Track
Curved turnout right hand BWr9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42477
On order, shipped within 10-15 days
Straight track G1 with white bedding. Length 230 mm (standard length). Ballast bed in snowy look Perfect for extending the track oval of the ROCO Christmas train
On order, shipped within 10-15 days
Straight track G4 with bedding. Length 920 mm (4x standard length).
On order, shipped within 10-15 days
Curved track R2¼ with bedding. Radius 358 mm, arc angle 7.5°.
On order, shipped within 10-15 days
Curved track R3¼ with bedding. Radius 419.6 mm, arc angle 7.5°.
On order, shipped within 10-15 days
Straight track G¼ with bedding. Length 57.5 mm (quarter standard length).
On order, shipped within 10-15 days
Digital feeder track with bedding. Length 115 mm (half standard length). This feeder track is not equipped with interference suppressors for radio interference suppression and therefore only approved for use in digital systems.
On order, shipped within 10-15 days
Circuit track with potential-free switching contact, with bedding. Length 115 mm (half standard length). Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to avoid switching spikes. With bumper protection Can also be used as a response instantaneous contact along with a response module or detector 10808.
On order, shipped within 10-15 days
Feeder track with bedding and EMC interference suppressor. Length 115 mm (half standard length). Not suitable for digital operation!
On order, shipped within 10-15 days
Curved track R2 with bedding. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R3 with bedding. Radius 419.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R4 with bedding. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R5 with bedding. Radius 542.8 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R6 with bedding. Radius 604.4 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R9 with bedding. Radius 826.4 mm, arc angle 15°.
On order, shipped within 10-15 days
Curved track R10 with bedding. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.
On order, shipped within 10-15 days
Curved track R20 with bedding. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.
On order, shipped within 10-15 days
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Turnout right hand Wr15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Asymmetrical three-way turnout DWW15 with bedding, manually operated. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°. To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails. Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 spacers are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frogs
On order, shipped within 10-15 days
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Curved turnout left hand BWl2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days
Curved turnout right hand BWr2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days