confirmed
"Braeburn, Boskop and Elstar, all the apples are here." The deliciously scented apples are packed in crates or sacks on the trailer. It was a good apple year, all the containers are full and are now being transported. The nice apples in the crates go to the fruit shops, the less nice ones in the sacks go to the apple press. We will soon enjoy the tasty apple juice.
On order, lead time to be confirmed
Nothing ventured, nothing gained! The design of the '57 Bel Air goes back to 1953, when it was still considered too “daring”. In this matter Chevrolet pursued a rather cautious model policy. The predecessor models of 55 and 56 do indeed look rather staid compared with the more distinctive 57, although the broad line was retained. The name “Bel Air” had already been carried by the hardtop coupé of the Two-Ten series of the 1952 model year, which was then used a year later for the model's own series with serial number 2400C. Even when it appeared, the Bel Air was regarded as Chevrolet's absolute top model. It could be equipped with many extras such as air conditioning, power steering, power pump and automatic transmission, and from 1955 even with a V8 engine. In addition to the two- and four-door saloon, coupé and estate, it was also available as a convertible with a fabric roof or as a hardtop version. With this model Chevrolet hit the nail on the head as far as the fashion taste of the time was concerned. The 57 model with its tail fins was particularly smart and is still highly prized by classic car enthusiasts today. The fact that the car also offered a great deal of space and was very economical to run brought the Bel Air an exact sales figure of 702,226 units. As the basic version of the tail-finned car also cost between 2,239 and 3,465 US dollars, the vehicle was also quite reasonably priced compared with competing models. The 1:87 scale model of the Bel Air is likewise available in many variants and thus enriches the collectors' scene with beautiful, colour-harmonious miniatures.
On order, lead time to be confirmed
Always love. The newly in love couple drives through the summer landscape in their elegant Caddy. The pretty convertible with white-wall tyres is not only a popular vehicle in feature films, but was also favoured by Elvis Presley. It is THE American luxury car of the 1950s and also an absolute classic in the Cadillac range.
On order, lead time to be confirmed
Women’s power!!! The wild Hilde, with her flowing mane, thunders through the city with leaden feet. Friend Roman tries to brake her and raises his hand in a reprimanding gesture – no chance! Nierentisch, Petticoat and Rock ‘n’ Roll – the wild 1950s. Just the right time for an extravagant “cheeky” sports car – the Ford Thunderbird. The elegant two-seater with its V8 engine was initially positioned as competition for the Chevrolet Corvette, which was introduced in February 1953.
On order, lead time to be confirmed
A major fire in the city, all LaFrance fire engines have been dispatched; hopefully, everything has gone off without a hitch…
On order, lead time to be confirmed
A major fire in the city, all LaFrance fire engines have been dispatched; hopefully, everything has gone off without a hitch…
On order, lead time to be confirmed
Even during the German occupation of France, Ferdinand Picard and Edmond Serre of the Renault development office had ideas for the development of a new automobile: economical, inexpensive and with low fuel consumption, although developing civilian vehicles was forbidden under the occupation-loyal Vichy government. A first prototype of the later 4 CV, painted light green, was built as early as 1942 during the occupation. In November 1945 another model came onto the market. At the request of Pierre Lefaucheux, four doors were provided for this light vehicle, of which the front ones opened forwards. Pierre L., a trained railway engineer, was an enthusiastic supporter of the 4 CV project. He died on 11 February 1955. The new automobile had a revolutionary rear engine similar to that of the “KDF” (Volkswagen), which Edmond Serre had already seen at the Berlin motor show in 1939. After the war, even Prof. Ferdinand Porsche was briefly brought out of his house arrest as a prisoner of war in Zell am See, and he carried out some tests and test drives. On 3 October 1946 the new Renault 4 CV was presented to the public at the Grand Palais on the occasion of the 33rd Motor Show. Production of 170,000 models over the course of five years was planned. On the “memorable Tuesday”, 12 August 1947, the first 4 CV left the production lines of the Île Seguin in Billancourt. It was the first of a series of 300, painted sand yellow with paints from the stocks of the former Deutsches Afrikakorps. In those years there was one car for every five citizens in the USA, one car for every 50 in England and one car for every 80 inhabitants in France. From the Renault works in Billancourt, 1,000,000 4 CVs were sent to all countries of the world. A total of six foreign assembly plants themselves put together the mechanical engine units and bodywork parts that arrived from Billancourt, and around 6,000 Renault dealers ensured servicing of the 4 CV all over the world. All of them had a complete stock of original Renault spare parts. Technical details of the car affectionately known as the “Cremeschnittchen”: 5.7 litres of petrol per 100 km Rear engine, four-stroke, 4 cylinders, Total displacement: 747 cc 26.4 hp 3-speed gearbox The prototype of the Busch model in 1:87 is the 1958 version. The differences between the 58 and 46 series lie in the design of the radiator. The radiator of the first vehicles was adorned with six chrome trim strips, which a few years later were reduced to just three in total. In 1954 the first model with three radiator trim strips and a round emblem appeared, which four years later changed back into the familiar diamond-shaped Renault logo. Of the Renault 4CV Décapotable (convertible saloon) presented from October 1949 at the Paris Motor Show, 71,068 vehicles were built up to the end of production in 1957. The model impresses with its exact reproduction of the shape, sharp contours and various chrome parts. The extremely fine chromed radiator is particularly noteworthy.
On order, lead time to be confirmed
The engine is indestructible! Even though the exterior has been repaired several times, the engine is in top condition. On the driver’s side, the rear door had to be replaced, along with the boot lid. A little later, the wing and the door on the passenger side even had to be replaced. Did the wife perhaps overlook the gate? But here again, the first parts are starting to rust.
On order, lead time to be confirmed
Post-Auto from Graubünden / Switzerland. This vehicle also serves the passenger transport of the area located entirely in the Alps. It connects the villages of Fideris, Jenaz, Furna, Jenaz and Küblis. The bus probably occasionally transports various packages over the long journey through the Alps. The interesting colour scheme of the vehicle stands out particularly, and in the winter months people will appreciate a splash of colour in this region.
On order, lead time to be confirmed