Electronics
The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.
On order, shipped within 10-15 days
This controller is designed for special applications, e.g. for installation in track diagram control panels. With increased running current, while at the same time generating less waste heat than its predecessor. Features: max. 5 A running current / built-in rectifier / suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 100 x 80 x 90 mm.
On order, shipped within 10-15 days
Connecting cable for connecting the MZS Power Booster to the Märklin CS2 to increase power.
On order, shipped within 10-15 days
Reversing loop module for the digital LGB system world. Switch the reversing loop on your digital layout automatically and without short circuits. In doing so, you protect your digital system and of course your rolling stock. An additional advantage of the reversing loop module: several reversing loops can be used on the layout at the same time. Conventional reversing loop modules generate a short circuit when the train enters and, by means of a voltage dip, force the polarity of the track to be reversed, e.g. the 55080. The MZS reversing loop module, by contrast, switches without short circuits; an interruption of the voltage on the track is prevented. Overloading of the MZS central unit by the deliberately generated short circuit is thus a thing of the past. Above all, this protects track components such as locomotive decoders, point decoders and the electronics usually installed in locomotives and wagons. Compatible with the previous components. Notes: Suitable to a limited extent for analogue operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm.
On order, shipped within 10-15 days
Model Adapter board for plugging the new 55029 large-scale decoder into the Märklin 60971 decoder programmer. Easy connection to a PC/laptop. In addition, the Märklin Decoder Tool software is required, which can be conveniently downloaded from the Märklin homepage (www.maerklin.de under Service/Downloads/Nachrüstdecoder/mLD3/mSD3). It can be used to easily transfer existing or self-recorded sounds; other settings such as maximum speed, braking behaviour, etc. can also be programmed very easily and quickly with it. Note The Märklin 60971 decoder programmer is also required. It is not included.
On order, shipped within 10-15 days
Model Energy storage unit for connection to the 55029 large-scale decoder or the identical decoders in almost all LGB locomotives built from 2018. Equipped with this energy storage unit, locomotives can cross small sections without power with no problem. It simply plugs into the decoder. Size 36 mm x 24 mm x 23 mm, cable length 200 mm. Highlights For bridging short sections without power
On order, shipped within 10-15 days
With this point decoder, the control commands for up to four LGB solenoid accessories can be transmitted easily via the tracks. Power is drawn directly from the track, which avoids long, complicated wiring. This point decoder is thus ideal for controlling points and signals out on the line or at more distant locations on your LGB layout. Features: four control outputs / adjustable mode for each output: normal (for points and signals), synchronous blinking (for lamps), asynchronous blinking (for lamps), on/off (for lamps and accessories) / adjustable switching duration for normal, synchronous and asynchronous. Suitable for the CS 2 and CS 3 as well as MZS III. The DCC, mfx and MM formats are supported.
On order, shipped within 10-15 days
This interface adapter makes it possible to install the new 27-pin 55029 decoder in earlier MZS vehicles with the old 10-pin interface.
On order, shipped within 10-15 days
These plastic clamps allow you to make an insulated connection between two LGB 56201 catenary wires.
On order, shipped within 10-15 days
These brass catenary wire clamps are used to make an electrically conductive connection between two LGB 56201 catenary wires.
On order, shipped within 10-15 days
This cable allows you to electrify your catenary.
On order, shipped within 10-15 days
Now you can retrofit your LGB locomotive with digital sound! The module combines the sound electronics, volume control and loudspeaker in a small housing (60 x 68 x 23 mm). The module is so small that it fits easily into most LGB goods wagons and coaches and even into the cabs of many LGB locomotives. Simply connect two cables to the track voltage or to the multi-purpose socket of a locomotive, and you can enjoy the digital LGB sound. The module offers the real sound of the steam exhaust of a prototype steam locomotive. With the LGB Multi-Train System you can activate further sound functions by remote control, such as the bell, whistle, brake sound and platform announcement. All LGB sound modules are equipped with an MZS sound decoder and are thus prepared for operation with the Multi-Train System. In analogue operation, the standing sound power supply (LGB 65011) can be retrofitted in order to hear the standing sounds. With the sound module function trigger (LGB 65012), the bell and whistle can be triggered by track magnets. Note: LGB sound modules are specially designed for easy self-installation in a wagon or the cab of a locomotive. For this reason, our LGB service stations cannot retrofit these and other sound modules.
On order, shipped within 10-15 days
Sound module like LGB 65000, but with the typical sounds of an American steam locomotive. See also LGB 65000, 65001, 65002, 65003, 65004, 65011 and 17050.
On order, shipped within 10-15 days
Sound module like LGB 65000, but with the typical sounds of a European electric locomotive. See also LGB 65000, 65001, 65002, 65003, 65004, 65011 and 17050.
On order, shipped within 10-15 days
Vehicle-specific sound retrofit kit for the locomotive models of the 2x52x series equipped with an MZS decoder. The retrofit kit brings the prototypical diesel sound into your LGB locomotive. It has the following digital electronic sounds: Diesel engine. Electric traction motors. Signal horn and whistle (before departure at level crossings). Announcement by the guard (with MZS). Brake sounds, applying and releasing the brakes. Standing sounds (in MZS operation, idling and pressure relief valve when stationary). Remote control of the sound functions (with the MZS system). Magnet-controlled triggering of the whistle and signal horn (magnet not included). The set contains the complete conversion kit with all necessary parts, consisting of: LGB sound module with volume control. Connecting cable. High-quality loudspeaker. Complete mounting material. Installation instructions. Operating instructions.
On order, shipped within 10-15 days
High-energy storage unit for supplying power to the sound module (LGB 65000-65004) in analogue operation when the transformer is switched off. The stationary sounds can thus be heard after stopping. This power supply is not required in digital operation.
On order, shipped within 10-15 days
This chimney is equipped with a smoke generator. Components for retrofitting many older locomotives, for example also from the starter sets, are included.
On order, shipped within 10-15 days
This chimney is equipped with a smoke generator. Components for retrofitting many older locomotives from the starter sets are included.
On order, shipped within 10-15 days
Kobel chimney, 18 volts
On order, shipped within 10-15 days
For some locomotives equipped with MZS decoders. White/white cable.
On order, shipped within 10-15 days
Chimney insert, 18 volts
On order, shipped within 10-15 days
This smoke generator fits in many LGB locomotives with voltage limitation. Black/white cable.
Pre-order, release expected in December 2026
Mount this prototypical lantern at the rear of your train. With lighting for night operation and a warning marker for daytime operation. A light bulb and cable are included.
On order, shipped within 10-15 days
For lighting your American train at night. Mount these lamps on your LGB caboose from the LGB 4065, 4075 and 4079 series. Light bulbs and sockets are included.
Content: 2 pc. (CHF 12.75 / 1 pc.)
On order, shipped within 10-15 days