Accessories
New for N and TT gauge: no more unwanted uncoupling at changes of gradient on point tracks and similar places. The ARNOLD magnetic couplers provide simple coupling and uncoupling as well as uncoupling-safe running. Suitable for all NEM 355 coupler pockets. Contents: 10 magnetic couplers.
In stock: 1 on the shelf, shipped within 1-3 days
Point motor with electric motor for under-surface mounting.
In stock: 1 on the shelf, shipped within 1-3 days
Bogie side frame for the 3250-3253 and 3290-92 models, pack of 2.
In stock: 1 on the shelf, shipped within 1-3 days
Spare part: 2 bogie side frames for the 3272 model.
In stock: 1 on the shelf, shipped within 1-3 days
Kit for a transfer installation used to load standard gauge wagons onto transporter bogies.
In stock: 1 on the shelf, shipped within 1-3 days
100 m reel Single-core PVC insolation 1-colour Loads 3 A Cu.-conducter 18 x 0.10 mm Application: for analog layouts
In stock: 1 on the shelf, shipped within 1-3 days
25 m reel Single-core PVC insolation 1-colour Loads 3 A Cu.-conducter 18 x 0.10 mm Application: for analog layouts
In stock: 1 on the shelf, shipped within 1-3 days
40 m reel Single-core PVC isolation Loads 12 A Cu.-conducter 16 x 0.20 mm Application: for garden railways, UV-resistant
In stock: 1 on the shelf, shipped within 1-3 days
25 m reel Red/brown Double-core For Märklin® PVC isolation Loads 5 A Cu.-conducter 14 x 0.15 mm Connection to track
In stock: 1 on the shelf, shipped within 1-3 days
72 mm long 1 piece
In stock: 1 on the shelf, shipped within 1-3 days
For illumination of industrial buildings New mould wide angle of reflection (160°), for perfect illumination of buildings Ø 1,5 cm, round Light: warm white Low power input Virtually unlimited service life due to LED technology With 2 cables With 2 mounting lug Individual, packed in bag Connection: max. 19 V We recommend a operating voltage of 12 V DC
In stock: 1 on the shelf, shipped within 1-3 days
A 5 m reel of flat cable with a cross-section of 0.14 mm².
In stock: 1 on the shelf, shipped within 1-3 days
A versatile street light with a mast made of real wood. Also suitable for industrial sites and other areas. Features a replica of the concrete surround at the base of the lamp.
In stock: 1 on the shelf, shipped within 1-3 days
Model of a mobile phone mast with warning light at the top (red LED). For connection to 14–16 V DC or AC. Height: approx. 175 mm.
In stock: 1 on the shelf, shipped within 1-3 days
You can almost smell the sausages sizzling on the barbecue... A “brick-built” surround with a campfire illuminated by 2 light bulbs and an electronic control circuit. The matching sausages and steaks are supplied with the grill grate. Includes a wooden table, 2 wooden benches and 6 tree stumps as additional seating.
In stock: 1 on the shelf, shipped within 1-3 days
A 10 m reel. Special cable with a diameter of only 0.25 mm (YV wire, 0.05 mm²) with super-thin plastic insulation.
In stock: 1 on the shelf, shipped within 1-3 days
A 10 m reel. Special cable with a diameter of only 0.25 mm (YV wire, 0.05 mm²) with super-thin plastic insulation.
In stock: 1 on the shelf, shipped within 1-3 days
IR transmitter and receiver 18 x 9 x 20 mm. The range is max. 100 mm with electronic relay 5740 and control board 5745, max. 250 mm with timer 5961/5963.
In stock: 1 on the shelf, shipped within 1-3 days
Bus distribution plate with 0.9 m cable, connected to the „Extend“ jack of the ECoS or Central Station: two jacks for hand controllers on the front panel, four sockets at the back for ECoSBoost boosters and ECoSDetector feedback modules.
In stock: 1 on the shelf, shipped within 1-3 days
L.Net Converter to connect handheld throttles and feedback modules to ECoS or CS1 »Reloaded« The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld throttles and feedback modules. The ECoSniffer input offered at least a solution for handheld throttles (in combination with „older"digital command stations), whereas the feedback modules couldn’t be integrated into the system. For the first time, it is possible to connect Uhlenbrock® or Digitrax® handheld throttles directly to the ECoS or Central Station 60212 „Reloaded", thanks to the ESU L.Net Converter. Additionally, you can continue to use feedback devices which support the well-known Loconet® communication protocol. So, what can the L.Net Converter do now? Handheld throttle throughout With the L.Net Converter you are able to operate Loconet® compatible handheld throttles directly with your ECoS. Hereby, the handheld throttle´s display will always stay synchronised with the ECoS. Furthermore there is no restriction to one data format. You can control an unlimited number of locos speaking DCC, Motorola®, Selectrix® or M4®, even if the handheld throttle alone does not have the capability to do this. Particularly in Germany the popular Daisy®-, Fred®- or ProfiBoss® handheld throttles can be used, as well as e.g. DT400 or UT2 by Digitrax®. The L.Net Converter fully integrates them into the ECoS system. Via the ECoS you are able to assign the locos desired and call them up on the handheld throttle; or respectively use the easy-to-handle Fred® handheld throttles to assign the loco desired conveniently to the ECoS. Feedback modules You might already have Loconet® feedback modules for track occupancy detection. With the aid of the L.Net Converter you may now continue to use those devices. The ECoS allows you to use the contacts for activating routes or shuttle train control. Of course you can simultaneously use s88, Loconet® and ECoSDetector feedback modules. Communication Just larger layouts are operated with the support of a PC. Often there is used a self-made software, which has been optimised for Loconet®. The switch to an ECoS system which comes as an innovative and object-based communication model is thus quite rocky. However, the L.Net Converter will solve this problem. From now on, the ECoS will send loco and turnout commands via the L.Net Converter to the devices connected. The intelligent ESU L.Net Converter allows you finally to replace your »old« command station completely with an ECoS without great effort. Art.No. 50097 L.Net Converter to connect handheld throttles and feedback modules to ECoS or CS1 »Reloaded« Connection example of handheld throttles (schematical)
In stock: 1 on the shelf, shipped within 1-3 days
Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber
In stock: 1 on the shelf, shipped within 1-3 days
Loudspeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL decoders work with loud speakers which have an impendance from 8-32 Ohms. ESU offers you a selection of the sizes 40mm, 57mm and 78mm includung sound chamber as well as some high-class Visation XL loudspeakers without sound chamber. Visaton loudspeakers offer a powerful bass and a high-quality audio playback, whereas ESU loudspeakers are also suitable for open-land vehicles due to their plastic membrane. 50336 50336 50337 50337 50446 Part No. 50322 Loudspeaker Monacor Sp6/4SQ, 59mm, round, 8 Ohms, for PIKO G/LGB Loks 50323 Loudspeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL 50324 Loudspeaker Visaton FRS 7, 70mm, round, 8 Ohms 50336 Loudspeaker Visaton SC4.7ND, 41x70mm, square, 8 Ohms 50337 Loudspeaker Visaton FRS5, 50mm, round 8 Ohms 50446 Loudspeaker 78mm, round, 8-32 Ohms, with sound chamber Expires
In stock: 1 on the shelf, shipped within 1-3 days
Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm. By virtue of the internal design of the decoders, the speakers feature a specially customised impedance of 100 Ohms. Only these speakers may be used! Art.No. 50335 Loudspeaker 32mm, rund, 100 Ohm, without sound chamber Expires 50442 Loudspeaker 23mm, round, 100 Ohm, with sound chamber Expires 50444 Loudspeaker 40mm, round, 100 Ohm, with sound chamber Expires 50447 Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber Expires 50448 Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber Expires
In stock: 1 on the shelf, shipped within 1-3 days
LED lighting strip with taillight, 255mm, 11 LEDs, „yellow“. For gauge N,TT, H0 The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight. You may add a LokPilot Fx V4.0 function decoder at any time. Part No. 50700 LED lighting strip with taillight, 255mm, 11 LEDs, „warm-white“. For gauge N,TT, H0 50702 LED lighting strip with taillight, 255mm, 11 LEDs, „yellow“. For gauge N,TT, H0
In stock: 1 on the shelf, shipped within 1-3 days