Accessories
Transparent With detent 16 V/30 mA
In stock, shipped within 1-3 days
Plug-in exchange hoop coupling (NEM 362).
In stock, shipped within 1-3 days
Exchange coupling with lug fitting (hoop coupling).
In stock, shipped within 1-3 days
To slide onto the coupling mounting 6575 and 6576 and adapter 6572. Adjustable coupling height.
In stock, shipped within 1-3 days
Adapter for PROFI coupling head 6570 (adjustable height). Suitable for all vehicles fitted with slot coupling 6516 or 6520.
In stock, shipped within 1-3 days
Round spare brushes and springs, packed in a pair.
In stock, shipped within 1-3 days
PROFI coupling head (adjustable height). Installation using the adapter 9571, 9572, 9573 or 9577.
In stock, shipped within 1-3 days
Adapter for PROFI coupling head 9570 (adjustable height). Suitable for all FLEISCHMANN vehicles fitted with couplings 9521 or 9522. Installation together with the adjustable height PROFI coupling head 9570. The correct coupling height can be achieved using the guide 9579.
In stock, shipped within 1-3 days
For fitting at a suitable place in K tracks or in C tracks. The switching contact (reed contact) triggers a pulse when a vehicle with a switching magnet mounted on its underside passes over it. Potential-free connection. Switching current up to 2 A. Length 38 mm.
In stock, shipped within 1-3 days
3-pole connector (e.g. for 10019, 10520, 10521, 10522, 10524, 10525, 10526, 10775, 10777). The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
In stock, shipped within 1-3 days
Flow improver 100 ml. For plaster casting and water-soluble paints. Our wetting agent reduces air bubbles during casting and improves flow behaviour. Dilute up to 1:3 with water, spray into the mould and spread with a soft brush.
In stock, shipped within 1-3 days
DC 16 V/30 mA Red M 60.201
In stock, shipped within 1-3 days
DC 16 V/30 mA MS 2,8 for Roco®, Trix®, Fleischmann® 12-14 V/60 mA
In stock, shipped within 1-3 days
This glue joins wood, cardboard, styrofoam, and decorating parts. Ideal for building Lasercut-Models.
In stock, shipped within 1-3 days
To automatically realign the coupling into the central position.Only for vehicles without close-coupling mechanism.
In stock, shipped within 1-3 days
Contains 10 ml of special oil for lubricating locomotives and wagons.
In stock, shipped within 1-3 days
Flow improver with 50 ml. For plaster casting and water-soluble paints. Our wetting agent reduces air bubbles during casting and improves flow behaviour. Dilute up to 1:3 with water, spray into the mould and spread with a soft brush.
In stock, shipped within 1-3 days
Contents: 30 Trix Express coupler heads (short version), each packed in pairs (with and without a bow). For fitting in vehicles with a standard coupler pocket (NEM 362) and a guide mechanism. Compatible with the previous Trix Express standard couplers.
In stock, shipped within 1-3 days
Electric uncoupler for H0e, H0m and H0.
In stock, shipped within 1-3 days
25 m reel Single-core PVC isolation Loads 5 A For higher loads Cu.-conducter 14 x 0.15 mm Application: for digital layouts Connection to track
In stock, shipped within 1-3 days
25 m reel Single-core PVC isolation Loads 5 A For higher loads Cu.-conducter 14 x 0.15 mm Application: for digital layouts Connection to light
In stock, shipped within 1-3 days
21MTC adapter board 2, shape of 6090x, with AUX3 and AUX4 (for 21 MTC (not MKL) decoders from generation 3) The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if you do not intend to wire the decoder freely or if you wish to use more than four function outputs on your LokPilot or LokSound decoder. This adapter board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in every suitable position. Decoders with 21MTC connectors (ESU LokPilot or LokSound favoured) are simply plugged onto the adapter board. On the output side, the adapter offers already soldered cables (appr. 20cm length) for all contacts needed. Thus the wiring of your loco is child´s play. There are amplifiers (appr. 250mA each) for function AUX3 and AUX4 (the decoder´s logical outputs) so that ESU decoders have up to 12 available physical function outputs. Dimensions: Length 35.5mm x 20.0mm (With mounting tab: 40.5mm x 20.0mm) Art.No. 51968 21MTC adapter board 2, shape of 6090x, with AUX3 and AUX4 (for 21 MTC (not MKL) decoders from generation 3) 51968
In stock, shipped within 1-3 days
For converting many Märklin H0 locomotives with a disc commutator motor of the small type to the five-pole high-efficiency motor. Consisting of a high-efficiency motor and installation material.
In stock, shipped within 1-3 days
For converting many Märklin H0 locomotives with a disc commutator motor of the large type to the five-pole high-efficiency motor. Consisting of a high-efficiency motor in different designs and installation material.
In stock, shipped within 1-3 days