Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
11% off the recommended price New
H0 13-pin cylinder plug
Viessmann 4653 Scale H0
H0 13-pin cylinder plug

The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.

Selling price: CHF 11.90 RRP CHF 13.50

On order, lead time to be confirmed

10% off the recommended price
H0 Signal base, 2 pieces
Viessmann 4733 Scale H0
H0 Signal base, 2 pieces

Suitable for road bed tracks Märklin C-track, Trix, Roco GEO-Line and Piko A-track. Compatible with all Viessmann H0 light signals with base socket. L 3.06 x W 2 x H 0.95 cm

Selling price: CHF 9.80 RRP CHF 10.90

On order, lead time to be confirmed

10% off the recommended price
H0 Conducting magnetic couplers, 2-pole, 3 pair
Viessmann 5017 Scale H0
H0 Conducting magnetic couplers, 2-pole, 3 pair

These couplers allow you to provide an easy power supply system for the entire train. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362 coupling shaft. The couplers are contact-proof and cannot be uncoupled automatically, yet easy to separate and to couple. The thin cables (0.6 mm) allow a very easy mounting. Current consumption: max. 750 mA. Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).

Selling price: CHF 24.90 RRP CHF 27.90

On order, lead time to be confirmed

11% off the recommended price
Electronic welding light
Viessmann 5020
Electronic welding light

With this module the attached blue LED will flicker, so that it seems to be a real welding light. Realistic effect by integrated interval switch which interrupts the flickering automatically with breaks. Suitable for all kind of scales. Ideal to insert into depots, workshops, e. g. factory buildings. Maintenance free by LED lighting.

Selling price: CHF 23.90 RRP CHF 26.90

On order, lead time to be confirmed

H0 Campfire
Viessmann 5022 Scale H0
H0 Campfire

Using campfire it is possible to create nice romantic twilight effects. To show an Easter fire or BBQ fire. Campfire is equipped with 2 yellow bulbs. Together with the blaze flickering electronics item 5021 you can connect up to 7 yellow bulbs and one red bulb. Dimensions: Ø 2,8 cm. Spare bulb: items 3501 (yellow) and 3502 (red).

Selling price: CHF 20.90 RRP CHF 22.80

On order, lead time to be confirmed

10% off the recommended price
H0 Warning lights, 8 pieces with running light electronics
Viessmann 5040 Scale H0
H0 Warning lights, 8 pieces with running light electronics

With base socket for easy mounting. Maintenance free by LED lighting. Light running time is adjustable with the electronics and 2 functions are switchable. Function A: Outputs are single switched step by step so only one lamp resp. LED is shining. Function B: Outputs are switched one after the other and then switched off all at once.

Selling price: CHF 61.90 RRP CHF 69.20

On order, lead time to be confirmed

N Quadruple blinker electronics
Viessmann 5042 Scale N
N Quadruple blinker electronics

The blinker electronics is used to equip the model vehicles with very realistic flashlights. Special blink switching, which is mounted under the layout, provides a deceptively real-looking impression of a rotating beam. Operation allowed with AC voltage only. Spare bulbs: item 3506 (2x blue), item 3507 (2x yellow), item 3508 (2x red) and item 3509 (2x clear).

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

12% off the recommended price
H0 Coach lighting, 11 LEDs white
Viessmann 5046 Scale H0
H0 Coach lighting, 11 LEDs white

Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

Selling price: CHF 15.90 RRP CHF 18.10

On order, lead time to be confirmed

TT Coach lighting, 8 LEDS white
Viessmann 50465 Scale TT
TT Coach lighting, 8 LEDS white

The circuit board with high intensity, power-saving and maintenance free LEDs can be shortened and divided variously. Lighting intensity adjustable by a potentiometer. Additionally included are two soldering pads to connect rear lights. The supplied sitting figurines bring some life into the passenger cars. Can be used in any coach of all manufacturers designed to be equipped with lighting. The circuit is to be fixed under the waggon roof and can be adjusted to any waggon length by cutting. Flicker-protection and constant current source for steady brightness integrated. Current supply either by the sliding contactor/wheel-rail contactors of the waggon or by our current-carrying couplings. Suitable for DC, AC or digital supply voltage. Max. power input approx. 22 mA. Dimensions: L 0,7 x W 21,1 cm.

Selling price: CHF 14.90 RRP CHF 16.50

On order, lead time to be confirmed

12% off the recommended price
H0 Coach lighting, 11 LEDs yellow
Viessmann 5049 Scale H0
H0 Coach lighting, 11 LEDs yellow

Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

Selling price: CHF 15.90 RRP CHF 18.10

On order, lead time to be confirmed

TT Coach lighting, 8 LEDs yellow
Viessmann 50495 Scale TT
TT Coach lighting, 8 LEDs yellow

The circuit board with high intensity, power-saving and maintenance free LEDs can be shortened and divided variously. Lighting intensity adjustable by a potentiometer. Additionally included are two soldering pads to connect rear lights. The supplied sitting figurines bring some life into the passenger cars. Can be used in any coach of all manufacturers designed to be equipped with lighting. The circuit is to be fixed under the waggon roof and can be adjusted to any waggon length by cutting. Flicker-protection and constant current source for steady brightness integrated. Current supply either by the sliding contactor/wheel-rail contactors of the waggon or by our current-carrying couplings. Suitable for DC, AC or digital supply voltage. Max. power input approx. 22 mA. Dimensions: L 0,7 x W 21,1 cm.

Selling price: CHF 14.90 RRP CHF 16.50

On order, lead time to be confirmed

12% off the recommended price
H0 Coach lighting, 11 LEDs warm-white
Viessmann 5050 Scale H0
H0 Coach lighting, 11 LEDs warm-white

Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

Selling price: CHF 15.90 RRP CHF 18.10

On order, lead time to be confirmed

H0 Train rear lanterns with LED, 2 pieces
Viessmann 5056 Scale H0
H0 Train rear lanterns with LED, 2 pieces

2 red LEDs to light rear lights on rail vehicles. Designed to connect with the Viessmann coach lightings item-No. 5046, 5049, 5050, 5076, 5077, 5078 with already integrated series resistors. By use of these components the connection of the LEDs is possible also directly to the rail tension or to the outputs of the function decoders. Diameter LEDs 1,8 mm, cable length ca. 90 mm.

Selling price: CHF 6.50 RRP CHF 7.20

On order, lead time to be confirmed

H0 Level crossing-protection EBÜT 80
Viessmann 5057 Scale H0
H0 Level crossing-protection EBÜT 80

The set contains 4 colour light signals, each with a red and yellow LED and a St. Andrew's cross as well as an electronic unit. The lights show yellow for 2 seconds, followed by red. The red light turns off after the train has passed the level crossing. Maintenance free by LED lighting. Height: 3,5 cm.

Selling price: CHF 80.90 RRP CHF 89.80

On order, lead time to be confirmed

11% off the recommended price
Quadruple blinker electronics for St. Andrew's crosses
Viessmann 5065
Quadruple blinker electronics for St. Andrew's crosses

Suitable for St. Andrew's crosses item 5058 (H0) and item 5803 (N), and route indicator signals items 5061 and 5062. For automatic operation the electronic relay item 5552 and switching tracks resp. the reed contacts, item 6840 (H0) are required.

Selling price: CHF 23.90 RRP CHF 26.90

On order, lead time to be confirmed

Ignition module for gas lamps
Viessmann 5066
Ignition module for gas lamps

Electronics for prototypical control of all Viessmann gas lamps in all scales. Suitable for LED lights, too. After switch-on by using push-button panel the lamps start to flicker like the prototype and slowly increase in brightness. After approx. 5 seconds the lamps will reach full brightness. During operation the lamps flicker occasionally (simulates variations of the gas pressure). Switched off, the lamps will continue to glow with reduced brightness and fully extinguish after approx. 1,5 seconds. 5 separate outputs with different ignition patterns. Each output can drive up to 3 gas lamps. We recommend to connect only one lamp per output as in reality no 2 lamps operate exactly the same way. Switching on / off is facilitated via a separate momentary action switch, e. g. push-button panel item 5547.

Selling price: CHF 33.90 RRP CHF 37.20

On order, lead time to be confirmed

Fluorescent lamp-simulator
Viessmann 5067
Fluorescent lamp-simulator

Electronic circuitry for realistic operation of Viessmann fluorescent lighted lamps in all scales. Useable with LED lights, too. After switching on, the fluorescent tubes flicker for a prototypical time until they all reach full output and burn uniformly. Each lamp operates slightly differently. At one of the outputs a defect fluorescent lamp can be simulated. This tube will flicker in irregular intervals, sometimes lighting up quickly and other times very slowly. 5 separate outputs with different starting patterns. Each output can drive 3 lamps. We recommend connection of only one lamp to each output, since no 2 lamps will ever operate exactly the same way in reality. Switching on / off is effected via a separate momentary action switch, e. g. push-button panel item 5547.

Selling price: CHF 33.90 RRP CHF 37.20

On order, lead time to be confirmed

10% off the recommended price
H0 Pantograph flashlight
Viessmann 5068 Scale H0
H0 Pantograph flashlight

Effect simulates the arc discharge of a moving train. Established with very small electronics and blue micro-LED. For easy installation in electric locomotives gauge H0.

Selling price: CHF 35.90 RRP CHF 39.90

On order, lead time to be confirmed

H0 Train rear lanterns with LED, 2 pieces
Viessmann 5069 Scale H0
H0 Train rear lanterns with LED, 2 pieces

Highly detailed functional lantern for epochs II-III fitting H0 scale waggons. Maintenance free by LED lighting. Scope: 2 LED lights with boards, rectifier and 2 resistors.

Selling price: CHF 34.90 RRP CHF 38.30

On order, lead time to be confirmed

10% off the recommended price
H0 Conducting couplers, 4-pole, 1 pair
Viessmann 5071 Scale H0
H0 Conducting couplers, 4-pole, 1 pair

In each coupler 4 conducting contact areas are integrated. Each wire is up to 0,5 A. Used as fixed trainset formation, cannot be uncoupled automatically, yet easy to separate and to couple! Including connection cable. Fitting NEM 362-shaft.

Selling price: CHF 25.90 RRP CHF 29.00

On order, lead time to be confirmed

Multi protocol light decoder
Viessmann 5074
Multi protocol light decoder

Multi-protocol light decoder, item 5074 - maximum versatility, minimal cost! Discover the next generation of lighting control for your model railway layout: With the multi-protocol light decoder, item 5074, you can replace up to 16 individual signal control modules (e. g. for block signals) with a single device – reducing your costs by up to 90%! Your benefits at a glance: Highly versatile: Control a vast range of lighting scenes and effects – from building and industrial illumination to street lamps and specialized effects such as lightning flashes, fireworks, or emergency vehicle dual-flashers. Simple operation: Configuration is effortless using DIP switches (“mouse-pianos”) or – for even greater flexibility – via CV programming. Maximum flexibility: Four independent groups, each with eight overload-protected outputs, can be driven individually or combined into stunning light scenes. Wide effect selection: Each output offers 13 distinct scene types with numerous effects – from flicker-free LED illumination to realistic random effects. Smart control options: Each group features 2 independent analogue control inputs. Additionally, all outputs can be controlled digitally via your central command station. Powerful and safe: Every light output supports up to 100 mA and includes overload protection for reliable, worry-free operation. Compatible with both analogue and digital systems: Full compatibility for seamless integration into your layout. Typical applications: House lighting with realistic random behaviour Colour light signal control TV simulator Industrial or commercial lighting Street lights with start-up, flicker and after-glow effects Campfires, warning flashers, railway crossing lights, chasing lights Special effects including lightning, fireworks, emergency vehicle dual-flash and much more Choose innovation, reduce costs, and illuminate your model railway with item 5074!

Selling price: CHF 119.00 RRP CHF 132.20

On order, lead time to be confirmed

H0 Coach lighting, 11 LEDs yellow, with function decoder
Viessmann 5076 Scale H0
H0 Coach lighting, 11 LEDs yellow, with function decoder

Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

Selling price: CHF 29.90 RRP CHF 33.20

On order, lead time to be confirmed

H0 Coach lighting, 11 LEDs white, with function decoder
Viessmann 5078 Scale H0
H0 Coach lighting, 11 LEDs white, with function decoder

Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

Selling price: CHF 29.90 RRP CHF 33.20

On order, lead time to be confirmed

10% off the recommended price
LED house interior lighting with TV-simulation
Viessmann 5079
LED house interior lighting with TV-simulation

Power-saving and maintenance free LED house interior lighting for all model railway buildings. All windows/rooms can be illuminated separately and realistically.The clou: Attached control module and board with special red-blue LEDs create a lifelike TV simulation! The control module is equipped with 4 outputs which allows to connect up to 6 LED-boards. More boards with one LED are available, yellow item 6007, white item 6008, warm-white item 6006 or boards with 2 LEDs for more brightness in white item 6017, yellow item 6018 and warm-white item 6021. Including 3 boards with one white LED, one board with red-blue LEDs for TV simulation, one control electronics and 12 light boxes in 4 different sizes. Dimensions of the light boxes: L 1,7 x W 1,8 x H 2,6 cm, L 1,7 x W 1,6 x H 2,1 cm, L 1,7 x W 1,2 x H 1,9 cm, L 1,7 x W 1,4 x H 2,3 cm.

Selling price: CHF 54.90 RRP CHF 61.00

On order, lead time to be confirmed