Accessories
To activate the switch contacts 6435 and 9425 or the switching track 9115. To fix onto the underside of vehicles. Diametre: 5 mm, height 3 mm.
In stock, shipped within 1-3 days
The "SILVERmini+" locomotive decoder has a continuous current rating of 500 mA, with NEM651 interface plug, 2 function outputs, ABC, RailCom, and S.U.S.I. interface. Dimensions: 13 x 7.5 x 2.8 mm.
In stock, shipped within 1-3 days
Adapter cable 10-pin to 7-pin for connecting the Mobile Station 60653, the Mobile Station 60652 and the Trix Mobile Station 66950 to the 60125/60145 Terminal and a 3rd Mobile Station to the Central Station 60213-60215. Furthermore, for connecting a second Mobile Station 60652 to the 24088 feeder track or to the connector box 60115 (H0) or 60111 (Märklin 1).
In stock, shipped within 1-3 days
Extension cable for the main line with a 9-pin socket and a 9-pin plug for connecting a remotely located 60125/60145 Terminal. Length approx. 2 m.
In stock, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder3 has a soldered-on wiring harness with an eight-pin NEM interface plug already fitted, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin LokDecoder3 supports the mfx, MM1, MM2 and DCC digital formats.
In stock, shipped within 1-3 days
Model For switching 4 twin-coil solenoid accessories with automatic cutoff. Automatic feedback of the position by means of LEDs when using the 75491 (K) or 74491 (C) point motors as well as the Minitrix 14934 and 14935 point motors. With 8 sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7271 unit
In stock, shipped within 1-3 days
With a cross-head tip, size 00 (Ph). For the 74990 (C) and 7599 (K) track screws.
In stock, shipped within 1-3 days
NOCH’s Next Top Model! Roll out the red carpet and let's go: We are looking for the super model! The NOCH “Fashion store with micro-motion fashion show” is a fascinating highlight for your H0 scale model railway layout. This detailed laser-cut building brings urban flair and lively scenes to your model world. The set contains a precisely manufactured fashion house made of high-quality laser-cut material, which impresses with its fine structures and realistic coloring. The façade is designed with large shop windows that provide a view of the latest fashion collection. The integrated micro-motion technology is particularly impressive: four exclusive figures, equipped with magnets, move elegantly along the catwalk and present the latest fashions. A further four figures without magnets serve as decoration and liven up the scene even more. This set is an absolute highlight for model-making enthusiasts who value movement and attention to detail. The combination of high-quality laser-cut kit and innovative micro-motion technology makes this fashion store unique. It gives your model landscape a special dynamic and attracts attention. The most important product features at a glance: Scale: H0 (1:87) Contents: Laser-cut fashion house, 8 exclusive figures (4 with magnets), micro-motion drive, numbered certificate, detailed instructions, special laser-cut glue Special feature: Movable figures thanks to micro-motion technology Application: Ideal for creating urban scenes on the model railway layout The application is uncomplicated: The kit is assembled according to the enclosed instructions. The figures with magnets are placed in the positions provided and set in motion by the micro-motion drive. This creates a realistic fashion show that enriches your model world. Bring life and movement to your model landscape with the NOCH fashion store with micro-motion fashion show. This set impresses with its attention to detail, quality and innovative technology - a must for every model making enthusiast! The model is limited to 1000 pieces. A numbered certificate, detailed assembly and connection instructions and special laser-cut adhesive are included. Contents: - Laser-Cut Kit ‘Fashion Boutique’ - 8 exclusive Figures - 4 of them equipped with magnets Micro-motion drive Numbered certificate - Detailed instructions - Special Laser-Cut Adhesive
In stock, shipped within 1-3 days
Revell Aqua Color acrylic paint in an 18 ml container. can be thinned with water low-odour and non-flammable practically free from organic solvents mixable with each other fully dry after 2 to 3 hours Colour: white gloss (RAL 9010).
In stock, shipped within 1-3 days
Revell Aqua Color acrylic paint in an 18 ml container. can be thinned with water low-odour and non-flammable practically free from organic solvents mixable with each other fully dry after 2 to 3 hours Colour: matt white (RAL 9001).
In stock, shipped within 1-3 days
Acrylic paint Aqua Color by Revell in an 18 ml container. can be thinned with water low-odour and non-flammable practically free from organic solvents mixable with each other fully dry after 2 to 3 hours Colour: Matt black (RAL 9011).
In stock, shipped within 1-3 days
With fault clearance to avoid switching spikes and with buffer protection. With all geoLine tracks, this potential-free switch contact can be fitted in the places intended for it. Operated by magnet 42256. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.
In stock, shipped within 1-3 days
Decoder for all DC locomotives with a current consumption of up to 1000 mA (motor 1000 mA, lighting 200 mA). Suitable for digital locomotives with a 6-pin digital interface to NEM. Universally usable in Selectrix 1, Selectrix 2 and DCC format. Automatic analogue detection. Same locomotive address in Selectrix and DCC operation up to locomotive address 99. 7 adjustable maximum speeds. 4 adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional functions (Aux1 and Aux2). Short-circuit protection of the motor output. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel. in Selectrix operation: 31 speed steps. 111 addresses. Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally short up to 127 and long up to 9999. Braking mode with DC voltage braking generators (with analogue detection switched off) and "broadcast-mode" braking generators. Dimensions approx. 14 x 9 x 2.5 mm.
In stock, shipped within 1-3 days
Litz very flexible. Especially suitable for digital layouts.
In stock, shipped within 1-3 days
Electromagnetic points motor for a right-hand point.
In stock: 5 on the shelf, shipped within 1-3 days
Replacement coupling for models 1250-1259, 1260, 1261 and 1270-1274. Pack of 10.
In stock: 5 on the shelf, shipped within 1-3 days
Junction Block, 5-way 2-pin Diameter 2.5 mm
In stock: 5 on the shelf, shipped within 1-3 days
DC Clear 8 mm 19 V / 60 mA
In stock: 5 on the shelf, shipped within 1-3 days
Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit ESU proudly presents a further, newly-developed servo motor for all ambitious model railway fans. The „Precision Servo Motor - Metal“ is preferred by all model railroaders who look for a powerful servo with metal gearing. Thanks to its metal gearing the servo is able to lift nearly twice the load (1.8 kg) of its plastic gearing brother. Moreover, the „Precision Servo Motor - Metal“ is appropriate for all situations in which splicing and beating claim high mechanical requirements from the servo and where the sound development does not play such an important role. With the same measurements as the Precision Servo Motor, the metal gearing is also equipped with the new, micro-processed control electronics for a precise, sensitive heading to the required position. Therefore the impuls suppression makes sure that there won´t be any tremors on the layout when you switch it on. The 30cm cables makes easy wiring possible. Also, the „Precision Servo Motor - Metal“ comes with innovative and well-proven accessories such as a servo holder and controlling wires. Art.No. 51805 Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit
In stock: 5 on the shelf, shipped within 1-3 days
Improved! A better colour temperature and luminous efficiency as well as a larger angle of radiation ensure a particularly homogeneous illumination of building models. In FALLER kits the optimized cap accurately adapts to the provided holders. 12-16 V, AC/DC.
In stock: 5 on the shelf, shipped within 1-3 days
The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:
In stock: 5 on the shelf, shipped within 1-3 days
Interior lighting for RhB coaches, pack of 6 pieces. Model by Kato in N gauge.
In stock: 5 on the shelf, shipped within 1-3 days
Locomotive coupler
In stock: 5 on the shelf, shipped within 1-3 days
Model Receiver for controlling points, signals and uncoupling tracks. The m 83 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 83 has 8 outputs, each of which can be controlled separately or in pairs. The default setting is for controlling up to 4 points. Other functions include switching up to 8 lights (dimmable) with a defined switch-on behaviour (e.g. street lighting, building lighting). An external power feed, e.g. by means of the 66360, can be implemented, only in conjunction with the 60822. The m 83 and m 84 decoders can be connected in any sequence. One 60821 accessory set is required per pair of outputs for motorised drives. The connections are made by means of lift terminals. The maximum current-carrying capacity is 3A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days