Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
Track-Control 2 cross-connection boards
Uhlenbrock 69210
Track-Control 2 cross-connection boards

Item no. 69210 2 cross-connection boards with illumination

Selling price: CHF 23.90 RRP CHF 26.10

On order, lead time to be confirmed

11% off the recommended price
Track-Control 4 connection boards without illumination
Uhlenbrock 69212
Track-Control 4 connection boards without illumination

Item no. 69212 4 connection boards without cut-outs

Selling price: CHF 25.90 RRP CHF 29.30

On order, lead time to be confirmed

Track-Control 2 connection boards with illumination
Uhlenbrock 69214
Track-Control 2 connection boards with illumination

Item no. 69214 2 connection boards with illumination

Selling price: CHF 17.90 RRP CHF 19.60

On order, lead time to be confirmed

11% off the recommended price
Track-Control point board
Uhlenbrock 69220
Track-Control point board

Turnout board for the Track-Control track diagram control panel. For switching turnouts, double slip turnouts, single slip turnouts, three-way turnouts, lighting and uncouplers. The key controls up to two solenoid accessory addresses.

Selling price: CHF 24.90 RRP CHF 28.20

On order, lead time to be confirmed

11% off the recommended price
Track-Control signal board
Uhlenbrock 69230
Track-Control signal board

Signal board for the Track-Control track diagram control panel. For switching digitalised signals, including multi-aspect signals. Plug-in system, no wiring required.

Selling price: CHF 25.90 RRP CHF 29.30

On order, lead time to be confirmed

11% off the recommended price
Track-Control route memory
Uhlenbrock 69240
Track-Control route memory

Item no. 69240 Track-Control route memory

Selling price: CHF 32.90 RRP CHF 37.00

On order, lead time to be confirmed

10% off the recommended price
Track-Control train number display
Uhlenbrock 69250
Track-Control train number display

When using the locomotive-specific control system "LISSY" or the modular automation for RailCom "MARCo", the train numbers of trains passing the assigned LISSY sensor or the MARCo track section are displayed. This can occur, for example, on the departure track of a station.

Selling price: CHF 44.90 RRP CHF 50.00

On order, lead time to be confirmed

11% off the recommended price
Track-Control 3-button segment
Uhlenbrock 69260
Track-Control 3-button segment

By combining three buttons into one segment, you save space and have greater flexibility in designing the control panel. With this affordable module, all additional functions on the model railway layout can be controlled, such as lighting, barriers, gate motors, the lifting magnet of a jib crane, a water crane, and much more. Routes can also be set via the buttons.

Selling price: CHF 32.90 RRP CHF 37.00

On order, lead time to be confirmed

Track-Control signal interface board for left-hand running
Uhlenbrock 69280
Track-Control signal interface board for left-hand running

Item no. 69280 Left-running signal board

Selling price: CHF 28.90 RRP CHF 31.60

On order, lead time to be confirmed

10% off the recommended price
Track-Control speed controller
Uhlenbrock 69300
Track-Control speed controller

The speed controller is as large as three control panel segments and can be easily integrated into the track layout control panel. Up to 9999 locomotives can be selected and controlled using the numeric keys f0–f9.

Selling price: CHF 87.90 RRP CHF 97.80

On order, lead time to be confirmed

DigiTest
Uhlenbrock 71000
DigiTest

DigiTest is the new universal test and programming device for all decoders, sound modules and sound decoders. DigiTest is a stand-alone test device that is connected to a computer via a USB port. A digital command station is not required. It offers you the following functions: Testing of all DCC-capable decoders, sound decoders and sound modules Reading and programming of CVs Loading of new software versions into IntelliDrive 2 decoders and Piko V4.1 decoders All functions are conveniently monitored and carried out on the PC. DigiTest has a large number of connections so that all decoders can be tested. Programming track 6-pin (NEM 651) 8-pin (NEM 652) Next 18 (RCN-118) Next 18S (RCN-118) PluX (RCN-122) 21mtc (RCN-121) Terminal connection SUSI microSUSI As you can see, DigiTest also has a programming track connection. On a track connected to it, the CVs of decoders installed in vehicles can be read and programmed. Sound files can also be loaded into IntelliSound modules and decoders while installed, on the programming track, if an IntelliDrive 2 decoder is installed in the vehicle. On the programming track the IntelliDrive 2 decoders can also receive new software. Required operating system: Microsoft Windows 7, 8, 10 Art. no. 71000 DigiTest – Test and programming device with plug-in power supply

Selling price: CHF 179.00 RRP CHF 198.60

On order, lead time to be confirmed

10% off the recommended price
SUSI distribution unit
Uhlenbrock 71100
SUSI distribution unit

SUSI distributor, 70 mm. This allows two sound modules to be connected to one decoder. The distributor can also be used as a connection extension.

Selling price: CHF 10.90 RRP CHF 12.20

On order, lead time to be confirmed

5 NEM 652 interface sockets
Uhlenbrock 71621
5 NEM 652 interface sockets

Item no. 71621 5 NEM 652 interface sockets

Selling price: CHF 9.30 RRP CHF 10.30

On order, lead time to be confirmed

5 NEM 652 interface plugs
Uhlenbrock 71651
5 NEM 652 interface plugs

Item no. 71651 5 interface plugs to NEM 652

Selling price: CHF 7.40 RRP CHF 8.20

On order, lead time to be confirmed

11% off the recommended price
PluX-22 connection board
Uhlenbrock 71680
PluX-22 connection board

Connection board for the retrofitting of PluX decoders (PluX 8 and PluX 22) in locomotives with a DC motor. With connection option for SUSI and LISSY.

Selling price: CHF 9.90 RRP CHF 11.20

On order, lead time to be confirmed

Energy buffer 1 x 1F
Uhlenbrock 71810
Energy buffer 1 x 1F

IntelliDrive 2 energy store 1 F. The IntelliDrive energy stores bridge power interruptions caused by dirty rails and long turnout sequences. This means there is no more jerky running on dirty rails or when passing over turnout sequences. The sound no longer has dropouts either. The energy store can be used with all common decoders that have decoder ground GND and U+ (+20 V) connections after the rectifier. The charging circuit is controlled by a microprocessor, so there is no overload of the booster when the layout is switched on. All parameters can be set by CV programming. The energy store should be given the same address as the locomotive decoder. The 71810 is intended for locomotives with low current consumption. Size 17.5 x 12.5 x 8.5 mm.

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 decoder, Next18
Uhlenbrock 73236
ID2 decoder, Next18

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73236 ID2 Decoder, Next18

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 N-TT decoder with lead wires
Uhlenbrock 73300
ID2 N-TT decoder with lead wires

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73300 Decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 N-TT Decoder with leads, PluX 12
Uhlenbrock 73340
ID2 N-TT Decoder with leads, PluX 12

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73340 Decoder, microSUSI, Multi, DC, control, PluX 12

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 minidecoder, lead wires
Uhlenbrock 73406
ID2 minidecoder, lead wires

The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73106), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73406 Mini decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 minidecoder, 6-pin NEM651
Uhlenbrock 73416
ID2 minidecoder, 6-pin NEM651

The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73105), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73416 Mini decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

10% off the recommended price
Mini function decoder
Uhlenbrock 73700
Mini function decoder

The functions: Six function outputs All outputs can be switched, flashed and dimmed depending on the direction of travel and on time Function mapping up to F44 On and off times for flashing outputs can each be set separately Second brightness level (dimming) switchable via function key Fade-in and fade-out outputs with adjustable fade time Adjustable neon lamp effect, energy-saving lamps, coupling control, PWM modulation programmable (e.g. Gyrolight, Marslight, etc.) RailCom Plus Data formats DCC and Motorola II Connection via cable + solder pads Programmable via CV (DCC) and via Motorola digital command station Load capacity up to 0.6 A, 0.6A per output Size 9.5 x 7.8 x 2.4 mm

Selling price: CHF 21.90 RRP CHF 24.50

On order, lead time to be confirmed

IntelliDrive 2 8-pin digital decoder
Uhlenbrock 74120
IntelliDrive 2 8-pin digital decoder

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

10% off the recommended price
IntelliDrive 2 8-pin digital decoder with mfx
Uhlenbrock 74125
IntelliDrive 2 8-pin digital decoder with mfx

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 31.90 RRP CHF 35.70

On order, lead time to be confirmed