Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
USB LocoNet interface without LocoNet tool
Uhlenbrock 63130
USB LocoNet interface without LocoNet tool

The LocoNet interface is compatible with all LocoNet digital command stations without a computer connection, such as the DAISY or the Märklin Control Unit with the 6021 infrared and LocoNet adapter. The interface is connected to a USB port on a computer. It is ideally suited for automatic layout control.

Selling price: CHF 77.90 RRP CHF 86.40

On order, lead time to be confirmed

10% off the recommended price
Power 22
Uhlenbrock 63210
Power 22

The new generation of boosters On model railway layouts with a lot of running, the command station's output is soon used up. To run a larger number of vehicles, a booster is needed. The new-generation boosters are powered by switched-mode power supplies, which are included in the delivery. The LocoNet-capable boosters Power 22, Power 40 and Power 70 are powerful multi-protocol boosters. Multi-protocol means that they can be used in 2-rail and 3-rail operation for the data formats DCC, Motorola, mfx, Selectrix and FMZ. If the boosters are operated with an Intellibox II, any error messages are shown in plain text on the Intellibox display. The features of all boosters Multi-protocol booster for the data formats DCC, Märklin-Motorola, mfx, Selectrix and FMZ Switchable to DCC braking generator mode LocoNet-capable, and therefore particularly suitable for modular layouts You can operate up to seven reversing loops, each connected to a reversing loop relay. In DCC systems, they can also be used as a braking generator. Depending on the preset deceleration of the decoders used, the locomotives brake true to prototype in stopping zones. You can connect as many braking sections as you like. With output for reversing loop relay RailCom support Short-circuit-proof, overload-proof Settings via LocoNet CVs Compatible with the ABC braking system The inexpensive 2.2 A booster for N, TT and H0 gauge Compatible with all LocoNet command stations, particularly suitable for DAISY II and Piko SmartControl light Maximum output current: 2.2 A LocoNet B connection Settings via LocoNet CVs Output voltage 15 V

Selling price: CHF 146.00 RRP CHF 162.40

On order, lead time to be confirmed

Power 40
Uhlenbrock 63220
Power 40

The new generation of boosters On model railway layouts with a lot of running, the command station's output is soon used up. To run a larger number of vehicles, a booster is needed. The new-generation boosters are powered by switched-mode power supplies, which are included in the delivery. The LocoNet-capable boosters Power 22, Power 40 and Power 70 are powerful multi-protocol boosters. Multi-protocol means that they can be used in 2-rail and 3-rail operation for the data formats DCC, Motorola, mfx, Selectrix and FMZ. If the boosters are operated with an Intellibox II, any error messages are shown in plain text on the Intellibox display. The features of all boosters Multi-protocol booster for the data formats DCC, Märklin-Motorola, mfx, Selectrix and FMZ Switchable to DCC braking generator mode LocoNet-capable, and therefore particularly suitable for modular layouts You can operate up to seven reversing loops, each connected to a reversing loop relay. In DCC systems, they can also be used as a braking generator. Depending on the preset deceleration of the decoders used, the locomotives brake true to prototype in stopping zones. You can connect as many braking sections as you like. With output for reversing loop relay RailCom support Short-circuit-proof, overload-proof Settings via LocoNet CVs Compatible with the ABC braking system The universal 3.5 A booster for Z, N, TT, H0 and 0 gauge Compatible with command stations from Uhlenbrock, Märklin, Fleischmann, Piko, KM1, Lenz, ESU, Viessmann and many others Selectable output voltage Maximum output current: 3.5 A Connections: LocoNet B, DCC booster (CDE), Märklin booster Settings via switches and via LocoNet CV programming The output voltage can be selected on the switched-mode power supply. 17 V for H0 3-rail (Märklin) and 0 gauge 15 V for N, TT, H0 gauge 11 V for Z gauge

Selling price: CHF 176.00 RRP CHF 195.10

On order, lead time to be confirmed

10% off the recommended price
Power 70
Uhlenbrock 63230
Power 70

The new generation of boosters On model railway layouts with a lot of running, the command station's output is soon used up. To run a larger number of vehicles, a booster is needed. The new-generation boosters are powered by switched-mode power supplies, which are included in the delivery. The LocoNet-capable boosters Power 22, Power 40 and Power 70 are powerful multi-protocol boosters. Multi-protocol means that they can be used in 2-rail and 3-rail operation for the data formats DCC, Motorola, mfx, Selectrix and FMZ. If the boosters are operated with an Intellibox II, any error messages are shown in plain text on the Intellibox display. The features of all boosters Multi-protocol booster for the data formats DCC, Märklin-Motorola, mfx, Selectrix and FMZ Switchable to DCC braking generator mode LocoNet-capable, and therefore particularly suitable for modular layouts You can operate up to seven reversing loops, each connected to a reversing loop relay. In DCC systems, they can also be used as a braking generator. Depending on the preset deceleration of the decoders used, the locomotives brake true to prototype in stopping zones. You can connect as many braking sections as you like. With output for reversing loop relay RailCom support Short-circuit-proof, overload-proof Settings via LocoNet CVs Compatible with the ABC braking system The powerful 6.8 A booster for 0, I and IIm (G) gauge Compatible with command stations from Uhlenbrock, Märklin, Fleischmann, Piko, KM1, Lenz, ESU, Viessmann and many others Selectable output voltage Maximum output current: 6.8 A Connections: LocoNet B, DCC booster (CDE), Märklin booster Settings via switches and via LocoNet CV programming The output voltage 16 V, 18 V or 22 V can be selected on the switched-mode power supplies. 17 V for H0 3-rail (Märklin) and 0 gauge 15 V for N, TT, H0 gauge 11 V for Z gauge

Selling price: CHF 253.00 RRP CHF 281.30

On order, lead time to be confirmed

10% off the recommended price
LocoNet feedback module for 2-rail track
Uhlenbrock 63320
LocoNet feedback module for 2-rail track

The function of feedback modules Feedback modules pass on the information from the track occupancy detector, indicating whether a vehicle is present in the track sections they monitor, to the connected devices (e.g. IB-Switch) or to a computer control program. These automatically execute the switching command that has been stored for this feedback. This may involve switching a single solenoid accessory or an entire route. The 2-rail feedback modules consist of an occupancy detector, a feedback unit and a voltage monitor. The occupancy detectors monitor the track inputs. The current monitor registers any current flow in the isolated section that is greater than 3 mA. This detects locomotives, illuminated coaches and conductive axles. The voltage monitor prevents an erroneous "clear" message from being given when the power is switched off. The 3-rail version works with an isolated and separated rail side, which is connected to the detector module and is connected to ground via the conductive axles of the vehicles. The feedback module reports every change of state, "clear" or "occupied", via LocoNet to the command station and to other LocoNet devices. In contrast to other bus systems, LocoNet is extremely reliable and dependable for transmitting information such as feedback messages. The address is set via a programming button, via the programming menu of the Intellibox or, very conveniently, via the LocoNet-Tool software.

Selling price: CHF 87.90 RRP CHF 97.80

On order, lead time to be confirmed

10% off the recommended price
LocoNet feedback module for 3-rail track
Uhlenbrock 63330
LocoNet feedback module for 3-rail track

The function of feedback modules Feedback modules pass on the information from the track occupancy detector, indicating whether a vehicle is present in the track sections they monitor, to the connected devices (e.g. IB-Switch) or to a computer control program. These automatically execute the switching command that has been stored for this feedback. This may involve switching a single solenoid accessory or an entire route. The 2-rail feedback modules consist of an occupancy detector, a feedback unit and a voltage monitor. The occupancy detectors monitor the track inputs. The current monitor registers any current flow in the isolated section that is greater than 3 mA. This detects locomotives, illuminated coaches and conductive axles. The voltage monitor prevents an erroneous "clear" message from being given when the power is switched off. The 3-rail version works with an isolated and separated rail side, which is connected to the detector module and is connected to ground via the conductive axles of the vehicles. The feedback module reports every change of state, "clear" or "occupied", via LocoNet to the command station and to other LocoNet devices. In contrast to other bus systems, LocoNet is extremely reliable and dependable for transmitting information such as feedback messages. The address is set via a programming button, via the programming menu of the Intellibox or, very conveniently, via the LocoNet-Tool software.

Selling price: CHF 67.90 RRP CHF 76.00

On order, lead time to be confirmed

10% off the recommended price
LocoNet switching module
Uhlenbrock 63410
LocoNet switching module

The inexpensive replacement for solenoid accessory and switching decoders, with outstanding capabilities The LocoNet switching module is a switching and solenoid accessory decoder with a LocoNet connection and switches up to ten points or colour light signals, including multi-aspect ones with slow fade-in and fade-out, or up to 20 lights on your layout. And all of this mixed on a single module. Our LocoNet switching module is a true all-rounder. A single module with which you carry out all the switching operations on your layout. With the switching module you can switch lighting, points, uncoupling tracks, semaphore signals, colour light signals, effect lighting and St Andrew's crosses. All these switching tasks can be distributed as you wish across the 20 switching outputs. We have placed particular emphasis on prototypical control of colour light signals. The switching module switches main signals and distant signals with up to 4 aspects. And the clever part of the signal control is the cross-fade function. The change of light takes place, if you wish, not abruptly but with a smooth cross-fade from one signal aspect to the other. St Andrew's crosses and other effect lighting are no problem either. With a flasher generator and the cross-fade function you can create a prototypical level crossing cross. Or combine both flasher generators to make a switchable faulty street lamp. With the module's 20 switching outputs you can operate up to ten points, five multi-aspect signals or 20 switching functions. Each output can be loaded with up to 1 A, but the total load must not exceed 3 A. The LocoNet switching module is supplied with power by a separate transformer and does not load the LocoNet or the digital command station. Art. no. 63410 LocoNet switching module

Selling price: CHF 87.90 RRP CHF 97.80

On order, lead time to be confirmed

Polarity changer
Uhlenbrock 63415
Polarity changer

The LocoNet switching module (63410) has a common positive terminal for all consumers. Connecting two motorised point motors or colour light signals with a common negative terminal is not possible. Motorised point motors require an operating voltage with alternating polarity.

Selling price: CHF 21.90 RRP CHF 23.90

On order, lead time to be confirmed

10% off the recommended price
LocoNet analogue switching module
Uhlenbrock 63420
LocoNet analogue switching module

The LocoNet analogue switching module is a variant of our LocoNet switching module. An analogue switching module can be configured for: 10 points and 2 handle-operated semaphore signals (momentary contact), 10 colour light signals (maintained contact), 20 switching outputs. Up to 20 analogue switching modules can be operated on one Track-Control.

Selling price: CHF 107.00 RRP CHF 119.10

On order, lead time to be confirmed

10% off the recommended price
LocoNet servo module
Uhlenbrock 63500
LocoNet servo module

4 adjustable holding positions and rotational speed; 4 holding positions per servo switchable via 2 addresses. Switching outputs for lighting, colour and semaphore signals, points, St Andrew's crosses or common crossing polarisation with additional relay. Each output can be configured as a continuous or momentary output.

Selling price: CHF 48.90 RRP CHF 54.40

On order, lead time to be confirmed

10% off the recommended price
LocoNet USB and Wi-Fi interface
Uhlenbrock 63860
LocoNet USB and Wi-Fi interface

It is now possible to connect LocoNet to your computer network or to control the model railway layout directly using your mobile phone or tablet via Wi-Fi.

Selling price: CHF 107.00 RRP CHF 119.10

On order, lead time to be confirmed

DAISY II DCC digital set
Uhlenbrock 64300
DAISY II DCC digital set

The DAISY II digital starter set is a digital entry-level system for the ambitious model railway enthusiast. It consists of a DAISY II hand controller and a DCC Central Station, which are connected to each other via a LocoNet cable. It supports all the functions desirable for comfortable model railway operation.

Selling price: CHF 249.00 RRP CHF 276.20

On order, lead time to be confirmed

DAISY II radio set
Uhlenbrock 64400
DAISY II radio set

Future-proof! The radio system can be expanded via software. With the expansions, it is possible to control vehicles with corresponding radio receivers directly in DCC format via the radio master. The DCC command no longer needs to be transmitted to the locomotive via the track. This allows, for example, the locomotives of the garden railway or the vehicles of the Faller Car System to be controlled directly.

Selling price: CHF 498.00 RRP CHF 553.30

On order, lead time to be confirmed

Upgrade Software 2.0
Uhlenbrock 65020
Upgrade Software 2.0

Extension of the system software for the Intellibox and Intellibox IR Upgrade 2.0 is an extension for all Intelliboxes with article numbers 650, 65 000 and 65 050 that were delivered with a system software version lower than 2.0. It provides the following new functions: 10 000 special locomotive functions With suitable DCC decoders, the special functions f0–f9 999 can be accessed. Locomotive selection from the refresh cycle The refresh cycle contains all locomotive addresses that are currently being supplied with digital information by the Intellibox. The new software provides a selection list of these addresses from which the desired locomotive can be selected directly. Lokfind function As soon as a locomotive with a DCC decoder is placed on the programming track, the decoder's locomotive address is automatically transferred to a speed controller. Reloading the locomotive addresses The locomotive addresses shown on the Intellibox display are, if desired, saved when the operating voltage is switched off and are immediately available again for the next running session without annoying re-entry. Halt mode The Intellibox can be put into halt mode using the STOP and GO buttons. All locomotives are stopped by emergency stop, while the track voltage is maintained. Points and signals can still be changed. Using the Intellibox as an IB-Control The Intellibox can be set via the device configuration so that it behaves like an IB-Control. This makes it possible to use two Intelliboxes together on one layout. Route control On all devices without route control, the system software is additionally extended with the ability to switch up to 48 routes. mfx special functions mfx locomotives are controlled via the Intellibox using the Motorola data format. If a locomotive has more than four special functions, the special functions f5–f8 are automatically controlled via the following decoder address. The upgrade software is available free of charge on the Internet for owners of the Intellibox IR. For older devices the software can be purchased. Art. no.: 65020 Upgrade Software 2.0

Selling price: CHF 26.90 RRP CHF 29.60

On order, lead time to be confirmed

10% off the recommended price
RailCom extension for Intellibox, IR
Uhlenbrock 65030
RailCom extension for Intellibox, IR

Suitable devices for the RailCom extension 65030 Intellibox I art. no. 650 and 65000 Intellibox IR art. no. 65050 Intellibox Basic art. no. 65060 IB-COM art. no. 65070 and 65071 Power 3 art. no. 656 and 65600 Power 6 art. no. 65650 Fleischmann Twin-Center art. no. 6802 Fleischmann Twin-Booster art. no. 6807 Piko Power Box art. no. 55015 The RailCom extension 65030 is a circuit board (not illustrated) that is retrofitted to the digital command stations listed above. It ensures that the cutout required for RailCom operation is also transmitted. Installation is only possible at our factory. The device must therefore be sent to us for modification. Attention: for installation, the digital command station must be sent to us. Postage costs for returning the modified command station to you are charged in addition. Art. no. 65030 RailCom extension

Selling price: CHF 63.90 RRP CHF 71.20

On order, lead time to be confirmed

10% off the recommended price
DAISY II Central Station with switched-mode power supply
Uhlenbrock 65210
DAISY II Central Station with switched-mode power supply

The DAISY II Central Station is a compact LocoNet DCC central station for the model railway enthusiast. It is now available in a new, improved version with higher output power and compatibility with the ABC braking system.

Selling price: CHF 129.00 RRP CHF 143.70

On order, lead time to be confirmed

Intellibox 3
Uhlenbrock 65300
Intellibox 3

Intellibox 3 Proven features combined with innovative technology In appearance, the large, high-resolution colour display with touch function stands out. With the new operating options we have strictly continued and simplified the operating concept. Anyone who knows the Intellibox II will immediately feel at home with the Intellibox 3. It goes without saying that you can continue to use our previous devices in conjunction with the Intellibox 3. The speed display of the vehicles can be shown in speed steps, as a percentage of top speed and also in km/h. Up to 32 768 special functions per locomotive address can be switched. In combination with LISSY or MARCo, you can have the position of your train on the layout displayed. Another highlight is decoder programming in plain text. For programming the standard CVs in DCC format, the annoying search for the locomotive decoders' operating instructions is therefore no longer necessary. The bit calculation aid simplifies the programming of special CVs. The detailed help function, a model time clock and a booster mode complete the Intellibox 3's range of features. As ever: everything in one box With the Intellibox 3 you are completely equipped for digital operation. The Intellibox 3 can be operated on 2-rail and 3-rail layouts. From gauge Z, via N, TT and H0, right up to the large gauges 0, 1 and IIm(G), the Intellibox 3 is the right command station. It supports up to 128 speed steps and 9 999 decoder addresses. Locomotive and function decoders in DCC, mfx®, Motorola or Selectrix® format. Point and switching decoders in Motorola or DCC format from different manufacturers can be used at the same time. A single device provides you with the following components of a digital system: central unit, booster, two speed controllers, keyboard, programmer, interface, feedback monitor, route control, model time clock, RailCom® receiver, computer connection via USB or WLAN and the LISSY/MARCo mode with the DirectDrive function. The integrated infrared receiver allows direct use of the existing IRIS infrared remote control. Art. no. 65300 Intellibox 3

Selling price: CHF 698.00 RRP CHF 775.10

On order, lead time to be confirmed

IB-Control 3
Uhlenbrock 65430
IB-Control 3

Is your command station too far from the shunting yard? Would you like to have more locomotives permanently at hand? Do you need more routes? You need the IB-Control 3 Fine prospects The new IB-Control 3, as an additional control unit, turns any LocoNet command station into a modern control system with all the operating convenience possible today. It extends any command station with two further speed controllers with locomotive selection via locomotive names stored in a database, a control panel with symbols for points and signals, as well as monitoring options for feedback detectors and LISSY/MARCo receivers and a model time clock. Each IB-Control 3 extends the digital control by 128 routes with 40 entries each, which can be called up at the press of a button or triggered by feedback from the train. The routes can be interlocked with one another. With the large, high-resolution colour display with touch function and a backlit keyboard in night design, model railway fun with the new IB-Control 3 for all LocoNet command stations is only now really getting started. Art. no. 65430 IB-Control 3

Selling price: CHF 498.00 RRP CHF 553.30

On order, lead time to be confirmed

DAISY II hand controller
Uhlenbrock 66300
DAISY II hand controller

The DAISY II radio hand controller is suitable for operation with all central units featuring a LocoNet connection. It can be plugged directly into the LocoNet to operate via a wired connection, or wirelessly with a radio master which is connected to the central unit via LocoNet. The range of the DAISY II radio hand controller is up to 100 m (open field) to the nearest radio master.

Selling price: CHF 159.00 RRP CHF 176.40

On order, lead time to be confirmed

DAISY II radio module
Uhlenbrock 66310
DAISY II radio module

Radio module for DAISY II. This module allows the DAISY II handheld controller 66300 to be upgraded to a radio handheld controller. The Funk-Master is additionally required for radio operation. Installation is described in the manual of the DAISY II handheld controller. With charging adapter.

Selling price: CHF 139.00 RRP CHF 154.30

On order, lead time to be confirmed

10% off the recommended price
Daisy comfort support
Uhlenbrock 66320
Daisy comfort support

Plexiglas mounting bracket for screwing to the edge of the layout. With cable holder.

Selling price: CHF 8.80 RRP CHF 9.80

On order, lead time to be confirmed

Radio master LN
Uhlenbrock 66400
Radio master LN

The Funk-Master is the system's radio control centre. All radio operations are coordinated and executed within it.

Selling price: CHF 219.00 RRP CHF 242.90

On order, lead time to be confirmed

11% off the recommended price
MD2 solenoid accessory decoder
Uhlenbrock 67200
MD2 solenoid accessory decoder

Free address setting without decoder restrictions Points and signals with a solenoid drive that are to be controlled digitally must be fitted with a solenoid accessory decoder. Lamps, colour light signals or track sections that are to be switched on and off digitally are digitised with a switching decoder. Uhlenbrock solenoid accessory and switching decoders can be used in Märklin, Motorola and DCC digital systems. In Motorola operation, addresses 1–320 can be addressed with the Intellibox, and addresses 1–256 with other command stations. In DCC operation, addresses 1–2048 are possible. The addresses are not preset. They can be chosen freely and independently of one another. Each module has two outputs. Depending on the type, both outputs can be addressed together under one address or independently of each other under two addresses. The relay contacts of the switching decoders have potential-free outputs and can be connected as desired. Each output can be loaded with 1 A. By limiting the connections to two per module, the cable runs remain short and the wiring of the layout stays easy to follow. Connection is conveniently made via screw terminals. Setting the address is extremely simple. First the programming button of the decoder is pressed, then the corresponding point button on the control panel. The decoder simply remembers the corresponding address. The decoders are supplied with operating voltage and control information from the digital command station. Switches by pulse (+20 V) via two addresses, independently of each other, two solenoid accessories with one drive (point, signal) or one solenoid accessory with two drives (three-way point, double slip, signal with distant signal). The module is short-circuit protected. Art. no. 67200 MD2 solenoid accessory decoder

Selling price: CHF 25.90 RRP CHF 29.30

On order, lead time to be confirmed

10% off the recommended price
Lissy set
Uhlenbrock 68000
Lissy set

You can now use LISSY on your digital layout to do everything that was previously only possible with a computer. Without a computer, LISSY makes simple automatic control functions possible, such as block operation and shuttle lines, as well as optimised automatic control of even extensive fiddle yards. LISSY is identical in construction to the Fleischmann Train Navigation and offers interesting additional functions. With LISSY, data are transmitted from the locomotive to the digital system by infrared light. For this, an infrared transmitter is mounted on the vehicle. The infrared sensors of the receiver module are built into the track. LISSY recognises the train and shows which train has entered track 1 of the station. LISSY controls shuttle train operation in the terminus of the single-track branch line. LISSY manages your fiddle yard with through track, independently finds an individual track for each train and, when needed, automatically lets the trains run out of the fiddle yard again. The through track can be used on a locomotive-specific basis or, at the push of a button, by all locomotives. LISSY is a block system for digital layouts and automatically controls the block posts on the layout, without using a computer. LISSY slowly brakes every digital locomotive in front of a red signal using the decoder's internal braking delay. LISSY switches the sound of locomotives depending on the situation, for example the whistle before the tunnel or the horn at the level crossing before the whistle board. LISSY fades out the sound of locomotives fitted with "IntelliSound" when they travel into hidden areas (fiddle yard, tunnel). LISSY switches the lights of a selected locomotive on or off after a certain time, e.g. when the driver has stabled the locomotive. LISSY controls the speed of locomotives, e.g. at station approaches or on slow-speed sections. LISSY measures the speed of passing locomotives to scale. LISSY works without any break in the track and can therefore easily be retrofitted to any model railway layout. Information is displayed on the Intellibox or Track-Control display or on a connected PC. Art. no. 68000 LISSY set: 2 transmitters, 1 receiver, LocoNet cable, manual

Selling price: CHF 87.90 RRP CHF 97.80

On order, lead time to be confirmed