Track
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 3 LEDs, maintenance free. Signal pictures Hp0, Hp1 and Hp2. Suitable control module: item 5222. Height: 7,9 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Special catenary contact wire piece for easy spanning of crossroads, ready-to-install. Length: 13,7 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Checking the correct position of catenary wire.
In stock: 1 on the shelf, shipped within 1-3 days
To shorten the universal catenary wires and for easy bending the fixing eyehooks.
In stock: 1 on the shelf, shipped within 1-3 days
The set consists of 10 masts, 3 m catenary band and screws. For a quick and easy handling on single- and multitrack tunnel distances. Tunnel catenary is universal applicable to all common track systems. Even suitable for hidden sidings with points and cross-overs track helix. Height of mast: 6,75 cm, height of beam: 4,5 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire to the track middle. For determining the correct mast position and checking the distance between catenary wire to the track middle. That ensures that the current consumer has always contact with the catenary wire.
In stock: 1 on the shelf, shipped within 1-3 days
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp1. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
In stock: 1 on the shelf, shipped within 1-3 days
With filigree brass mast, authentic varnishing and base socket for easy mounting. With 3 LEDs, maintenance free. Signal aspect Ra11. Height: 6,5 cm.
In stock: 1 on the shelf, shipped within 1-3 days
The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The brass mast is produced with filigree photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.8 cm
In stock: 1 on the shelf, shipped within 1-3 days
The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm
In stock: 1 on the shelf, shipped within 1-3 days
Level crossing with 2 barriers, powered by 2 separate underfloor drive units. Slow movement during opening and closing of the barriers. Track filling pieces, ramps and printed traffic signs are attached. Upgradable with extension set item 5103. For automatic use additional switching-tracks resp. reed contacts item 6840 are required. For double tracks even an electronic relay item 5552 is required. More connectors are available with items 5101 (2 rail version) and 5102 (3 rail version). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion. Suitable sound module: item 5556. Length of barrier arms: ca. 4,3 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Dimensions: L 5 x W 1,25 x H 0,2 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Rail segments which are not monitored by timer track stop item 5208 or occupancy detector item 5233 should be supplied by this small module. It avoids the loss of feedback which could arise when rail vehicles drive across the insulations between the monitored and non-monitored rail segments. It also ensures that the voltage drop caused by the sensors of item 5233 is transferred to the non-monitored track, otherwise the trains would lose their speed when traversing between the rail segments.
In stock: 1 on the shelf, shipped within 1-3 days
Level crossing with two barriers, powered by 2 separate drive units which slowly open and close the barriers. Track filling pieces, ramps and printed traffic signs are also included. Automatic operation requires additional switching tracks resp. switching contacts. For two tracks lines electronic relay item 5552 is also required. Suitable sound module: item 5556. Length of barrier approx: 5,8 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Level crossing with 2 crossing barriers, powered by 2 separate underfloor drive units. Slow movement during opening and closing of the barriers. Track filling pieces, ramps and printed traffic signs are attached. For automatic use additional switching-tracks resp. reed contacts are required. For double tracks an electronic relay item 5552 is also required. Maintenance free by LED lighting. Suitable sound module: item 5556. Length of barrier arms: approx. 4,6 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Realflex elastic thread with hangers in H0 scale, for ten sections. The thread is wound on a two-flange reel. It is accompanied by a flat fret on which the very fine hangers lie side by side, held by cross bars and separated one at a time.
On order, lead time to be confirmed
Two RENFE catenary masts with CR-160 bracket in H0 scale. The pierced-section mast, painted silver grey, plugs into a light grey foundation block with a locating pin; the angled bracket is stayed by a tie rod and carries dark brown insulators and a fine registration arm with a hook. The set comes in a blister pack with foam bedding, and the label identifies the masts as type X2B.
On order, lead time to be confirmed
Ten RENFE catenary masts with CR-160 bracket in H0 scale, as stated by the manufacturer. The silver grey pierced-section mast plugs into a light grey foundation block; the angled, stayed bracket carries dark brown insulators and a fine registration arm with a hook. Supplied in a window box with a foam tray, the label identifying the masts as type X2B.
On order, lead time to be confirmed
RENFE Z6 masts in H0 scale, two units. The open lattice shaft, with stacked rectangular openings, tapers slightly towards the top. Each mast stands on a solid square base and carries a small moulded fitting at its head. Finished in light grey.
On order, lead time to be confirmed
RENFE cross span bridge, version L, in H0 scale. Two silver grey pierced-section masts on foundation blocks carry a lattice cross beam. The manufacturer states two pairs of brackets of differing types, each with a stayed arm, a dark insulator and a fine registration arm with a hook.
On order, lead time to be confirmed
Six brackets for RENFE cross span bridges in H0 scale. The set holds two types, three of each: a short version with a straight arm and a longer one with an angled end. Each bracket mounts on the portal beam through a T-shaped plate, is stayed by a tie rod and carries a dark insulator and a fine registration arm with a hook.
On order, lead time to be confirmed
RENFE cross span bridge, version S, in H0 scale. Two silver grey pierced-section masts on foundation blocks carry a lattice cross beam. The manufacturer states two pairs of brackets of differing types, each stayed and fitted with a dark insulator and a fine registration arm with a hook. S is the shortest span in the range.
On order, lead time to be confirmed
RENFE cross span bridge, version M, in H0 scale. Two silver grey pierced-section masts on foundation blocks carry a lattice cross beam. The manufacturer states two pairs of brackets of differing types, stayed, with a dark insulator and a fine registration arm with a hook. The span falls between the S and L versions.
On order, lead time to be confirmed
RENFE cross span bridge, version XL, in H0 scale. Two silver grey pierced-section masts on foundation blocks carry a lattice cross beam. The manufacturer states three pairs of brackets of differing types, stayed, with a dark insulator and a fine registration arm with a hook. XL is the longest span in the range.
On order, lead time to be confirmed