Scenery Accessories
Kolonnenweg for improved operational capability along the inner-German border. The ground on the GDR side was paved with so-called Kolonnenweg concrete plates.
On order, lead time to be confirmed
27 concrete slab elements, each with a base area of 43 x 21 mm (total length over 80 cm). 40 smaller, partly trapezoidal elements for branch lines, curves, etc., and as filler pieces for tracks at level crossings. The assembly is very simple: glue the “concrete” slabs to the layout board. If necessary, use a little dry paint to bring out the wheel tracks. Insert grass tufts and dandelions into the cracks – and you have a really nice old concrete-slab road.
On order, lead time to be confirmed
Filigree metal fence. 5 elements, each 29 mm wide and 17 mm high. With 10 concrete feet. TT gauge
On order, lead time to be confirmed
Versatile chain-link fence for industrial sites, factories, military installations, etc. Concrete posts with anti-climb protection. Large two-wing metal gate that opens. Kit.
On order, lead time to be confirmed
2 steel cages with suitable load, commercial goods or industrial scrap for disposal: lorry or tractor tyres, single-use pallets, machine parts, crates, barrels and pipes.
On order, lead time to be confirmed
Kolonnenweg The Kolonnenweg was a track built to improve the operability of the inner-German border for vehicles. On the GDR side, the ground was secured with so-called Kolonnenweg plates made of concrete. The set includes 32 plates for a model track section over 50 cm in length. Size per Kolonnenweg plate: 34 x 12 mm
On order, lead time to be confirmed
80 mm wide, 120 cm long, with centre lines and side boundary lines.
On order, lead time to be confirmed
Self-adhesive. Same colour and material structure as the asphalt roads. Ideal complement to asphalt road 7086, 9710 or road construction set 7096.
On order, lead time to be confirmed
Keeps your blades good for longer - Facilitates accurate cutting - Soft self-healing PVC layered material - Non-slip surface - Raster printing on the surface as a cutting aid
On order, shipped within 4-5 days
Handy minimat! Long-lasting cutting pad with printed helpful lines, avoids damaging the blades and protects the working surface. Cuts produced in the soft surface close again and are invisible. Can be used on both sides. Grid: cm. Size: 105 x 148 mm, approx. DIN A6.
On order, shipped within 4-5 days
Useful helper! Tool holder with screwing head allowing to drill or file by hand. Ideally suited to receiving small drills.
On order, shipped within 4-5 days
Miniature sizes! Set of 20 metal drills in the range 0.3 to 1.6 mm.
On order, shipped within 4-5 days
Clever working pad! Protects the surface of tables and simultaneously avoids affecting the sharpness of your modeller’s knife. That high-quality long-lasting mat is provided with an horizontal and vertical grid in cm and the printed FALLER logo. The sandwich structure of the material closes by itself after cuts. Format: 300 x 220 x 3 mm (A4).
On order, shipped within 4-5 days
Secure and comfortable holding! Sturdy mosquito forceps made of stainless steel with a slightly curved tip, cross-serrated jaws and a ratchet lock. Ideal for gripping and holding small parts during delicate craft work. Length: 150 mm.
On order, shipped within 4-5 days
Nailing without hammer! That nail setter with sturdy wooden grip is the perfect mounting tool for nails, wire nails and pins that are too small to hold with the fingers. The adjustable bit stop also ensures that all fixing devices are sunk in to the same depth. Possible use e.g. to fix tracks or wire meshes. Length: 155 mm.
On order, shipped within 4-5 days
To apply without any drop. Set comprised of five all-purpose dosing needles with metal points of different size. Ideal for clean and pinpoint application of glues, soldering fluxes or pastes. Particularly helpful on bottles and tubes with large opening, e.g. instant adhesive.
On order, shipped within 4-5 days
Accurately measuring minute quantities. Set of pipettes allowing to mix and transfer colours with an accuracy of one millilitre, to add some thinner or to fill an airbrush. Extreme ease of operation with its precise graduation. Multiple uses.
On order, shipped within 4-5 days
An all-purpose tool. Hand abrasive block allowing to remove rust, deburr, smooth or polish metals, plastics and wood in scale modelling. Removes oxide layers, stains and scratches and ensures high-polished surfaces when cleaning rails and maintaining tracks. Best suited to sharpen small cutters and blades. Perfect for the preparation of surfaces to be painted. Can be used dry or wet. Grain size: 240 (very fine). 80 x 50 x 20 mm.
On order, shipped within 4-5 days
Clean colour edges! Two reels of masking tape of different width for accurate painting and sticking work on tiny parts. Allows sharp separating lines even on curved contours and surfaces, and reliably prevents the infiltration of colours, paints and fluid varnishes. Easy to remove without any residue. Widths: 6 mm and 10 mm. Length: 18 m.
On order, lead time to be confirmed
Deburring tool for processing plastic moulding parts, in plastic model making, photo-etched parts and war-gaming figures. The tool has an ergonomic handle which allows you to smooth unwanted sprue marks and burrs without damaging the surface of the material. Excellent for preparing surfaces for bonding or priming. - Removes sprue marks and burrs on moulded parts - Ideal for handling plastic moulding parts, in plastic model making, photo-etched parts and war-gaming figures - Perfect preparation of surfaces for bonding or priming
On order, shipped within 4-5 days
Ideal helper for constructing model buildings and to safely grip, hold and clamp workpieces. Equally suitable for flat or unusually shaped objects. The swivelling jaws always ensure even pressure. For easy positioning, all clamps are equipped with adjustable handles. - Ideal helper for constructing model buildings - Optimal for gripping, holding and clamping workpieces - Easy adjustment due to adjustable handles Set contains: - 3 large clamps, span length up to 38 mm - 6 small clamps, span length up to 25 mm
On order, shipped within 4-5 days
Laminating white fracture on plastic moulding parts - Paint, adhesives and other materials dry quickly - Easily shrinks heat-shrink tubing - Easy to handle and saves space due to compact design - With integrated stand - Heat-resistant gloves included - Includes EU mains plug and UK adapter - 230 V, 50 Hz, 300 W
On order, shipped within 4-5 days
Depending on the manufacture, plastic construction kit parts have minimal sheen, and are typically spray-painted in a solid colour. The patina set allows for lifelike and selective signs of weathering and aging to be applied. Industrial facilities or ones located at steam engine depots are always significantly more soiled than a family home in the countryside or a well-kept townhouse. The set contains 6 small bottles of matte pigments (black: 8 g, white: 6 g, rust: 8 g, moss: 7 g, sand: 5 g, verdigris: 6 g) which can be applied directly or mixed in countless shades using the enclosed speciality brushes. Ideal for patinating building models, bridge and steel constructions, railway material, as well as ship and military kits.
On order, shipped within 4-5 days
The sparks of a campfire dance softly over four dark blue tents. You immediately feel like grabbing one of them and going on a camping trip yourself.
On order, shipped within 4-5 days