Electronics
For the 43200, 43201, 43206, 43210, 43211, 43221, 43226, 43231, 43240, 43300, 43301, 43601, and 43602 coaches. Consisting of a power feed, a lighting strip with lamp sockets, 2 light bulbs, and a current-conducting close coupler.
In stock: 2 on the shelf, shipped within 1-3 days
Model Circuit board with several warm white LEDs (2700k), suitable for the "Donnerbüchsen" coaches with the 4313 / 4314 / 4315 basis in the Märklin H0 programme. Anti-flicker capacitor for consistently bright light integrated. Mounting hardware is included. For "Donnerbüchsen" with the 4313 / 4314 basis (seating coaches) the 73301 power supply is additionally required. For "Donnerbüchsen" with the 4315 basis (baggage coach) the 73302 power supply is additionally required. Highlights Anti-flicker capacitor for consistently bright light integrated Note This product was created in cooperation with the firm Viessmann Modelltechnik GmbH.
In stock: 2 on the shelf, shipped within 1-3 days
Model Power feed for the 73300 interior lighting for "Donnerbüchsen" with the 4313 / 4314 basis (seating coaches). With a pickup shoe and a return spring. Mounting hardware is included. Note This product was created in cooperation with the firm Viessmann Modelltechnik GmbH.
In stock: 2 on the shelf, shipped within 1-3 days
Model Universal circuit board with several LEDs for retrofitting most of the coaches in the Märklin H0 range. A built-in buffer capacitor allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be shortened at several places for shorter coaches. Retaining clips for mounting on the interior details are included. Highlights Bright light in the coach: white LEDs. Flicker-free operation thanks to a buffer capacitor Adjustable brightness for the interior lighting
In stock: 2 on the shelf, shipped within 1-3 days
With radio interference suppression and overload protection. Circuit board with flat plugs for C tracks and red and brown connecting cables. One is required in each conventional circuit. To protect against possible radio interference when locomotives are operated, the 74046 connection set should be installed once in every circuit. In addition, effective protection against overloads and short circuits is ensured, which also responds very quickly with older transformers. The protective functions are retained when there are additional power feeds in the same circuit with the 74042 additional connection. Suitable for 24188 (straight track).
In stock: 2 on the shelf, shipped within 1-3 days
Can be retrofitted to the C track three-way point (24630) with an electric point motor. Digital formats mfx, Motorola, and DCC. Connection by means of plug contacts, for Märklin and Trix C track three-way points. The address can be set both with the coding switch (MM 1–320, DCC 1–511) and via CV (MM 1–320, DCC 1–2044) using the programming track. A point lantern can also be controlled; soldering skills are required for this connection. A digital decoder can be fitted to the electric point motor at the same time or later. The decoder is simply connected with plug contacts and can be addressed individually for each point. The digital power supply can be taken directly from the traction current contact on the point. In this way you get a ready-made digital point that is immediately operational even on portable layouts.
In stock: 2 on the shelf, shipped within 1-3 days
For retrofitting a slim C track double slip point 24720 or Trix 62720. Digital formats mfx, Motorola, and DCC. Connection by means of plug contacts. The address can be set both with the coding switch (MM 1–320, DCC 1–511) and via CV (MM 1–320, DCC 1–2044) using a programming track. A 74477 point lantern (not included in the contents supplied) can also be controlled.
In stock: 2 on the shelf, shipped within 1-3 days
Model The Märklin 74995 flat plug sleeves are the perfect accessory for safe, reliable wiring of your Märklin C track. The high-quality metal sleeves let you make stable electrical connections – quickly, easily and without any additional tools. Suitable for the contact tabs on the C track. For all Märklin cables from 0.19 mm² to 0.75 mm² cross-section. Contents 20 pieces. Highlights Set of 20 flat plug sleeves, specially for the Märklin C track system Easy mounting – slide onto the contacts without tools High conductivity thanks to the robust metal version Reliable power supply for all C tracks (standard, contact and point tracks) Long-lasting and reliable – ideal for the assembly and expansion of any layout
Content: 20 pc. (CHF 0.28 / 1 pc.)
In stock: 2 on the shelf, shipped within 1-3 days
Item no.: 46290
In stock: 2 on the shelf, shipped within 1-3 days
Item no.: 56294
In stock: 2 on the shelf, shipped within 1-3 days
Universal relay with four change-over contacts. Current load per contact: max. 1.5 A. Contents: Relais 2 mounting screws 2 pieces connector (10603)
In stock: 2 on the shelf, shipped within 1-3 days
Suitable for Gauge H0 and TT. The decoder is equipped with the RailCom function. Maximum motor current: 1.0 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
In stock: 2 on the shelf, shipped within 1-3 days
Cable for connecting a Trix Systems Mobile Station to the Sx bus of the previous Selectrix system.
In stock: 2 on the shelf, shipped within 1-3 days
Model Power feed for the retrofit interior lighting 73410 and 73411, consisting of two pickup springs for the electrical connection. Can be used for four-axle coaches with symmetrical bogie mounting. Note The retrofit interior lighting 73400 and 73401 can also be operated with this power feed.
In stock: 2 on the shelf, shipped within 1-3 days
Model Power feed for the retrofit interior lighting 73410 and 73411, consisting of two pickup springs for the electrical connection. Can be used for four-axle coaches with asymmetrical bogie mounting. Note The retrofit interior lighting 73400 and 73401 can also be operated with this power feed.
In stock: 2 on the shelf, shipped within 1-3 days
Item no. 61060 Plug-in set, replacement for Intellibox BASIC, Intellibox II, IB Com, Power 3 (from Oct. 2003), Power 6
In stock: 2 on the shelf, shipped within 1-3 days
Note: The 61080 reversing loop relay is suitable for digital operation only. To switch a reversing loop, the 61080 relay must be connected to an Uhlenbrock booster, e.g. Power 22, 40 or Power 70. To operate several reversing loops, up to seven relays can be connected to one of these boosters. The reversing loops can then also be monitored individually by the feedback modules 63320 or 63340.
In stock: 2 on the shelf, shipped within 1-3 days
Via simple button programming, the address, end stops, and rotation speed for each servo can be set separately using Motorola and DCC command stations.
In stock: 2 on the shelf, shipped within 1-3 days
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.
In stock: 2 on the shelf, shipped within 1-3 days
Double-sided illuminated sign with LED, maintenance free. Suitable e. g. for stations. DB-logo is exchangeable. Offered with 3 different types of printing: 1956 – 1986, 1986 – 1994, as of 1994. Suitable for kibri item 39256 H0 Maintenance hangar Deutsche Bahn, modern. Dimensions: L 1,67 x W 0,33 x H 1,19 cm.
In stock: 2 on the shelf, shipped within 1-3 days
These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 42 LEDs consists of 7 separable segments and has a total length of approx. 250 mm. Each segment is approx. 35 mm long and has 6 warm-white LEDs (2200K). The segments are connected in parallel.
In stock: 2 on the shelf, shipped within 1-3 days
These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 55 LEDs consists of 11 separable segments and has a total length of approx. 175 mm. Each segment is approx. 15.4 mm long and has 5 warm-white LEDs (2200K). The segments are connected in parallel.
In stock: 2 on the shelf, shipped within 1-3 days
The circuit board with 8 white, maintenance free LEDs can be shortened. Constant power supply integrated, prepared for flicker-protection. Uniform illumination by small LED distance can be used in any coach of all manufacturers designed to be equipped with lighting. Suitable for DC, AC or digital power. Maximum power input 30 mA. Dimensions: L 13,2 x W 0,9 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Traffic lights suitable for epochs III - VI. Each set contains 2 traffic lights, each with a red, yellow and green LED for road traffic and a red and green LED for pedestrians. Suitable for crosswalks as e. g. zebra crossings. Prototypical filigree brass mast with base socket for easy mounting. Maintenance free by LED lighting. Attached electronics controls both traffic lights in an automatic sequence. Height: 6 cm.
In stock: 2 on the shelf, shipped within 1-3 days