Accessories
Model of a modern path light. The filigree design of this lamp has a special charm. This makes it particularly suitable for illuminating paths, parks and gardens. The pedestal light is equipped with long-life LED technology. Height: 16 mm. Light colour: warm white. The product is ready for connection for 12 V, direct voltage (DC). Use the transformer, Art. 180699, to operate the light.
In stock: 1 on the shelf, shipped within 1-3 days
LEDs with enamelled copper wires. Ready for connection to 12-16 V, AC/DC voltage. Pressure-sensitive. To illuminate buildings, rooms, means of advertising, outdoor installations, etc. In AC voltage mode you need rectifier (art. 180633) for flicker-free operation.
In stock: 1 on the shelf, shipped within 1-3 days
180 mm, cold white, for lighting purposes, universal usage. Ready for connection, 12-16 V, AC/DC voltage. Suitable for many platform halls (e.g. art. 120180) and platforms (e.g. art. 120187, 120188, 120191). For flicker-free operation with alternating voltage, you will need the rectifier (art. 180633).
In stock: 1 on the shelf, shipped within 1-3 days
Complete with quality bulb, 12–16 V, DC/AC voltage, 55 mA, cable, E 5.5 mm, Ø 8 mm base.
In stock: 1 on the shelf, shipped within 1-3 days
Welding light: very cold, bluish light. Maximum brightness. Short sequences of flashes of different intensities followed by pauses of varying lengths, e.g. 5 flashes with different brightnesses within 1 sec, then 5 sec pause, then similar flash sequence and 8 sec pause, etc.
In stock: 1 on the shelf, shipped within 1-3 days
This light effect creates particularly atmospheric lighting conditions with its soft transitions and slow colour changes. It is equally suitable for illuminating a building (e.g. a castle or a facade) as for the effective lighting of a complete diorama.
In stock: 1 on the shelf, shipped within 1-3 days
Long-lasting geared motor characterized by its uniform run and its high torque, can be used e.g. to drive funfair models you have built yourself. The »D« shaft of that motor is equivalent to the »D« shaft of FALLER synchronous modeller’s motor, Art. 180629, so that the latter can also be replaced by the former with some manual dexterity. The geared motor may be operated with a maximum voltage of 5 V DC and reaches a speed of up to approx. 90 RPM.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyres for Fleischmann H0 locomotives: outside diameter 10.6 mm, width 1.3 mm. Available as a single piece (00544007) or as a set of 10 (648005).
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyres for Fleischmann N gauge locomotives: outside diameter 5.5 mm, inside diameter 4.5 mm, width 1.3 mm. Available as a single piece (00547001) or as a set of 10 (948004).
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set, H0. Outer diameter 11,6 mm, width 2 mm. 10 pieces/pack. Corresponds to the spare part number 544001.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set H0. Outer diameter 13,6 mm, width 1,3 mm. 10 pcs/pack. Corresponds to the spare part number 544006.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set H0. Outer diameter 10,6 mm, width 1,3 mm. 10 pcs/pack. Corresponds to the spare part number 544007.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set H0. Outer diameter 16,4 mm, width 1,3 mm. 10 pcs/pack. Corresponds to the spare part number 544009.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set H0. Outer diameter 11.5 mm, width 1.5 mm. 10 pcs/pack. Corresponds to the spare part number 54401200.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set H0. Outer diameter 8 mm, width 1.5 mm. 10 pcs/pack. Suitable for loco class 36 (DC). Corresponds to the spare part number 54401300.
In stock: 1 on the shelf, shipped within 1-3 days
FLEISCHMANN slot coupling.
In stock: 1 on the shelf, shipped within 1-3 days
To install the close-coupling conversion set 6574.
In stock: 1 on the shelf, shipped within 1-3 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. Wire length: approx. 30 mm. For further technical specification, see the spec sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
In stock: 1 on the shelf, shipped within 1-3 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
In stock: 1 on the shelf, shipped within 1-3 days
Digital locomotive decoder to NMRA DCC standard for N gauge, version without plug connector with connecting leads for retrofitting DC locomotives without an interface. Supports 14/28/128 speed steps, function mapping (CV 33/34) and load regulation. Predecessor of the current decoder 69685401.
In stock: 1 on the shelf, shipped within 1-3 days
single track feed clips.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set N, 10 pcs/pack. Suitable for diesel railcar units class VT 12 / 612 (DB). Corresponds to the spare part number 54700900.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set N, 10 pcs/pack. Suitable for diesel railcar units class VT 11/ 601 (DB). Corresponds to the spare part number 54701000.
In stock: 1 on the shelf, shipped within 1-3 days
Traction tyre set N, 10 pcs/pack. Outer diameter 4.9 mm, width 1.2 mm. Corresponds to the spare part number 547005.
In stock: 1 on the shelf, shipped within 1-3 days