Track
This high-quality base plate is the ideal basis for the stable assembly of your model railway layout. It is perfectly suited to raising or aligning bridge piers, ramps and other structures – and thus makes realistic height profiles and the creation of several levels possible. Whether for approach ramps, straight sections of line or complex scenic transitions – with this plate you create a solid foundation for creative, prototypically detailed model landscapes. 2.5 mm high. Can be used as a foundation.
In stock, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R 2 of 228.2 mm - 30°. Circle = 12 tracks. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Prototype The Trix H0 track combines robustness, electrically reliable connections and a prototypical appearance. The H0 track system can be extended as desired. The ideal track system for newcomers and experts. Model Trix curved H0 track with a radius of 437.5 mm / arc of 24.3°. Corresponds to the point curve. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Trix C track is the ideal track for quickly setting up a track layout on the table or on the floor. The low-resistance click connections at the rail ends offer particularly reliable contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The track and operating power for the model railway can be fed in anywhere. The feeder cables are connected with flat plugs to the contact tabs present in every track section. This gives the flexibility for the most varied model railway lines. A track system that allows ever new running experiences on ever new track arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any extension you use the elegant ballasted track, and for the transitions into the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM standards will run here – and these are practically all of the models for the two-rail power supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 sector. Highlights Click and Play: secure, indestructible click connection Perfect in shape and appearance: ballast bed, sleepers, rail fastenings Code 83: rail profile 2.1 mm high Universal: for vehicles to NEM. Clear view: free rail foot between the sleepers Geometry: track combinations without piecing together Modular: the track bed always fits - without any reworking Below the baseboard: protected plug contacts instead of delicate fishplates Quick assembly and dismantling thanks to the stable click connection, even on a carpet
In stock, shipped within 1-3 days
Curved track R5. Radius 362.6 mm, arc angle 15°. 24 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 5 x 1/1 = 900 mm. Track curves with different radii can be produced with this track. It can be shortened with a fretsaw. The 7595 connecting and contact clips must be fitted at the cut points. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track allows you to realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for naturalistic design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre rail For all those wanting to combine plastic tracks with metal tracks, the 2291 transition track is available
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model Length 14° 26'. Counter-curve for points 22715 and 22716. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Model Made of welded steel wire. Length 228 mm. Intended for curved track with a radius of 579.3 mm (C track). 16 catenary wires of 22.5° each are required for a circle. Pack of 5 pieces. Note The catenary wires for the H0 catenary are made of welded steel wire. The electroplated surface looks realistic and protects against corrosion. The catenary wire pieces are prefabricated and very easy to install.
Content: 5 pc. (CHF 3.78 / 1 pc.)
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 3/4 = 22° 30'. Radius 424.6 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track allows you to realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for naturalistic design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre rail For all those wanting to combine plastic tracks with metal tracks, the 2291 transition track is available
In stock, shipped within 1-3 days
Prototype The Märklin curved point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin left curved point with an inner curve R3 of 515 mm / 30°. Outer curve: 30° at a parallel circuit spacing of 64 mm. With a manual control lever. Two 24315 tracks are required in the inner curve of the point; a matching ballast base piece is included. The 74491 electric point motor, the 74462 digital decoder and the 74470/74471 point lanterns can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R1 of 194.6 mm - 24°. Circle = 15 tracks. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Curved track R1. Radius 194.6 mm, arc angle 24°.
In stock, shipped within 1-3 days
Curved PROFI track with ballast bed, radius 420 mm (R2), curve angle 36°, outside diameter 873 mm. 10 pieces form a circle.
In stock, shipped within 1-3 days
Prototype Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals alike. Model Märklin straight track with a length of 110 mm. The click connection with the "Click". Set up and taken down in no time at all. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Fast setting up and taking down
In stock, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 33.6 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down
In stock, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix curved track with a radius R 6 of 526.2 mm - 15°. Circle = 24. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down
In stock, shipped within 1-3 days
Sleeper end piece for flexible track. To enhance the appearance of flexible track ends which have been cut to size, ensuring a correct sleeper spacing. 24 pc./pack.
In stock, shipped within 1-3 days
Curved track R2. Radius 228.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Radius 2: 225,6 mm, measured to track centre.
In stock, shipped within 1-3 days
Model Lattice mast and bracket arm made of metal. Base with a mounting screw and a click connection. Additional base as a mounting for the C track. Height 100 mm. Pack of 5 pieces. Highlights The masts for the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is inserted by means of a click connection into the matching base for C track or K track
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Straight track G1. Length 230 mm (standard length).
In stock, shipped within 1-3 days
Curved track R3. Radius 419.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R4. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded as desired. The ideal track system for newcomers and professionals. Model Minitrix straight track with a length of 76.3 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, swarf left lying under the track or deburred drill holes have a relatively greater effect on the 1:160 scale than on larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix track has solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For expanding your layout easily there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down
In stock, shipped within 1-3 days
Curved track R2. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days