Track
Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030.
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout right hand Wr10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42493
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Previous item no: 42497
In stock: 2 on the shelf, shipped within 1-3 days
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation.
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K30. Length of tracks 119 mm (= DG1). Crossing angle 30°. The railroad lines that cross each other are not electrically isolated. Among other things they are suitable for forming double track connections with the 15° turnouts or double slip turnouts.
In stock: 2 on the shelf, shipped within 1-3 days
Universal bedding switch drive. Low switching current consumption, limit switch. Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of the drive is held in its end position by the tongue adjustment mechanism of the switch itself (and only then will the limit switch function reliably), please do not try out the switch drive unless it is clip-connected to a switch.
In stock: 2 on the shelf, shipped within 1-3 days
Embankment end piece. These end pieces provide a neat closure of the roadbed at buffer stops, display cases, etc. The package contains 6 pieces.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete tie track is now standard throughout Europe – and that should also apply to model railroads. N gauge is now getting concrete tie track with an NEM-compliant Code 60 rail profile. The track system can be expanded as desired. The ideal track system for beginners and pros. Model Minitrix crossing with a length of 104.2 mm / 4-1/8". The length corresponds to a 14904 Minitrix straight track. Highlights Minitrix solid profile rails with a rail profile to NEM Code 60 Solid profile rails made of a rust-free special alloy Material and track profile provide reliable contact for current transmission to the wheels
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix uncoupler track with a length of 76.3 mm. Locomotives and wagons can be uncoupled by remote control with it. The electromagnetic drive is operated with the Märklin 72710 or 72720 control panel. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model The 15° crossing is designed so that the two intersecting tracks are completely electrically isolated from each other. This crossing can therefore be used as desired, including on loop lines and on intersecting lines with separate circuits. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix left-hand point 15° with a polarised common crossing. Straight track 112.6 mm. The click connection with the "Click". Set up and taken down in next to no time. Stable and durable. Curve radius = R 4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down Note The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, right-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix point 15°. For particularly slim point formations. Straight track 112.6 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curve radius = R4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Minitrix curved point, right-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix system: combining the Minitrix track systems with one another is possible at any time thanks to transition tracks. Perfect connection: the mechanical and electrical connection between two tracks is not visible from the outside. The line thereby looks as though made from a single length, just as on the prototype. Special fishplates are not needed. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the track down. It can thus be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for the installation of electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with ballast, sleepers and metal rails Quick assembly and dismantling thanks to the stable click connection, even on carpet Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix straight track with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 4 -15° + 2 x 14903. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Minitrix crossing combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 104.2 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. Curved track = R 1 - 30°. Removable drive with mechanism for the point lantern and end shut-off. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The 15° crossing is designed so that the two crossing tracks are completely isolated from each other electrically. This crossing can therefore be used as desired, including on loop lines and on crossing lines with separate circuits. Model Minitrix crossing with a length of 129.8 mm. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 2 on the shelf, shipped within 1-3 days
Curved points R3/R4. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and a curve angle of 30° can be taken into account. The track layout is therefore considerably slimmer. Nevertheless, the space required is still not too great, even for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix straight H0 transition track with a length of 180 mm. The click connection with the "Click". Assembled and dismantled in no time. Stable and durable. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights Prototypical appearance. Electrical operating reliability Quick assembly and dismantling thanks to the stable click connection, even on carpet Note *FLEISCHMANN is a brand of Modelleisenbahn München GmbH.
In stock: 2 on the shelf, shipped within 1-3 days