New items 2027 · Roco
Steam locomotive 52.5995 of the Austrian Federal Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Variant with a well tank tender and round stack With fine metal-spoked wheels Drive and coupling rods made of precision-cast metal Z21 driver’s cab available Over 1,100 Class 52 locomotives were built at the locomotive factory in Vienna-Floridsdorf. After the war, 113 locomotives remained in Austria. Many were upgraded; for example, some well tank tenders were fitted with cabs, providing a driver’s compartment. The last units were withdrawn from service in 1976 and thus belonged to the final steam locomotives in operation on the standard-gauge network of the Austrian Federal Railways (ÖBB).
Pre-order, release expected in Q2 2027
Steam locomotive 64 415 of Veluwsche Stoomtrein Maatschappij (VSM). Version with welded water tanks Exposed pipes on the boiler Fine metal wheel sets Leading and trailing wheel sets with spoked wheels Some signage is also included as etched parts Parts on the cab and coal box are color-contrasted, just like on the large original The steam locomotive 64 415 belongs to the legendary German Class 64 series, which was specifically designed for branch lines. The tank locomotive was built in 1936 by the Arnold Jung Lokomotivfabrik in Kirchen (Sieg). With its 1’C1’ wheel arrangement and a top speed of 90 km/h, it was ideally suited to both passenger and light freight trains. After being taken out of service in 1974, the locomotive was initially preserved and, in 1976, acquired by the Dutch heritage railway Veluwsche Stoomtrein Maatschappij. Following a general overhaul, it was restored to operational condition in 1979 and has since been one of the key vehicles in the Beekbergen collection.
Pre-order, release expected in Q4 2027
Steam locomotive 24 040 of the Deutsche Reichsbahn-Gesellschaft. With Wagner smoke deflectors Smoke box door with central lock Some signage is also included as etched parts Class 24 was designated in the standard locomotive type catalogue as a passenger train tender locomotive of the 1’ C h2 type with a 15 t axle load for service on branch lines. It was intended to be largely identical in construction to its ‘tender locomotive version’, Class 64. The two-cylinder superheated steam engine delivered 920 PSi. The locomotives, with a driving wheel diameter of 1,500 mm, were approved for a maximum speed of 90 km/h, allowing flexible deployment in passenger train service, including on main lines.
Pre-order, release expected in Q4 2027
Steam locomotive 85 006 of the Deutsche Bundesbahn. Edition model! Model based on the early Era III design True to the prototype with two headlights With cross-compound air pump Fine metal wheel sets Leading and trailing wheels with nine spoked wheels Some signage is also included as etched parts In total, only 10 of these tender locomotives, each weighing around 133 tonnes, were built for operation on the so-called Höllentalbahn. The Class 85 locomotives were therefore the heaviest tender locomotives ever used in Germany. Thanks to their tractive effort, these stocky-looking tender locomotives quickly proved their worth on the mountain line.
Pre-order, release expected in Q2 2027
Steam locomotive 555.120 of the Czechoslovak State Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Design featuring a double-domed boiler and smoke deflectors Metal driving rods and coupling rods With fine metal wheel sets Some signage is also included as etched parts Some of the Class 50 locomotives were also manufactured in the occupied territories during the Second World War. The Škoda works in Pilsen played an important role in this, producing both standard Class 50 locomotives and locomotives in the ÜK version for the Deutsche Reichsbahn. After the end of the war, numerous German locomotives remained in the territory of the re-established Czechoslovakia. Twenty-eight locomotives were transferred to the ČSD fleet and classified as Class 555.1, with running numbers 555.101 to 555.128. These included locomotives built in Pilsen as well as several locomotives of the transitional wartime design.
Pre-order, release expected in Q3 2027
Steam locomotive TKh1-11 of the Polish State Railways. Fully articulated, intricate Allan control system Die-cast metal chassis
Pre-order, release expected in Q3 2027
Steam locomotive 33-503 of the Kreka coal mine. Power transmitted to two axles of the tender and via a cardan shaft to all five driving axles of the locomotive. Variant with a disc leading wheel With finely detailed metal spoked wheels Drive and coupling rods made of precision-cast metal Z21 driver's cab available In 2024, Kreka was one of the last operators of steam locomotives in Bosnia. Five Class 52 locomotives from the former DRB were still in service, transporting lignite from the mine to the Tuzla power station, the region's largest coal-fired power station. The Kreka coal mine is situated in the canton of Tuzla in Bosnia and Herzegovina. It has coal reserves of 1.12 billion tonnes of lignite, making it one of the largest in Europe and worldwide. Its annual production capacity is 2.95 million tonnes of coal.
Pre-order, release expected in Q4 2027
Steam locomotive 58 3005 of the Deutsche Reichsbahn. New design! Edition model! Boiler with bevelled smoke deflectors Delicately crafted spoked wheels Replica of the third inner cylinder with internal gear mechanism Coal tender type 2‘2‘T26 Based at Rbd Dresden; at Bw Glauchau Some signage is also included as etched parts The steam locomotive 58 3005 belonged to Class 58.30 of the Deutsche Reichsbahn and was thus one of the most distinctive rebuilt locomotives of the GDR. The class was based on the tried-and-tested five-axle coupled freight locomotives of the G 12 type. Between 1958 and 1962, the Deutsche Reichsbahn had a total of 56 locomotives extensively modernised at the Zwickau repair works. Among other things, they were fitted with a more powerful reconstruction boiler and given a significantly altered appearance. 58 3005 was initially based at Dresden-Friedrichstadt, among other places, before being transferred to the Glauchau depot in 1970. A distinctive feature of the locomotive was its 2’2’T26 tender, which it retained until the end of its service life.
Pre-order, release expected in Q4 2027
Steam locomotive 653 012 of the Italian State Railways. Period of service: 1918 to 1940 A particularly elegant design, also suitable for use on special services on many model railway layouts Freestanding pipework and many separately applied plug-in parts All-metal wheels with low flanges Z21 driver's cab available The FS Class 653 was a tender-type steam locomotive operated by the Italian State Railways, Ferrovie dello Stato (FS). The locomotives originally came from the Austrian Südbahn (SB) as Class 109 and were transferred to Italy after the First World War as part of reparations. In total, the FS took over 13 locomotives, which were assigned the numbers 653.001–653.013. With FS, the locomotives were mainly in service in the Trieste and Udine areas. Due to their small numbers, they remained a marginal presence in the Italian locomotive fleet. They were withdrawn from service between 1939 and 1940.
Pre-order, release expected in Q2 2027
Steam locomotive 86 200 of the Deutsche Reichsbahn-Gesellschaft. Mold variant! Short-cut-out water tanks for the first time in a riveted design Fine metal wheelsets With running wheel brakes Authentic twin headlights Some signage is also included as etched parts Driver’s cab lighting switchable in digital operation From 1928 to 1943, almost all German locomotive factories delivered a total of 775 locomotives of this class to the Deutsche Reichsbahn-Gesellschaft. The 1000 hp locomotives were designed for a speed of 70-80 km/h, which meant they could also be used on main and feeder lines, in addition to their primary area of application, the "branch lines".
Pre-order, release expected in Q4 2027
Class 477 steam locomotive of the Czechoslovak State Railways. Edition model! Mold variant! Available for the first time in a blue livery and as a mold variant featuring the large, distinctive water tanks Second-series version Particularly intricate pipework beneath the boiler Delicately crafted spoked wheels Parts of the model made from metal Highly detailed design of the driver’s cab Some signage additionally included as etched parts In digital operation with switchable driver’s cab and engine lighting With dynamic steam for an authentic steam discharge from the chimney The CSD Class 477.0 represents the final and most technically advanced class of steam locomotive produced by the Czechoslovak State Railways (CSD). A total of 60 units were manufactured between 1951 and 1955 by CKD (CKD Sokolovo in Prague) and the class evolved from the preceding Class 476.1. The locomotives were designed as powerful express tender locomotives with a 2’D2’ wheel arrangement for heavy passenger service and, with a working weight of around 131 tonnes, were considered among the heaviest tender locomotives in Europe at the time. The three-cylinder locomotives reached a maximum speed of around 100 km/h and had a starting tractive effort of almost 110 kN. Visually, the 477.0 class was characterised by striking lines, featuring a streamlined firebox, Witte air deflectors and an elegant, usually colourful paint scheme with decorative stripes. This earned it the nickname ‘Papousek’ (parrot) in everyday service.
Pre-order, release expected in Q4 2027
Steam locomotive 24 058 of the Deutsche Bundesbahn. With Witte smoke deflectors Smoke box door without central lock Replica of the iconic locomotive 24 058 Some signage is also included as etched parts Back in our product range after a long time with small Witte wind deflectors With authentic sound functions Class 24 was designated in the standard locomotive type catalogue as a passenger train tender locomotive of the 1’ C h2 type with a 15 t axle load for service on branch lines. It was intended to be largely identical in construction to its ‘tender locomotive version’, Class 64. The two-cylinder superheated steam engine delivered 920 PSi. The locomotives, with a driving wheel diameter of 1,500 mm, were approved for a maximum speed of 90 km/h, allowing flexible deployment in passenger train service, including on main lines. After the Second World War, 47 locomotives remained in the Western zones. At the DB, 42 locomotives were returned to service; some were fitted with Witte smoke deflectors and remained in use until 1967.
Pre-order, release expected in Q4 2027
Steam locomotive 2253 of the United States Army Transportation Corps. Edition model! Attractive colour scheme Delicate plug-in parts Authentic design without a headlight Wheel sets with low-profile flanges A special piece of history for the home model railroad One-off edition in a special operating condition The S 160 "The Yank" or "Rattlesnake" were originally war locomotives of the United States Army Transportation Corps (USATC). These locomotives had to be deployable worldwide, so they conformed to the British loading gauge, which is one of the most restrictive on standard-gauge railways. A total of 2.120 units were manufactured, making this class one of the most widely built locomotive classes in the world. The name ‘Rattlesnake’ derives from the characteristic rattling sound of the controls.
Pre-order, release expected in Q1 2027
Steam locomotive Ty5-20 of the Polish State Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Version with additional colour accents Finely detailed model with many separately applied plug-in parts Metal driving and coupling rods Fine metal wheel sets
Pre-order, release expected in Q3 2027
Steam locomotive 64 1211 of the Deutsche Reichsbahn. Version with chassis in RAL 3011 Free-standing boiler pipework Fine metal wheel sets Front and rear wheel sets in various designs Based at Rbd Magdeburg, at Bw Stendal Some signage is also included as etched parts The Class 64 standardised passenger tender locomotives were developed by the Deutsche Reichsbahn-Gesellschaft from 1926 onwards. As at 1 July 1950, the Deutsche Reichsbahn (DR) had exactly 129 locomotives listed in its operational fleet.
Pre-order, release expected in Q4 2027
Steam locomotive 52.5995 of the Austrian Federal Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Variant with a well tank tender and round stack With fine metal-spoked wheels Drive and coupling rods made of precision-cast metal Z21 driver’s cab available Over 1,100 Class 52 locomotives were built at the locomotive factory in Vienna-Floridsdorf. After the war, 113 locomotives remained in Austria. Many were upgraded; for example, some well tank tenders were fitted with cabs, providing a driver’s compartment. The last units were withdrawn from service in 1976 and thus belonged to the final steam locomotives in operation on the standard-gauge network of the Austrian Federal Railways (ÖBB).
Pre-order, release expected in Q2 2027
Steam locomotive 64 415 of the Veluwsche Stoomtrein Maatschappij (VSM). Version with welded water tanks Exposed pipes on the boiler Fine metal wheel sets Leading and trailing wheel sets with spoked wheels Some signage is also included as etched parts Parts on the cab and coal box are color-contrasted, just like on the large original The steam locomotive 64 415 belongs to the legendary German Class 64 series, which was specifically designed for branch lines. The tank locomotive was built in 1936 by the Arnold Jung Lokomotivfabrik in Kirchen (Sieg). With its 1’C1’ wheel arrangement and a top speed of 90 km/h, it was ideally suited to both passenger and light freight trains. After being taken out of service in 1974, the locomotive was initially preserved and, in 1976, acquired by the Dutch heritage railway Veluwsche Stoomtrein Maatschappij. Following a general overhaul, it was restored to operational condition in 1979 and has since been one of the key vehicles in the Beekbergen collection.
Pre-order, release expected in Q4 2027
Steam locomotive 24 040 of the Deutsche Reichsbahn-Gesellschaft. With Wagner smoke deflectors Smoke box door with central lock Some signage is also included as etched parts With authentic sound functions Class 24 was designated in the standard locomotive type catalogue as a passenger train tender locomotive of the 1’ C h2 type with a 15 t axle load for service on branch lines. It was intended to be largely identical in construction to its ‘tender locomotive version’, Class 64. The two-cylinder superheated steam engine delivered 920 PSi. The locomotives, with a driving wheel diameter of 1,500 mm, were approved for a maximum speed of 90 km/h, allowing flexible deployment in passenger train service, including on main lines.
Pre-order, release expected in Q4 2027
Steam locomotive 85 006 of the Deutsche Bundesbahn. Edition model! Model based on the early Era III design True to the prototype with two headlights With cross-compound air pump Fine metal wheel sets Leading and trailing wheels with nine spoked wheels Some signage is also included as etched parts In digital mode with a switchable red tail light on the tender side In total, only 10 of these tender locomotives, each weighing around 133 tonnes, were built for operation on the so-called Höllentalbahn. The Class 85 locomotives were therefore the heaviest tender locomotives ever used in Germany. Thanks to their tractive effort, these stocky-looking tender locomotives quickly proved their worth on the mountain line.
Pre-order, release expected in Q2 2027
Steam locomotive 555.120 of the Czechoslovak State Railways. Drive on two axles of the tender and via cardan shaft to all five driving axles of the locomotive. Design featuring a double-domed boiler and air deflectors Metal driving rods and coupling rods With fine metal wheel sets Some signage is also included as etched parts Some of the Class 50 locomotives were also manufactured in the occupied territories during the Second World War. The Škoda works in Pilsen played an important role in this, producing both standard Class 50 locomotives and locomotives in the ÜK version for the Deutsche Reichsbahn. After the end of the war, numerous German locomotives remained in the territory of the re-established Czechoslovakia. Twenty-eight locomotives were transferred to the ČSD fleet and classified as Class 555.1, with running numbers 555.101 to 555.128. These included locomotives built in Pilsen as well as several locomotives of the transitional wartime design.
Pre-order, release expected in Q3 2027
Steam locomotive TKh1-11 of the Polish State Railways. Fully articulated, finely detailed Allan valve gear Die-cast metal chassis
Pre-order, release expected in Q3 2027
Steam locomotive 33-503 of the Kreka coal mine. Power transmitted to two axles of the tender and via a cardan shaft to all five driving axles of the locomotive. Variant with a disc leading wheel With finely detailed metal spoked wheels Drive and coupling rods made of precision-cast metal Z21 driver's cab available In 2024, Kreka was one of the last operators of steam locomotives in Bosnia. Five Class 52 locomotives from the former DRB were still in service, transporting lignite from the mine to the Tuzla power station, the region's largest coal-fired power station. The Kreka coal mine is situated in the canton of Tuzla in Bosnia and Herzegovina. It has coal reserves of 1.12 billion tonnes of lignite, making it one of the largest in Europe and worldwide. Its annual production capacity is 2.95 million tonnes of coal.
Pre-order, release expected in Q4 2027
Steam locomotive 58 3005 of the Deutsche Reichsbahn. New design! Edition model! Boiler with bevelled smoke deflectors Delicately crafted spoked wheels Replica of the third inner cylinder with internal gear mechanism Coal tender, type 2‘2‘T26 Based at Rbd Dresden; at Bw Glauchau Some signage is also included as etched parts Switchable driver’s cab and valve gear lighting, as well as a flickering firebox in digital mode With dynamic steam for authentic steam emission from the chimney The steam locomotive 58 3005 belonged to Class 58.30 of the Deutsche Reichsbahn and was thus one of the most distinctive rebuilt locomotives of the GDR. The class was based on the tried-and-tested five-axle coupled freight locomotives of the G 12 type. Between 1958 and 1962, the Deutsche Reichsbahn had a total of 56 locomotives extensively modernised at the Zwickau repair works. Among other things, they were fitted with a more powerful reconstruction boiler and given a significantly altered appearance. 58 3005 was initially based at Dresden-Friedrichstadt, among other places, before being transferred to the Glauchau depot in 1970. A distinctive feature of the locomotive was its 2’2’T26 tender, which it retained until the end of its service life.
Pre-order, release expected in Q4 2027
Steam locomotive 653 012 of the Italian State Railways. Period of service: 1918 to 1940 Freestanding pipework and many separately applied plug-in parts All-metal wheels with low flanges Z21 driver's cab available The FS Class 653 was a tender-type steam locomotive operated by the Italian State Railways, Ferrovie dello Stato (FS). The locomotives originally came from the Austrian Südbahn (SB) as Class 109 and were transferred to Italy after the First World War as part of reparations. In total, the FS took over 13 locomotives, which were assigned the numbers 653.001–653.013. With FS, the locomotives were mainly in service in the Trieste and Udine areas. Due to their small numbers, they remained a marginal presence in the Italian locomotive fleet. They were withdrawn from service between 1939 and 1940.
Pre-order, release expected in Q2 2027