Track
geoLine track set C Content: 2 straight tracks G185 (61111) 2 curves R3 (61123) 1 manual uncoupler track (61119) 1 manual curve turnout right (61155) 1 manual turnout right (61141) 1 counter curve GB22.5 (61128) Size: approx. 230 x 100 cm
On order, shipped within 10-15 days
Track set D geoLine. Content: 3 straight tracks G200 (61113) 6 straight tracks G185 (61111) 1 straight track G100 (61123) 1 curved track R3 (61123) 10 curved tracks R4 (61124) 2 manual tournouts left (61140) 1 manual curved tounout left (61154) 1 buffer stop kit (42608) 1 track end piece (61180) Size: approx. 250 x 105 cm
On order, shipped within 10-15 days
Track set E geoLine. Content: 1 straight track G200 (61110) 2 straight tracks G100 (61113) 1 manual uncoupler track (61119) 2 manual tournouts left (61140) 2 manual tournouts right (61141) 2 buffer stop kits (42608) 2 track end pieces (61180) Size: approx. 250 x 105 cm
On order, shipped within 10-15 days
Straight track G200. Length 200 mm (standard length).
On order, shipped within 10-15 days
Straight track G185. Length: 185 mm. Adapter track for straight turnouts, threeway-turnout and double-slip.
On order, shipped within 10-15 days
Adapter track G100 between geoLine tracks and ROCO LINE tracks, length: 100 mm.
On order, shipped within 10-15 days
Curved track R2. Radius 358 mm, arc angle 30°.
On order, shipped within 10-15 days
Curved track R3. Radius 434.5 mm, arc angle 30°.
On order, shipped within 10-15 days
Curved track R4 Radius 511.1 mm, arc angle 30°.
On order, shipped within 10-15 days
Curved track GB22.5. Radius 502.7 mm, arc angle 22.5°. Opposite curve for straight turnouts, threeway-turnout and double-slip.
On order, shipped within 10-15 days
Turnout left hand, manually operated. Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarization of the turnout frog is prepared.
On order, shipped within 10-15 days
geoLine track set A1. Contents: 4 straight tracks G200 (61110) 1 manual turnout, left (61140) 1 buffer stop kit (42608) 1 roadbed end piece (61180) Space required: approx. 210 x 90 cm
On order, shipped within 10-15 days
geoLine track set B1. Content: 2 straight tracks G200 (61110) 4 straight tracks G185 (61111) 2 curved tracks GB22.5 (61128) 1 manual turnout left (61140) 1 manual turnout right (61141) Space required: approx. 250 x 90 cm
On order, shipped within 10-15 days
geoLine track set C1. Content: 6 straight tracks G200 (61110) 3 straight tracks G185 (61111) 2 curved tracks R3 (61123) 1 manual curved turnout left (61154) 1 manual curved turnout right (61155) Space required: approx. 230 x 100 cm
On order, shipped within 10-15 days
Insulated rail connector with general purpose tool. Content: 28 units/pack – can also be used for other track systems.
On order, shipped within 10-15 days
Electrically operated turntable, with electrically switchable track exits using the turntable control switch 6910. Length of the turning bridge: 310 mm. The turntable is prototypically mounted in a recess and fitted with accurate details. As delivered, there are 6 exit tracks and 4 over-run ends. The exit tracks can be unclipped and repositioned as desired, or extended using the turntable extension set 6153 right up to the complete 48 exits. The “thinking” turntable: using the switch 6910, will determine the rotation direction in order to access the desired exit. The power feed is activated within the turning bridge. The power to the track exit with which the turntable is lined up, either left or right, can be fed with power using the switch 6910. All other track exits remain isolated (even those opposite each other).A maximum of 48 track exits can be controlled and electrically operated without the need for any additional wiring. Note: Control your turntables easily – with TURN-CONTROL, the electronic turntable control device (item No. 6915).
On order, shipped within 10-15 days
Extension set for the PROFI-track turntable 6152 for 2-rail operation with nickel silver tracks.
On order, shipped within 10-15 days
Signals - Setup and connection - German This brochure explains the main electrically-powered model signals, shows you the prototypical installation location and gives specific tips how to set them up for analog or digital switching, from block diagrams to the switching signals and rail crossings. The publication primarily concentrates on the Viessmann signals of nominal size H0 and N present in the Roco-Fleischman distribution. But also older models or signals from other manufacturers and other nominal sizes can be set up and connected based on these instructions. The circuit suggestions were mainly prepared for DC model railways, but most of them can also be used on AC systems with minor adjustments.
On order, shipped within 10-15 days
ROCO LINE track plans H0 - German This manual, edited by experts, depicts a large number of track plans that perfectly match the ROCO LINE track system. It provides the user with clear and comprehensive information about how to easily build challenging track aspects and railway layouts using the matching part lists.
On order, shipped within 10-15 days
GEOLINE track plans H0 - German This manual offers various options and gives tips how to easily build and plan a model railway. This starts with finding a suitable motive, practical ideas for the step by step structure and leads to the creation of a matching track plan.
On order, lead time to be confirmed
Frog inserts for ROCO LINE turnouts with branch angle of 15°.
On order, shipped within 10-15 days
Track extension set "Bahnhof": 1 manual point BW, right-hand, with compensating piece 1 manual point BW, left-hand, with compensating piece 7 straight tracks BG 1 1 straight track BG 3 1 straight track BG 4 4 straight tracks BG 5 2 curved tracks BR 22 3 insulating fishplates 2 fishplates with connection element Operating instructions with track and connection plan With this set, the oval of track of the sets item no. 01424, 01428, 01429, 01431, 01432, 01434, 01440, 01442, 01445, 01448, 01500 and 01501 can be extended to an oval with a two-track station. If switchable track sections are used, a push-button panel (item no. 08211) and a connecting wire (item no. 08972) are also required.
On order, lead time to be confirmed
Track extension set "Parallel circuit part 1" (for expanding starter sets 01424, 01428, 01429, 01431, 01432, 01434, 01440, 01442, 01445, 01448, 01500 and 01501):
On order, lead time to be confirmed
Track extension set "Parallel circuit part 2" (for expanding starter sets 01424, 01428, 01429, 01431, 01432, 01434, 01440, 01442, 01445, 01448, 01500 and 01501):
On order, lead time to be confirmed