New items 2027 · Roco
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of TX Logistik. Wagon made from die-cast metal Loaded with two lorry semi-trailers from the freight forwarder Stegagno With eight movable snap locks per trough Can be fitted with an upright or a folded shunting handle Authentic replica of the pivot joint The "T3000" megatrailer pocket wagon is a further development of the T2000 type. The loading area is designed to accommodate the low-slung vehicle parts of megatrailers. However, older trailer types, as well as swap bodies and containers up to 7.82 m in length, can also be loaded.
Pre-order, release expected in Q4 2027
Covered goods wagon, type Gklm, of the Deutsche Reichsbahn.
Pre-order, release expected in Q4 2027
Wagon set with two covered goods wagons of the Deutsche Bundesbahn. The set contains a maintenance wagon and a workshop wagon.
Pre-order, release expected in Q4 2027
Wagon set with three self-unloading hopper wagons, type Fals, of PKP Cargo.
Pre-order, release expected in Q3 2027
Four-axle articulated stanchion wagon, type Laaprs, of Rail Cargo Wagon. New design! Fine grab rails at wagon ends Detailed loading area Precisely reproduced stanchions Item No. 6600497: Modified running number
Pre-order, release expected in Q4 2027
Four-axle articulated stanchion wagon, type Laaprs,of Rail Cargo Wagon. New design! Fine grab rails at wagon ends Detailed loading area Precisely reproduced stanchions Item No. 6600496: Modified running number
Pre-order, release expected in Q4 2027
Container wagon, type Sgns, of Stadler Rail. Designed as a service and workshop wagon Loaded with two 20' containers Wagon made from die-cast metal Implemented as an approximate model based on the Sgns container wagon In Switzerland, Stadler Rail operates two pairs of such service wagons. The prototype are Sgs wagons, formerly operated by Albtal-Verkehrs-Gesellschaft. The wagons always operate in pairs and are intended to transport rolling stock, usually multiple units. Both wagons have a permanently mounted 6-foot container on the outside, ballasted with stones. In the prototype, one wagon in each pair also has an additional 12-foot accommodation container mounted on top for the accompanying staff. For the model, a set based on a Sgns wagon and inspired by the prototype has been created to complement the Stadler Re 465.
Pre-order, release expected in Q3 2027
Sliding-tarpaulin wagons, Shimms type, of the Spanish State Railways.
Pre-order, release expected in Q4 2027
Sliding-tarpaulin wagons, Shimms type, of the Spanish State Railways.
Pre-order, release expected in Q4 2027
Completely fitted with detail parts from the factory
Pre-order, release expected in Q4 2027
Sliding tarpaulin wagon “66 Years of ROCO”, type Shimmns. Intricate printing One-off edition
Pre-order, release expected in Q3 2027
Luggage van, type D, of the Deutsche Reichsbahn. With modified arrangement of the side windows and modified grab rails With steps below the loading compartment door Sliding doors can be fitted in three positions (closed, half-open, open) In digital mode with switchable interior lighting and tail light In the 1950s, Waggonbau Bautzen built a short goods train luggage van for the DR. More than 200 vans were procured in two production series. A distinctive feature of these vans was their built-in rear signals, whose red-and-white surfaces could be covered by rotating shutters. From 1964 onwards, the luggage vans were also used on branch lines in passenger trains. These coaches were lettered according to the passenger coach classification scheme, with the designation “D”.
Pre-order, release expected in Q2 2027
Guard's van for goods train, type Pwg, of the Deutsche Reichsbahn. With modified arrangement of the side windows and modified grab rails With steps below the loading compartment door Sliding doors can be fitted in three positions (closed, half-open, open) In digital mode with switchable interior lighting and tail light In the 1950s, Waggonbau Bautzen built a short goods train luggage van for the DR. More than 200 vans were procured in two production series. A distinctive feature of these vans was their built-in rear signals, whose red-and-white surfaces could be covered by rotating shutters.
Pre-order, release expected in Q2 2027
Guard's van, type Pwgs 88, of Mittelweserbahn. Look-out cabin with three windows With steps below the loading compartment door Sliding doors can be fitted in three positions (closed, half-open, open) In digital mode with switchable interior lighting and tail light
Pre-order, release expected in Q2 2027
Guard's van, type Pwgs 88, of DB Bahnbau. Look-out cabin with three windows With steps below the loading compartment door Sliding doors can be fitted in three positions (closed, half-open, open) In digital mode with switchable interior lighting and tail light
Pre-order, release expected in Q2 2027
Four-axle parcels and mail van, type Z-5, of the Swiss PTT (Post, Telephone and Telegraph Services). Vans from the first series Modern Post logo Open-grid walkway grilles Vans fitted with switchable red tail lights at both ends Electrical pick-up via pointed axle bearings AC version Typical Swiss vans built for the former PTT (now Swiss Post), with one series of 10 vans delivered in 1988 (571–580) and another in 1991 (581–590). Built by Josef Meyer Rheinfelden (JMR), they were delivered to the PTT with bogies supplied by SIG, similar to those used on the EW IV coaches.
Pre-order, release expected in Q3 2027
Wagon set with three 2-axle narrow-gauge goods wagons of the Deutsche Reichsbahn. The set contains an open goods wagon, type Ow, and two covered goods wagons, type Gw. A covered goods wagon with a brakeman's platform
Pre-order, release expected in Q1 2027
Wagon set with two 4-axle narrow-gauge stanchion wagons, type SSm/s, of the Austrian Federal Railways. Featuring lettering on the end walls
Pre-order, release expected in Q4 2027
Steam Locomotive 86 200 of the Deutsche Reichsbahn-Gesellschaft. Mold variant! Short-cut-out water tanks for the first time in a riveted design Fine metal wheelsets With running wheel brakes Authentic twin headlights Some signage is also included as etched parts From 1928 to 1943, almost all German locomotive factories delivered a total of 775 locomotives of this class to the Deutsche Reichsbahn-Gesellschaft. The 1000 hp locomotives were designed for a speed of 70-80 km/h, which meant they could also be used on main and feeder lines, in addition to their primary area of application, the "branch lines".
Pre-order, release expected in Q4 2027
Czechoslovak State Railways Class 477 steam locomotive. Special edition model! Variant! Available for the first time in a blue livery and as a variant featuring the large, distinctive water tanks Second-series version Particularly intricate pipework beneath the boiler Delicately crafted spoked wheels Parts of the model made from metal Highly detailed design of the driver’s cab Some signage additionally included as etched parts The CSD Class 477.0 represents the final and most technically advanced class of steam locomotive produced by the Czechoslovak State Railways (CSD). A total of 60 units were manufactured between 1951 and 1955 by CKD (CKD Sokolovo in Prague) and the class evolved from the preceding Class 476.1. The locomotives were designed as powerful express tender locomotives with a 2’D2’ wheel arrangement for heavy passenger service and, with a working weight of around 131 tonnes, were considered among the heaviest tender locomotives in Europe at the time. The three-cylinder locomotives reached a maximum speed of around 100 km/h and had a starting tractive effort of almost 110 kN. Visually, the 477.0 class was characterised by striking lines, featuring a streamlined firebox, Witte air deflectors and an elegant, usually colourful paint scheme with decorative stripes. This earned it the nickname ‘Papousek’ (parrot) in everyday service.
Pre-order, release expected in Q4 2027
Steam locomotive 24 058 of the Deutsche Bundesbahn. With Witte smoke deflectors Smoke box door without central lock Replica of the iconic locomotive 24 058 Some signage is also included as etched parts Back in our product range after a long time with small Witte wind deflectors Class 24 was designated in the standard locomotive type catalogue as a passenger train tender locomotive of the 1’ C h2 type with a 15 t axle load for service on branch lines. It was intended to be largely identical in construction to its ‘tender locomotive version’, Class 64. The two-cylinder superheated steam engine delivered 920 PSi. The locomotives, with a driving wheel diameter of 1,500 mm, were approved for a maximum speed of 90 km/h, allowing flexible deployment in passenger train service, including on main lines. After the Second World War, 47 locomotives remained in the Western zones. At the DB, 42 locomotives were returned to service; some were fitted with Witte smoke deflectors and remained in use until 1967.
Pre-order, release expected in Q4 2027
Steam locomotive 2253 of the United States Army Transportation Corps. Edition model! Attractive colour scheme Delicate plug-in parts Authentic design without a headlight Wheel sets with low-profile flanges A special piece of history for the home model railroad One-off edition in a special operating condition The S 160 "The Yank" or "Rattlesnake" were originally war locomotives of the United States Army Transportation Corps (USATC). These locomotives had to be deployable worldwide, so they conformed to the British loading gauge, which is one of the most restrictive on standard-gauge railways. A total of 2.120 units were manufactured, making this class one of the most widely built locomotive classes in the world. The name ‘Rattlesnake’ derives from the characteristic rattling sound of the controls.
Pre-order, release expected in Q1 2027
Steam locomotive Ty5-20 of the Polish State Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Version with additional colour accents Finely detailed model with many separately applied plug-in parts Metal driving and coupling rods Fine metal wheel sets
Pre-order, release expected in Q3 2027
Steam locomotive 64 1211 of the Deutsche Reichsbahn. Version with chassis in RAL 3011 Free-standing boiler pipework Fine metal wheel sets Front and rear wheel sets in various designs Based at Rbd Magdeburg, at Bw Stendal Some signage is also included as etched parts The Class 64 standard passenger tender locomotives were developed by the Deutsche Reichsbahn-Gesellschaft from 1926 onwards. As at 1 July 1950, exactly 129 locomotives were listed in the Deutsche Reichsbahn's maintenance fleet.
Pre-order, release expected in Q4 2027