Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track

Track, points, signals and accessories for a reliable layout.
Filter products
14% off the recommended price
Trix H0 Right Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)
Trix 62612 Scale H0
Trix H0 Right Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)

Prototype The Trix H0 right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand point with a length of 188.3 mm / arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted

Selling price: CHF 22.95 RRP CHF 26.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Right Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"
Trix 62712 Scale H0
Trix H0 Right Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"

Prototype The Trix H0 slim right-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim right-hand point with a length of 236.1 mm / diverging track radius of 1114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. With a length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 38.25 RRP CHF 44.99

In stock, shipped within 1-3 days

H0m flexible track, 1000 mm, pack of 20
BEMO 4280000 Scale H0m
H0m flexible track, 1000 mm, pack of 20

H0m flexible track, length 1000 mm. Supplied in a pack of 20.

Regular price: CHF 11.65

In stock, shipped within 1-3 days

13% off the recommended price
Flex.rack-and pinion tr., 222 mm
Fleischmann 9119 Scale N
Flex.rack-and pinion tr., 222 mm

Flexible rack track, length 222 mm. This track can be curved to the desired radius, even down to the minimum radius (9120) The rack section always remains the same length, although the rail section will need to be trimmed to length accordingly. The rails can be joined using the rail joiners 9403 or 9404.

Selling price: CHF 8.60 RRP CHF 9.90

In stock, shipped within 1-3 days

14% off the recommended price
LGB Straight Track 600 mm
LGB 10600 Scale G
LGB Straight Track 600 mm

Prototype With LGB garden railway tracks, you can bring more dynamism to your layout with ease. Simply plug them together and you are ready to go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long-term outdoor use! Model The 600 mm long straight track is twice as long as the LGB 10000 straight track. Highlights Extremely robust tracks that withstand being stepped on Plastic sleepers with prototypical wood grain

Selling price: CHF 16.60 RRP CHF 19.49

In stock, shipped within 1-3 days

Märklin Start up - Uncoupling track
Märklin
Märklin Start up - Uncoupling track

94.2 mm. Contents: 1 piece. A section of track suitable for manual and electrical uncoupling. Electrical operation is only possible in conjunction with the 72752 control panel and the supplied cable.

Regular price: CHF 30.70

In stock, shipped within 1-3 days

10% off the recommended price
Märklin Curved Circuit Track C Track Radius R1 = 360 mm / 14-3/16" / 15°
Märklin 24194 Scale H0
Märklin Curved Circuit Track C Track Radius R1 = 360 mm / 14-3/16" / 15°

Prototype The Märklin C track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, using special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin curved circuit track (C track) with a radius R1 of 360 mm / 15°. The click connection with the "Click". Set up and taken down in no time. Stable and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliable centre conductor operation and the common return on the two rails are always retained, allowing great track routes without complicated wiring (e.g. for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track therefore looks as if it were made from a single length, just like the prototype. Special fishplates are not needed. Invisible strength: Thanks to this stable click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can therefore be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of space for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setting up and taking down thanks to the stable click connection, even on the carpet All Märklin H0 models work on the C track A transition from Märklin M track to C track can be made with item 24951 A transition from Märklin K track to C track can be made with item 24922

Selling price: CHF 17.90 RRP CHF 19.99

In stock, shipped within 1-3 days

13% off the recommended price
Märklin Left Hand Wide Radius Turnout Length 236.1 mm / 9-5/16"
Märklin 24711 Scale H0
Märklin Left Hand Wide Radius Turnout Length 236.1 mm / 9-5/16"

Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin slim left point with a length of 236.1 mm. Branch track radius 1114.6 mm. Point curve 12.1°. Common crossing 10° made of metal. Two 24071 tracks are required at the end of the point; a matching ballast base piece is included. With a manual control lever. The 74491 electric point motor, the 74470/74471 point lanterns and the 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet

Selling price: CHF 38.90 RRP CHF 44.99

In stock, shipped within 1-3 days

10% off the recommended price
Märklin Straight Circuit Track Length 94.2 mm / 3-11/16"
Märklin 24994 Scale H0
Märklin Straight Circuit Track Length 94.2 mm / 3-11/16"

Prototype The Märklin circuit track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin straight circuit track with a length of 94.2 mm. Momentary contact by means of the pickup shoe on vehicles. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet

Selling price: CHF 17.90 RRP CHF 19.99

In stock, shipped within 1-3 days

14% off the recommended price
Tower Mast
Märklin 8914 Scale Z
Tower Mast

With recesses for hooking in the cross connections 8924 and 8925. Base 7 x 13 mm. Height 61 mm.

Selling price: CHF 6.20 RRP CHF 7.29

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Right Turnout Length 112.6 mm / 4-7/16"
Trix 14955 Scale N
Minitrix Right Turnout Length 112.6 mm / 4-7/16"

Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix right-hand point 15°. For particularly slim point formations. Straight track 112.6 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 25.50 RRP CHF 29.99

In stock, shipped within 1-3 days

14% off the recommended price
Minitrix Track Bumper Length 50.0 mm / 2"
Trix 14976 Scale N
Minitrix Track Bumper Length 50.0 mm / 2"

Prototype The Minitrix buffer stop combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix buffer stop with a length of 50.0 mm (in vintage version). The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 6.80 RRP CHF 7.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Left Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)
Trix 62611 Scale H0
Trix H0 Left Turnout Length 188.3 mm / 7-3/8" / Curve 24.3° / Radius 437.5 mm / 17-1/4" (R2)

Prototype The Trix H0 left-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand point with a length of 188.3 mm / arc of 24.3° / radius of 437.5 mm (R2). With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted Quick assembly and dismantling

Selling price: CHF 22.95 RRP CHF 26.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Left Curved Turnout Radius 360 mm / 14-3/16" (R1)
Trix 62671 Scale H0
Trix H0 Left Curved Turnout Radius 360 mm / 14-3/16" (R1)

Prototype The Trix H0 left-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand curved point with an inner curve of 30° / radius of 360 mm (R1). Outer curve 30° at a parallel circle spacing of 77.5 mm. With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted

Selling price: CHF 24.65 RRP CHF 28.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Right Curved Turnout Radius 360 mm / 14-3/16" (R1)
Trix 62672 Scale H0
Trix H0 Right Curved Turnout Radius 360 mm / 14-3/16" (R1)

Prototype The Trix H0 right-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand curved point with an inner curve of 30° / radius of 360 mm (R1). Outer curve 30° at a parallel circle spacing of 77.5 mm. With a manual control lever. Electric drive, point lanterns or point decoder can be retrofitted. A length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Ingenious point geometry: installation in all positions Compensation: no differing part-track combinations Grid: length of the point combinations 360 mm Trailing permitted: sprung metal point blades Hands off: electric drive can be retrofitted Indication follows: LED point lanterns can be retrofitted Good contact: metal common crossing can be polarised Digital technology: point decoder can be retrofitted Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 24.65 RRP CHF 28.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Left Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"
Trix 62711 Scale H0
Trix H0 Left Wide Radius Turnout Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8"

Prototype The Trix H0 slim left-hand point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 slim left-hand point with a length of 236.1 mm / diverging track radius of 1,114.6 mm. Point curve 12.1°. Polarisable 10° common crossing made of metal. 2 tracks 62071 are required at the end of the point, a matching ballast section is included. With a manual control lever. The 74491 electric drive, 74470/74471 point lantern and 74462 digital decoder can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 38.25 RRP CHF 44.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Left Curved Turnout Radius 515 mm / 20-1/4" / 30°
Trix 62771 Scale H0
Trix H0 Left Curved Turnout Radius 515 mm / 20-1/4" / 30°

Prototype The Trix H0 left-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 left-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance with ballast, sleepers and metal rails Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 46.75 RRP CHF 54.99

In stock, shipped within 1-3 days

14% off the recommended price
Trix H0 Right Curved Turnout Radius 515 mm / 20-1/4" / 30°
Trix 62772 Scale H0
Trix H0 Right Curved Turnout Radius 515 mm / 20-1/4" / 30°

Prototype The Trix H0 right-hand curved point combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix H0 right-hand curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circle spacing of 64 mm. With a manual control lever. 2 tracks 62315 are required in the inner curve of the point, a matching ballast section is included. Metal common crossing can be polarised. The 74491 electric drive, 74462 digital decoder and 74470/74471 point lanterns can be retrofitted. Length of 64.3 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Prototypical appearance. Electrical operating reliability. Quick assembly and dismantling thanks to the stable click connection, even on a carpet

Selling price: CHF 46.75 RRP CHF 54.99

In stock, shipped within 1-3 days

H0m curved track, R 515 mm, 12°, pack of 10
BEMO 4275000 Scale H0m
H0m curved track, R 515 mm, 12°, pack of 10

H0m curved track, radius 515 mm, 12° angle. Pack of 10.

Regular price: CHF 4.65

In stock, shipped within 1-3 days

H0m connecting track, 162.3 mm, with terminal wires
BEMO 4283000 Scale H0m
H0m connecting track, 162.3 mm, with terminal wires

H0m connecting track with terminal wires, length 162.3 mm.

Regular price: CHF 8.00

In stock, shipped within 1-3 days

14% off the recommended price
LGB Straight Track 150 mm
LGB 10150 Scale G
LGB Straight Track 150 mm

Prototype With LGB garden railway tracks, you can easily bring more dynamism to your layout. Simply plug them together and off you go. LGB tracks are made of brass and are therefore very robust and weatherproof. Nothing stands in the way of long outdoor use! Model The 150 mm long straight track is an important part of the LGB track assortment. It is ideally suited for closing gaps in the track or varying track lengths. Solid brass rails are used for all LGB tracks in order to guarantee reliable operation indoors and outdoors. Highlights Extremely robust tracks that can withstand being stepped on Plastic sleepers with wood graining faithful to the original

Selling price: CHF 6.80 RRP CHF 7.99

In stock, shipped within 1-3 days

SBB - Dwarf signal with 3 LEDs (White/White+White)
Mafen 914601 Scale H0
SBB - Dwarf signal with 3 LEDs (White/White+White)

SBB dwarf signal in H0 scale. The black trapezoidal head carries three lenses, one at the upper left and two below; the glasses are clear and unlit in the photograph. The head is carried on a short bare-metal post pierced with a row of holes. The base is light grey and pyramid-shaped.

Regular price: CHF 36.90

In stock, shipped within 1-3 days

14% off the recommended price
Straight Uncoupler Track Length 90 mm / 3-9/16"
Märklin 2297 Scale H0
Straight Uncoupler Track Length 90 mm / 3-9/16"

Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model With an electromagnetic mechanism. Length 1/2 = 90 mm. 2 connection cables. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung track planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Reliable electrical operation thanks to the proven centre conductor For anyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track

Selling price: CHF 30.90 RRP CHF 35.99

In stock, shipped within 1-3 days

13% off the recommended price
Supplemental Feeder Wire Set
Märklin 74042 Scale H0
Supplemental Feeder Wire Set

Red and brown connecting cable with flat plugs for C tracks at both ends. Length 2 m.

Selling price: CHF 6.80 RRP CHF 7.89

In stock, shipped within 1-3 days