Track
Curved track R3. Radius 261.8 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Radius 3: 396,4 mm, measured to track centre. Outer diameter: 810 mm. 12 tracks make up a circle.
In stock, shipped within 1-3 days
20 pieces per pack. For mechanical and electrical joining of tracks together.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 217.9 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track allows you to realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for naturalistic design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre rail For all those wanting to combine plastic tracks with metal tracks, the 2291 transition track is available
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 41.3 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung track planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Reliable electrical operation thanks to the proven centre conductor For anyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Prototype The Märklin C track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, using special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin curved C track with a radius R1 of 360 mm / 30°. The click connection with the "Click". Set up and taken down in no time. Stable and durable. The Märklin C track 24130 with radius R1 (360 mm) and a 30° angle is ideal for precise track runs and transitions. It complements the C track system perfectly – whether when building compact layouts or as an exact curve compensation for demanding track geometries. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliable centre conductor operation and the common return on the two rails are always retained, allowing great track routes without complicated wiring (e.g. for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track therefore looks as if it were made from a single length, just like the prototype. Special fishplates are not needed. Invisible strength: Thanks to this stable click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can therefore be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of space for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Curved C track (6 pieces) with radius R1 (360 mm) and a 30° angle Electrical operating reliability thanks to the proven centre conductor Perfect for curve corrections, parallel runs and compensating sections Simple click system – stable assembly without tools Realistic ballast look – ready to use straight away or can be customised
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 203 mm. Intended for curved track with a radius of 515 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 3.18 / 1 pc.)
In stock, shipped within 1-3 days
Straight track. Length 104.2 mm (standard length).
In stock, shipped within 1-3 days
Curved track R3a. Radius 295.4 mm, arc angle 15°.
In stock, shipped within 1-3 days
Radius 3: 396,4 mm, measured to track centre. Outer diameter: 810 mm.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 156 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track allows you to realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for naturalistic design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre rail For all those wanting to combine plastic tracks with metal tracks, the 2291 transition track is available
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 142 mm. Intended for curved sections with a radius of 360 mm (C track, K track, M track). 16 contact wires of 22.5° each are needed for one circle. Pack of 5 pieces. Note The contact wires of the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The contact wire pieces are prefabricated and very easy to fit.
Content: 5 pc. (CHF 2.98 / 1 pc.)
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 172.5 mm. Intended for curved track with a radius of 437.5 mm (C track, M track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 2.98 / 1 pc.)
In stock, shipped within 1-3 days
Model Round mast with a metal bracket arm. Base with a mounting screw and click connection. Additional base as a holder on the C track. Height 100 mm. Pack of 5 pieces. Note The masts of the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is fitted into the matching base for C track or K track by means of a click connection.
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Curved track R20. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius of 437.5 mm / arc of 30°. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Curved track R6. Radius 480 mm, arc angle 15°. 24 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R7. Radius 765 mm, arc angle 12°. Mainly used as the opposite curve for turnouts 22301/22303.
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and professionals. Model Trix curved H0 track with a radius of 437.5 mm / arc of 15°. The click connection with the "Click". Assembled and dismantled in next to no time. Sturdy and durable. The Trix C track is the ideal track for quickly setting up a track figure on the table or on the floor. The low-resistance click connections at the rail ends offer particularly good contact reliability and conductivity. The connections are mechanically very precise and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feed cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and for the transitions into the existing areas the transition track (62951) is used, which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM will run here – and that is practically every model for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, small rail fittings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of fragile fishplates Quick assembly and dismantling thanks to the sturdy click connection, even on carpet
In stock, shipped within 1-3 days
Curved track R1. Radius 194.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R3a. Radius 295.4 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R2. Radius 228.2 mm, arc angle 6°.
In stock, shipped within 1-3 days
Straight Railtrack 57,5 mm.
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 252.7 mm. Intended for curved track with a radius of 643.6 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 4.18 / 1 pc.)
In stock, shipped within 1-3 days