Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track

Track, points, signals and accessories for a reliable layout.
Filter products
12% off the recommended price
Track R3, 7,5°
Roco 61130 Scale H0
Track R3, 7,5°

Curved track R3. Radius 434.5 mm, arc angle 7.5°. Short compensation piece for the use of the geoLine tracks on NOCH layouts.

Selling price: CHF 3.40 RRP CHF 3.90

In stock, shipped within 1-3 days

11% off the recommended price
Set: sleepers end pieces
Roco 61183 Scale H0
Set: sleepers end pieces

Set of sleeper end pieces for flex track 61106. Used to equalise differences in length of the flex track 61106. Content: 6 end pieces, 12 rail joiners, 1 universal tool.

Selling price: CHF 12.90 RRP CHF 14.60

In stock, shipped within 1-3 days

Small fittings
TILLIG 85530 Scale H0
Small fittings

Small trackwork "K" (bag of 20 pieces)

Selling price: CHF 3.00 RRP CHF 3.30

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 112.6 mm / 4-7/16"
Trix 14500 Scale N
Minitrix Straight Track with Concrete Ties Length 112.6 mm / 4-7/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 112.6 mm. This corresponds to the length of the 14538 and 14539 points. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Flex Track with Concrete Ties Length 730 mm / 28-3/4"
Trix 14501 Scale N
Minitrix Flex Track with Concrete Ties Length 730 mm / 28-3/4"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 730 mm = 7 x 14504. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 730 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 6.55 RRP CHF 7.69

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Straight Track with Concrete Ties Length 312.6 mm / 12-5/16"
Trix 14502 Scale N
Minitrix Straight Track with Concrete Ties Length 312.6 mm / 12-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 312.6 mm = 3 x 14504. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 312.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 4.55 RRP CHF 5.29

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 17.5 mm / 11/16"
Trix 14503 Scale N
Minitrix Straight Track with Concrete Ties Length 17.5 mm / 11/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 17.5 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 17.5 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 104.2 mm / 4-1/8"
Trix 14504 Scale N
Minitrix Straight Track with Concrete Ties Length 104.2 mm / 4-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 104.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 76.3 mm / 3"
Trix 14505 Scale N
Minitrix Straight Track with Concrete Ties Length 76.3 mm / 3"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 76.3 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 76.3 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 54.2 mm / 2-1/8"
Trix 14506 Scale N
Minitrix Straight Track with Concrete Ties Length 54.2 mm / 2-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 54.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 54.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 50.0 mm / 2"
Trix 14507 Scale N
Minitrix Straight Track with Concrete Ties Length 50.0 mm / 2"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 50.0 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 50.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 27.9 mm / 1-1/8"
Trix 14508 Scale N
Minitrix Straight Track with Concrete Ties Length 27.9 mm / 1-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 27.9 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 27.9 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Straight Track with Concrete Ties Length 33.6 mm / 1-5/16"
Trix 14509 Scale N
Minitrix Straight Track with Concrete Ties Length 33.6 mm / 1-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model 33.6 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a straight track with concrete sleepers 33.6 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.30 RRP CHF 2.69

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14510 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model R 2a (261.8 mm) - 30°. Circle = 12 pieces of track. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix track has solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. Various track extension sets with the item nos. 14311 and 14312 are also available for expanding your layout easily. This makes parallel circuits, passing loops and sidings easy to build. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks in a grey concrete sleeper look have solid-profile rails of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14511 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2a (261.8 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"
Trix 14513 Scale N
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 3 (329.0 mm) - 7.5°. 2 tracks = 14517. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 329.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/8"
Trix 14514 Scale N
Minitrix Curved Track with Concrete Ties Radius 362.6 mm / 14-1/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 4 (362.6 mm) - 7.5°. 2 tracks = 14527. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 362.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"
Trix 14515 Scale N
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 5 (492.6 mm) - 7.5°. 2 tracks = 14518. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 492.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-3/4"
Trix 14516 Scale N
Minitrix Curved Track with Concrete Ties Radius 526.2 mm / 20-3/4"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 6 (526.2 mm) - 7.5°. 2 tracks = 14528. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 526.2 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"
Trix 14517 Scale N
Minitrix Curved Track with Concrete Ties Radius 329.0 mm / 12-15/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 3 (329.0 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 329.0 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"
Trix 14518 Scale N
Minitrix Curved Track with Concrete Ties Radius 492.6 mm / 19-3/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 5 (492.6 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 492.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"
Trix 14519 Scale N
Minitrix Curved Track with Concrete Ties Radius 261.8 mm / 10-5/16"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2a (261.8 mm) - 7.5°. 2 tracks = 14511. 4 tracks = 14510. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 261.8 mm The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.40 RRP CHF 2.79

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"
Trix 14520 Scale N
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2b (295.4 mm) - 30°. Circle = 12 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 295.4 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.75 RRP CHF 3.19

In stock, shipped within 1-3 days

13% off the recommended price
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"
Trix 14521 Scale N
Minitrix Curved Track with Concrete Ties Radius 295.4 mm / 11-5/8"

Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model R 2b (295.4 mm) - 15°. Circle = 24 tracks. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a curved track with concrete sleepers 295.4 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The tracks with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel The spacing between the centres of two tracks is 33.6 millimetres

Selling price: CHF 2.50 RRP CHF 2.89

In stock, shipped within 1-3 days