Accessories
Can be plugged into the 24997 C track. The mast signal lights up during uncoupling. Metal mast. Height 85 mm. Technically corresponds to the earlier mast, item no. 5113.
In stock, shipped within 1-3 days
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
In stock, shipped within 1-3 days
Modern street light epoch IV – VI. Practical plug-in socket provides flexible use and quick exchange of lamps. Maintenance free by LED lighting. Height: 10 cm.
In stock, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Street light epochs III – VI. Height: 10 cm.
In stock, shipped within 1-3 days
Spare part: 10 couplings for model 1293.
In stock, shipped within 1-3 days
Spare part: 12 mm axle bearing bridge for wagons 2273-2277, set of 2 pieces.
In stock, shipped within 1-3 days
25 m reel Brown/yellow Double-core For Roco® PVC isolation Loads 3 A Cu.-conducter 18 x 0.10 mm Connection to light Please note that we no longer carry the 10m reel (Item No. 3199)
In stock, shipped within 1-3 days
21MTC adapter board (for LokSound/LokPilot V3.0 and V4.0 and LokSound/LokPilot 5) The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do not intend to wire the decoder freely. The adapter board offers a possibility for installing a decoder with 21MTC connector. This decoder is simply plugged onto the board. At the other end 21 annular rings make a clean wiring of your loco possible. A neat conversion can be made via this adapter board and enables you to use all additional functions of the 21MTC connector (e.g. loud speaker outputs). Dimensions: Length 22.0mm x 17.0mm (With mounting tab: 27.0mm x 17.0mm)
In stock, shipped within 1-3 days
Improved! A better colour temperature and luminous efficiency as well as a larger angle of radiation ensure a particularly homogeneous illumination of building models. In FALLER kits the optimized cap accurately adapts to the provided holders. 12-16 V, AC/DC.
In stock, shipped within 1-3 days
H0 retrofit decoder set (60760)
In stock, shipped within 1-3 days
Model Feedback module for contact devices on digitally controlled layouts. Can be plugged into the L88 (60883) with the connecting cable included. Connection socket for another s 88 decoder (60881). 16 inputs for contact devices. The L88 (60883) is required for connection to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock, shipped within 1-3 days
Model For switching 4 different track or lighting circuits on or off. For example, 4 sidings in different track power circuits can be switched. With 8 connection sockets on the back. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7273 unit
In stock, shipped within 1-3 days
Power supply plug. For accessory feed. Attention: Not suitable for z21/Z21!
In stock, shipped within 1-3 days
Close coupling heads with advanced uncoupling tab, height adjustable. Due to design considerations the buffer separation will increase approx. 2 mm in most rolling stock when using these coupling devices. Content: 2 pieces/package.
In stock, shipped within 1-3 days
Modern street light epoch IV – VI. Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 10.0 cm.
In stock, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Height: 5,6 cm.
In stock, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Street light epochs III – VI. Height: 10 cm.
In stock, shipped within 1-3 days
Replacement wheelsets for the BEMO locomotives 1250 and 1252 in H0m. Pack of 4 wheelsets.
In stock, shipped within 1-3 days
Spare part: 10 couplings for model 1291.
In stock, shipped within 1-3 days
12 connections Two-part With socket strip 95 mm long Pluggable
In stock, shipped within 1-3 days
DC 16 V/30 mA Yellow M 60.204
In stock, shipped within 1-3 days
Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber
In stock, shipped within 1-3 days
For fitting to older ROCO vehicles.
In stock, shipped within 1-3 days
Using this adjustment gauge, the coupling head 6570 can be adjusted to the correct coupling height in the coupling pockets 6572, 6574, 6575 and 6576.
In stock, shipped within 1-3 days