Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track

Track, points, signals and accessories for a reliable layout.
Filter products
13% off the recommended price
Double slip turnout DKW15
Roco 42452 Scale H0
Double slip turnout DKW15

Double slip turnout DKW15, without turnout mechanisms. Design “Baeseler” with closure blades located at the outside. Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm. For diagonal installation two D4 and one D 12 are included. Owing to the geometrical characteristics of this type of double slip turnout it is necessary to always use it polarized. Suitable turnout mechanisms (2 pieces are required): 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!

Selling price: CHF 48.90 RRP CHF 56.40

In stock: 1 on the shelf, shipped within 1-3 days

Rocoline curved turnout right R5 30°
Roco Scale H0
Rocoline curved turnout right R5 30°

Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!

Regular price: CHF 32.90

In stock: 1 on the shelf, shipped within 1-3 days

Curved point left BWl9/10
Roco Scale H0
Curved point left BWl9/10

Curved point, left, BWl9/10, unpowered. The radius of the main track and the turnout track is 826.4 mm (R9), with a curve angle of 30°. Compatible point motors: 40295 or 40296 (electric point motor), 40297 or 40298 (hand-operated point motor), or 10030 (below-baseboard point motor). Please note the operating instructions!

Regular price: CHF 41.90

In stock: 1 on the shelf, shipped within 1-3 days

Rocoline curved turnout right R9 30°
Roco Scale H0
Rocoline curved turnout right R9 30°

Curved turnout right hand BWr9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!

Regular price: CHF 41.90

In stock: 1 on the shelf, shipped within 1-3 days

Rocoline right turnout 345 mm 10°
Roco Scale H0
Rocoline right turnout 345 mm 10°

Turnout right hand Wr10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030.

Regular price: CHF 30.90

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Track straight, G1/2, 115mm
Roco 42512 Scale H0
Track straight, G1/2, 115mm

Straight track G½ with bedding. Length 115 mm (half standard length).

Selling price: CHF 3.10 RRP CHF 3.60

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Junction joiner
Roco 42612 Scale H0
Junction joiner

Transition rail joiners. For rail systems with a 2.5-mm rail profile on the ROCO LINE track. Perfect for connecting FLEISCHMANN PROFI track to ROCO LINE track. Content: 24 pieces/pack.

Selling price: CHF 6.00 RRP CHF 6.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Turntable 22m, Roco Line
Roco 42615 Scale H0
Turntable 22m, Roco Line

Turntable with electric below-baseboard propulsion mechanism and control unit. Suitable for all NEM (European model railway standard) compatible two-rail DC and three-rail AC model railways. Bridge length: 253 mm; this is equivalent to 22 m on an original railway. The minimum angle between two track connections is 9 degrees. Spacers for 1°, 3°, 6° and 9° divisions are supplied with the turntable. This means that any division from 9° upwards in 1° stages between the track connections is feasible. The maximum number of track connections that can be made is 40. Four track connections for two-rail DC operation are supplied with the turntable. Further track connections are available as accessories (42616). If the turntable is to be used with a three-rail AC model railway, your specialist dealer will exchange the enclosed original DC pack to a pack of three-rail AC track connections (42617). The turntable bridge drive is powered by 14 V AC. Depending on the system used, traction power supply will either be DC or AC. The turntable is equipped with a control unit for preselecting the direction of rotation and starting the turntable rotation. When you let go of the turntable switch, the turntable halts exactly at the next track connection. Just like on a real-life turntable, it is also possible to choose between two rotation speeds. Traction power is fed in via the turntable. The traction voltage of the track connections can be assigned via the control unit. This prevents a locomotive that is currently parked from inadvertently moving off if two track connections are located directly opposite to one another.* One 1-meter 5-pole cable (connection between transformer and control unit) and one 2-meter 8-pole cable (connection between control unit with the turntable) are enclosed. Installation dimensions: Required installation opening: 280 mm. Installation depth measured from table top edge: 50 mm. External diameter of the turntable without track connections: 307 mm. Turntable bridge length: 253 mm. Suitable for all locomotives up to a total wheel base of 250 mm. * A terminal loop module is required when using the turntable in DCC mode (digital).

Selling price: CHF 389.00 RRP CHF 446.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Track straight, G76
Roco 61112 Scale H0
Track straight, G76

Adapter straight track G76.5. Length 76.5 mm.

Selling price: CHF 2.70 RRP CHF 3.10

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Curved turnout left, R3-4
Roco 61154 Scale H0
Curved turnout left, R3-4

Curved turnout left hand R3/4, manually operated. Radius of the main track and the branch line 434.5 mm, arc angle 30°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarization of the turnout frog is prepared.

Selling price: CHF 34.90 RRP CHF 39.80

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Curved turnout right, R3-4
Roco 61155 Scale H0
Curved turnout right, R3-4

Curved turnout right hand R3/4, manually operated. Radius of the main track and the branch line 434.5 mm, arc angle 30°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarization of the turnout frog is prepared.

Selling price: CHF 34.90 RRP CHF 39.80

In stock: 1 on the shelf, shipped within 1-3 days

Set tunnel construction “rubble stone”, single track with overhead line, 4 moulds (silicone moulds)
Spörle-Formen 6300
Set tunnel construction “rubble stone”, single track with overhead line, 4 moulds (silicone moulds)

Silicone moulds for tunnel construction "rubble stone", single track with overhead line, 4 moulds. Stone, medium, like 6009, fits 6008, 6010, 6011; W x H: 123×113 mm. Masonry, mould with 5 portal arch parts with overhead line equipment like 6304, 6306, 6317; W x H x D: 86 x 80 x 18 mm.

Regular price: CHF 78.00

In stock: 1 on the shelf, shipped within 1-3 days

Kit for a solid-web girder bridge
Spörle-Formen 9000
Kit for a solid-web girder bridge

Kit solid-web girder bridge. Brass parts are stamped and embossed, with “proper” round rivet heads. A demanding kit for experienced modellers, which can be soldered or glued, but it is better to solder all the parts. Marc Heckmann, known from many publications, already published a detailed description of this bridge in EK 12/2007, explaining the assembly very well step by step.

Regular price: CHF 98.00

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Ballast track grey fishplates
TILLIG 83950 Scale H0m
Ballast track grey fishplates

Fishplates (pack of 20 pieces)

Selling price: CHF 7.80 RRP CHF 8.70

In stock: 1 on the shelf, shipped within 1-3 days

Ballast track grey fishplate connection
TILLIG 83951 Scale H0m
Ballast track grey fishplate connection

Fishplates with connecting element (pack of 10 pieces)

Selling price: CHF 9.50 RRP CHF 10.50

In stock: 1 on the shelf, shipped within 1-3 days

Handantrieb ELITE
TILLIG 85531 Scale H0
Handantrieb ELITE

Manual drive for H0 ELITE points, left

Selling price: CHF 21.90 RRP CHF 24.30

In stock: 1 on the shelf, shipped within 1-3 days

Handantrieb ELITE
TILLIG 85532 Scale H0
Handantrieb ELITE

Hand drive for H0 ELITE points, right-hand

Selling price: CHF 21.90 RRP CHF 24.30

In stock: 1 on the shelf, shipped within 1-3 days

Insulated rail joiner
TILLIG 86101 Scale H0
Insulated rail joiner

Insulating rail joiners, grey (Pack of 20)

Selling price: CHF 4.80 RRP CHF 5.30

In stock: 1 on the shelf, shipped within 1-3 days

Blank fishplates
TILLIG 86102 Scale H0
Blank fishplates

Fishplates, blank nickel silver (Pack of 25 pieces)

Selling price: CHF 4.90 RRP CHF 5.40

In stock: 1 on the shelf, shipped within 1-3 days

Left-hand curved point
Trix 14981
Left-hand curved point

Curved points R3/R4. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and a curve angle of 30° can be taken into account. The track layout is therefore considerably slimmer. Nevertheless, the space required is still not too great, even for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. Stop-point function optional. An electric drive can be retrofitted.

Regular price: CHF 28.40

In stock: 1 on the shelf, shipped within 1-3 days

15% off the recommended price
Trix Large Track Extension Set
Trix 62900 Scale H0
Trix Large Track Extension Set

Model The track extension set allows the track plan of all starter sets to be extended functionally. It can be used for parallel track connections, passing loops or refuge sidings, a siding and new lines. Suitable for the Trix starter sets as well as for existing layouts. It can be expanded further with the entire C track programme. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Highlights With Trix C track right from the start: layout operation grows Note Contents: 7 x 62172 straight track 171.7 mm 7 x 62188 straight track 188.3 mm 3 x 62224 curved track R 2 / 24.3° 8 x 62230 curved track R 2 / 30° 2 x 62611 left point 24.3° 1 x 62612 right point 24.3° 1 x 62671 left curved point 30° 1 x 62672 right curved point 30° 1 x 62977 buffer stop 80.5 mm

Selling price: CHF 169.15 RRP CHF 199.00

In stock: 1 on the shelf, shipped within 1-3 days

Transition track
Trix 62951
Transition track

Special track for connecting Trix C track and conventional Code 83 track with ballast bed. One end with click connection, one end with fishplate. Length 47 mm. Suitable for connecting to track systems with a rail profile height of 2.1 mm (Code 83).

Regular price: CHF 7.50

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Minitrix Track Planning Stencil
Trix 66600 Scale N
Minitrix Track Planning Stencil

This template can be used to design and draw track diagrams in 1:160 scale. It is indispensable for anyone who wants to design their own track plans. With detailed instructions!

Selling price: CHF 25.50 RRP CHF 29.99

In stock: 1 on the shelf, shipped within 1-3 days

H0 Colour light block signal
Viessmann 4011 Scale H0
H0 Colour light block signal

Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

Selling price: CHF 20.90 RRP CHF 22.80

In stock: 1 on the shelf, shipped within 1-3 days