Electronics
Function decoder without sound, usable regardless of gauge. 2 function outputs, up to 100 mA each Effects: dimming, flashing, direction-dependent switching DCC and Motorola protocols with automatic detection Can supplement a locomotive decoder without RailCom as a RailCom transmitter Addresses: DCC up to 10239, Motorola up to 255 Dimensions: 12.5 × 9.5 × 3.3 mm
In stock: 2 on the shelf, shipped within 1-3 days
Load-regulated locomotive decoder without sound for H0 and TT gauge. NEM 652 interface (8-pin) DCC (NMRA) and Märklin Motorola protocols (old and new) Short and long addresses up to 10239, 14, 28 or 128 speed steps Motor current up to 1.1 A, total load 1.2 A in digital operation 2 light outputs (150 mA each, dimmable) and 2 function outputs (300 mA each) Short-circuit protection Dimensions: approx. 24.6 × 14.0 × 2.9 mm
In stock: 2 on the shelf, shipped within 1-3 days
Compact blinker unit which could be mounted directly into the vehicles. The LEDs blink separately. Operation with only one LED is possible. Easy wiring due to wires already soldered to the LEDs. Dimensions Electronics: L 2,5 x W 0,4 x H 0,3 cm, LED: L 0,16 x W 0,08 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Compact blinker unit which could be mounted directly into the vehicles. The LEDs blink separately. Operation with only one LED is possible. Easy wiring due to wires already soldered to the LEDs. Dimensions Electronics: L 2,5 x W 0,4 x H 0,3 cm, LED: L 0,16 x W 0,08 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Feedback compatible push-button panel with impulse-contact for four semaphore signals with 2 aspects, tracks or universal relay, item 5551. Authentic feedback of the signals, tracks or relays by 8 red and green LEDs. Several panels can be stringed together. Only useable for signals with automatic deactivation via mechanical contacts. Contact load: 2 A.
In stock: 2 on the shelf, shipped within 1-3 days
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
In stock: 2 on the shelf, shipped within 1-3 days
Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage: 14 – 16 V AC/DC. The sound module has a control input for motion-synchronized sounds. Suitable for: Wood choper item 1515.
In stock: 2 on the shelf, shipped within 1-3 days
Ideal illumination for the kibri cube houses, items 38336 – 38339 made of Polyplate. Content: 4 warm-white, 3 white and 1 yellow LED. 1 diode and 1 resistor, 2 IC plugs. Perfect for connection to the Viessmann LED dimmer, item 5590.
In stock: 2 on the shelf, shipped within 1-3 days
Perfect house illumination for all kinds of buildings. 2 LEDs on one thin board to fasten under the roof, maintenance free. Suitable for house illumination starter set item 6005.
In stock: 2 on the shelf, shipped within 1-3 days
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Modern light fits to modern areas and parks. Height: 5,8 cm.
In stock: 2 on the shelf, shipped within 1-3 days
This basic wall lamp is ideal for storage buildings, sheds and depots for the epoch III. Maintenance free by LED lighting.
In stock: 2 on the shelf, shipped within 1-3 days
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 2,9 cm, 1 cm and 1,2 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Length of wire: ca. 2 cm.
In stock: 2 on the shelf, shipped within 1-3 days
The prototype of this lamp is located in Wallau station in Hesse. This lantern with its filigree latticed brass mast and the shade of a cantilevered streetlight is best suited for lighting of platforms and other areas of a station as from epoch III. Height: 12,3 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. Height: 7 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. Lamps that are suspended on ropes between poles or buildings are used at many stations and inner city areas. Thus this lamp can be used for lighting a shopping mall or main street with tram tracks at the centre or for lighting a railway yard with several tracks and catenary masts. Length: 1,6 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. Height: 14 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. For wall mounting.
In stock: 2 on the shelf, shipped within 1-3 days
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 5,6 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. With base socket for easy mounting. Height: 3,6 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. For wall mounting. Length: 1,1 cm, Height: 1,8 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. For wall mounting. Length: 1,7 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Street light epochs III – VI. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Height: 5,4 cm.
In stock: 2 on the shelf, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Height: 3,3 cm.
In stock: 2 on the shelf, shipped within 1-3 days