Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track System

Filter products
14% off the recommended price
Rail Joiners
Trix 66520 Scale N
Rail Joiners

2-pole with a twin wire for the track power connection. Suitable as a mechanical connection between track sections with the 14901 flexible track.

Selling price: CHF 3.15 RRP CHF 3.69

On order, shipped within 10-15 days

14% off the recommended price
Track Clips, pack of 40
Trix 66528 Scale N
Track Clips, pack of 40

For an additional contact-reliable connection of loosely laid tracks. 40 pieces/pack.

Content: 40 pc. (CHF 0.38 / 1 pc.)

Selling price: CHF 15.30 RRP CHF 17.99

On order, shipped within 10-15 days

14% off the recommended price
Two Feeder Clips, Single Conductor, for Track with Concrete Ties
Trix 66554 Scale N
Two Feeder Clips, Single Conductor, for Track with Concrete Ties

Note Minitrix connection clamps and contacts allow the power feed cables to be connected conveniently (for example at signal isolating sections, isolating tracks, block protection sections, etc.) at any point on the track layout, even in the middle of complicated point work.

Selling price: CHF 4.70 RRP CHF 5.49

On order, shipped within 10-15 days

14% off the recommended price
Insulated Rail Joiners for Track with Concrete Ties (Contents 10 Pieces)
Trix 66559 Scale N
Insulated Rail Joiners for Track with Concrete Ties (Contents 10 Pieces)

For insulated gaps between two tracks. They are exchanged for the metal fishplates. 10 pieces/pack.

Content: 10 pc. (CHF 0.39 / 1 pc.)

Selling price: CHF 3.85 RRP CHF 4.49

On order, shipped within 10-15 days

15% off the recommended price
Trix C Track Turntable
Trix 66861 Scale H0
Trix C Track Turntable

Prototype DB standard design, 23 m. Suitable for conventional and digital operation. Remote-controlled turntable bridge with a built-in motor. Digital control exclusively with the Mobile Station 2 and the Central Station 2 and 3 (not included). Particularly convenient control with the Central Station 2 and 3 by means of track pre-selection (after the update has been carried out), or with various digital central units using the DCC digital format. Function: turning right/left. Pit for recessed installation in the layout. 6 track connections for C tracks, for fitting at any position. Exit angle in the 12° C track grid. Can be expanded to a maximum of 30 track connections in a 12° grid with the 66871 extension. Polarity changeover programmable. Outside diameter with one exit opposite another 378 mm. Diameter of the pit without exit tracks 278 mm. Bridge length 263 mm. Suitable for the 72886 roundhouse. Various sound functions that can be controlled. Turntable operator's cabin and outside lamp lit with LEDs, can be controlled. Model The Trix C track is the ideal track for quickly setting up a track arrangement on the table or on the floor. The low-resistance click connections of the rail ends are particularly reliable in contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. This brings flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any expansion you use the elegant ballasted track, and for the transitions to the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and these are practically all of the models newly offered by the various manufacturers in the last two decades for the two-rail supply system! The track thus contributes directly to the important compatibility of this H0 area. Highlights New tooling Sound Operator's cabin with LED lighting

Selling price: CHF 424.15 RRP CHF 499.00

On order, shipped within 10-15 days

14% off the recommended price
Trix Expansion Set for the 66861 Turntable
Trix 66871 Scale H0
Trix Expansion Set for the 66861 Turntable

3 track connections for C tracks. For fitting at any position. Built-in running current contacts. Length 57.5 mm. The Trix C track is the ideal track for quickly setting up a track arrangement on the table or on the floor. The low-resistance click connections of the rail ends are particularly reliable in contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. This brings flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any expansion you use the elegant ballasted track, and for the transitions to the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and these are practically all of the models newly offered by the various manufacturers in the last two decades for the two-rail supply system! The track thus contributes directly to the important compatibility of this H0 area.

Selling price: CHF 38.25 RRP CHF 44.99

Pre-order, release expected in December 2026