Command Stations & Boosters
Model For switching 4 twin-coil solenoid accessories with automatic cutoff. Automatic feedback of the position by means of LEDs when using the 75491 (K) or 74491 (C) point motors as well as the Minitrix 14934 and 14935 point motors. With 8 sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7271 unit
In stock, shipped within 1-3 days
Model Connection option for the s88 (60881) and s88 DC (60882) and the previous s88 feedback modules (6088 and 60880) to the Central Station II and Central Station 3 or to the 60145 Terminal. One previous connection socket for the 6088 and 60880 feedback modules as well as two RJ45 sockets for the new 60881 and 60882 feedback modules are available. In addition, there are 16 inputs for contact devices (common return detector as on the 60881). These 16 inputs can be configured specially for track diagram control panels, so that a matrix with up to 64 push buttons can be created. A 66360 or 60201 switched-mode power supply is required for operation. Highlights All connections with lift terminals
In stock: 4 on the shelf, shipped within 1-3 days
Model For switching a maximum of 4 points. Automatic feedback of the position by means of LEDs is possible when using the 74492 point motor. A 4-conductor cable with plugs for connecting several panels is included. Note To extend the cable connection between the point control panel and the point motor we recommend item 71054.
In stock: 3 on the shelf, shipped within 1-3 days
Finely stepped speed control for smooth starting and powerful acceleration up to top speed. Single-knob operation for setting the track voltage and determining the direction of travel by turning the control knob out of the centre position. Dimensions of the controller 130 mm (L) x 70 mm (W) x 50 mm (H).
In stock: 2 on the shelf, shipped within 1-3 days
Model For switching 4 twin-coil solenoid accessories such as points and signals or up to 8 uncoupler tracks. The position set is indicated by the position of the respective buttons. With 8 sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7272 unit
In stock: 2 on the shelf, shipped within 1-3 days
Item no. 61060 Plug-in set, replacement for Intellibox BASIC, Intellibox II, IB Com, Power 3 (from Oct. 2003), Power 6
In stock: 2 on the shelf, shipped within 1-3 days
Prototype As a multi-protocol controller with its high-resolution, modern colour touchscreen, its two throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. A switched-mode power supply is not included in the contents supplied. Model As a multi-protocol controller with its high-resolution, modern colour touchscreen, its 2 throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. Up to 32 functions can be controlled on locomotives; with accessory items up to 320 Motorola or 2048 DCC solenoid accessories are possible. The Central Station 3 plus also has 2 built-in locomotive card readers (for storing the locomotive data on a locomotive card or for quickly calling up the locomotive by inserting the locomotive card), an SD card slot for expanding the memory, and an integrated speaker for playing sounds typical of model railways. A powerful Booster is integrated to supply the layout with power for running and switching. The Central Station 3 plus can be used with several units, i.e. with the optional cable (60123) several Central Station 3 plus units (60216), each with a network connection, can be operated together on one layout. Additional driver's desks, other layouts, and keyboards extend the operation of the layout, whereby shared and separate configurations for the layout areas to be controlled can be held in the Central Station 3 plus. The Central Station 3 plus has an integrated s88 connection, 2 built-in USB hosts (for a mouse, keyboard, or USB stick, for example), a USB charging socket, a network connection for communicating with a PC, connections for 2 Mobile Stations, a connection for external speakers, and others for the Märklin bus system. Load capacity at the feeder track: max. 5 A, load capacity at the programming track: max. 1.2 A. Max. outputs: - 5.0 A when using a Märklin 100W switched-mode power supply, exclusively with Gauge 1 and LGB. - 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. Please be sure to note that the cable cross-section must be greater than 0.5 mm². A switched-mode power supply is not included in the contents supplied. Dimensions 320 x 195 x 80 mm. Highlights Digital multi-protocol controller (mfx, mfx+, DCC, Motorola) High-resolution, modern colour touchscreen Integrated, central track diagram control panel Housing with a central stop button and 2 rotary controllers in robust industrial quality Up to 32 controllable locomotive functions. 2 built-in locomotive card readers Integrated speaker Built-in SD card slot Integrated powerful Booster Output: 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. Output: 5.0 A when using a Märklin 100W switched-mode power supply exclusively with Gauge 1 and LGB. Up to 320 Motorola and 2048 DCC solenoid accessories can be controlled Route control (incl. shuttle train control). 2 USB hosts for a mouse, keyboard, USB stick, etc. and 1 USB charging socket Direct connection for 2 Mobile Stations and one bus expansion unit Integrated s88 connection Connections for a network, external speakers, and the Märklin bus, for example Expansions can be connected by means of the Märklin bus Can be used with several units with the Central Station 3 plus You can find further technical information => in our instructions. You can find free information and updates here
In stock: 1 on the shelf, shipped within 1-3 days
Note: To connect the Mobile Station, the connection box 60112 or 60114 (gauge 1) or 60113 or 60116 (H0) is required. Highlights Simple, convenient operation. Backlit graphic display with self-explanatory pictograms. 16 switchable additional functions. 320 solenoid accessories can be switched. Integrated locomotive card reader. Simple wiring (Plug & Play) to the Gleisbox and the Central Station. Integrated Märklin Digital locomotive database. Product description Digital handheld controller unit. 11 locomotives can be controlled by direct access. Locomotives are selected from the integrated Märklin Digital locomotive database or via digital addresses. 16 locomotive functions and 320 solenoid accessories can be switched. Automatic display of the function states on the integrated, backlit black-and-white full graphic display by means of self-explanatory pictograms for mfx locomotives or when selecting a locomotive from the integrated digital locomotive database. Integrated locomotive card reader. Red illuminated Stop button. 1.9 A power supply in the optionally available Gleisbox (60112 or 60114 / 60113 or 60116). Direct connection of 2 Mobile Stations (60653 or 60657) to one Gleisbox (60112/60114 or 60113/60116), which then work together in master-slave mode. By using MS II Hubs (60122), the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 and 60213-60215), the Central Station settings can be used (complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations). Driving and controlling vehicles in the motorola, mfx and DCC formats, switching solenoid accessories in the motorola and DCC formats. Dimensions 160 x 100 x 39 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Note: A CS2 or a CS3/CS3+ with a WLAN connection or the WLAN receiver box 60117 is required as a receiver for the MS WLAN. Model Digital handheld controller unit. 40 locomotives can be controlled with direct access. Automatic registration of mfx locomotives. Integrated locomotive database for selecting older Märklin/Trix/LGB locomotives. Manual registration of MM and DCC locomotives by means of digital addresses is possible. Up to 32 locomotive functions can be controlled, with a display of the function statuses. Self-explanatory function pictograms with mfx and database locomotives. Up to 320 solenoid accessories can be controlled. Can be operated with one hand thanks to the grip (Pop Socket) included on the back. The display content rotates to match the position of the unit. Illuminated stop button to signal the stop status. Backlit b/w full graphics display. Dimensions 160 x 100 x 42 mm. Wireless coupling with a WLAN receiver box (60117) or with a CS2 as well as a CS3/CS3+ (60216, 60226 as well as 60213–60215), if the latter is part of a WLAN-capable network. When coupled with a CS, the Mobile Station WLAN can access its complete locomotive list and the solenoid accessories with the addresses 1 to 320. Up to four MS WLAN units can be coupled to one WLAN receiver box (item no. 60117). Either 4 AAA batteries or corresponding rechargeable batteries can be used to operate the unit. However, these are not included in the contents supplied. Available exclusively in the countries of the European Union, USA, Canada, CH, UK, Japan, Australia, and New Zealand. Highlights Simple operation, familiar from the MS2, even without looking One-handed operation with the grip (Pop Socket) included on the back New tactile rotary controller for even more convenient handling Backlit graphics display with self-explanatory pictograms The display content rotates to match the position of the unit Simple connection to the WLAN receiver box or to a Central Station 2, 3 or 3 plus Up to 32 controllable auxiliary functions. 320 solenoid accessories can be controlled Integrated Märklin Digital locomotive database Can be used in the 2-rail and 3-rail area. … and of course all of the great features of the MS2 Note Operate the layout wirelessly with one hand with the Mobile Station WLAN!
In stock: 1 on the shelf, shipped within 1-3 days
With 4 single-pole changeover switches. Contacts can be loaded up to 2 A. To be operated by means of a control panel, a switch track, a contact track, a switch contact or a digital decoder.
In stock: 1 on the shelf, shipped within 1-3 days
Booster connection cable. Spare cable for connecting boosters (10765, 10789, 10805, 10806, 10807) with: Digital amplifier (10764) Digital central power unit (10820, 10822, z21) Break generator (10779) Connecting the boosters mentioned above with each
In stock: 1 on the shelf, shipped within 1-3 days
Control unit with many operation functions. Several Z21 WLANMAUS can be simultaneously operated – possible with all Z21 systems (z21 start combined with WiFi Package) or if your own router is available with Art. no. 10818 – z21 activation code. The Z21 WLANMAUS gives you wireless freedom around your layout. Wireless freedom, 31 functions per locomotive (including headlights) Control of up to 9999 locomotives and 2048 turnouts 100 locomotive addresses can be stored in the database and can be assigned with names (up to 10 digits) Locomotive control with 14, 28 or 128 speed steps Writing and reading of CV values 1–1024 on your locomotive decoder Display with adjustable brightness Controller with center position Operated with commercially available standard batteries (3 x AAA, not included in the delivery) 5 SSID passwords: current password + the 4 last passwords 10 sets of points with 10-character names and 10 points each Firmware updateable Contents: Z21 WLANMAUS Manual
In stock: 1 on the shelf, shipped within 1-3 days
Unlock Code z21 The z21 activation code is required if you already have your own router. You can then use all the functions (see item no. 10814) of the z21 start including the start sets. Please note that extended network knowledge is necessary for this purpose. Follow this Link for Code activation Click HERE for more information! Info: system requirement is a Windows PC or notebook as well as an existing Internet connection. Please also note our video: Activation of the z21 start with the z21 WLAN package Please note that the unlock code cannot be delivered by e-mail!
In stock: 1 on the shelf, shipped within 1-3 days
Z21 pro LINK The configuring and networking of your Z21 hardware is getting even simpler and more convenient. In addition the Z21 pro Link also stands out thanks to easy operation and the ability to keep up to date with updates. Configuration and networking of your Z21 components at a new level: No complex CV tables With integrated web server Installed WiFi The 3 essential functions 1. Configuring The Z21 pro LINK always automatically detects which device it is currently connected to. You can conveniently configure this device via the installed display and buttons without the need of any other components. Or you carry out the necessary adjustments via the Z21 pro LINK website on your PC or smartphone. Thus you benefit from the larger screen. 2. Updating Always keep your Z21 system up to date and benefit permanently from all new functions. You can perform this easily with the Z21 Updater App for iOS and Android or via PC with the Z21 Maintenance Tool. 3. Controlling The Z21 pro LINK also networks all of your devices with zLink interface. It enables to perform communication with control commands and status queries directly via WiFi. Therewith the "Internet of Moba Things" has become reality. Package Contents: Z21 per LINK Z21 zLink cable
In stock: 1 on the shelf, shipped within 1-3 days
Controller with a 230 V / 18 VA switched-mode power supply. Four-stage speed control for a slow start and a powerful increase in speed up to maximum speed. Single-knob operation for setting the track voltage and for determining the direction of travel by turning the control knob out of the centre position. Dimensions of the controller: 130 mm (L) x 70 mm (W) x 50 mm (H).
In stock: 1 on the shelf, shipped within 1-3 days
The YD7460-15 is a switched-mode power supply with 15 V DC voltage and 4 A output for YaMoRC digital central stations and boosters, for example YD7010 or YD7403. According to the manufacturer, the 15 V version is suitable for Gauge TT and smaller gauges. The power supply is double-insulated (Protection Class 2), short-circuit and overload protected, and does not heat up when the central station or booster is idle. It has a compact design and a two-core low-voltage cable instead of a thin coaxial cable. It was manufactured in accordance with the manufacturer's specifications to match the YaMoRC boosters and central stations. Output 15 V DC, 4 A Protection class 2 Short-circuit and overload cut-off
In stock: 1 on the shelf, shipped within 1-3 days
Cab Control DCC Digital System, with Mobile Control Pro, 6A, Set with Power Supply Input 110–240V EU, Output 15–21V, DE/EN Manual With CabControl, we combine the ease of use of our popular MobileControl Pro handheld controller with the Integrated Control Unit (ICU) base station, which incorporates a powerful booster, a high-quality DCC command station with RailCom® and RailComPlus®, and a complete Wi-Fi access point. With its 6 A output power, the CabControl is an ideal command station for model railway enthusiasts of all gauges who are looking for simple wireless hand-held operation, but do not want to forgo the convenience of automatic locomotive detection and comfortable locomotive control. Controlling locomotives The Integrated Control Unit (ICU) is a fully featured DCC digital command station with RailCom® and RailComPlus® data format, capable of controlling up to 16,384 locomotives. Up to 31 functions can be assigned to each locomotive. Individual function button symbols are managed for each locomotive as a matter of course, as is the locomotive name. A locomotive symbol can be selected directly on the handheld controller. If your locomotive is fitted with a RailComPlus®-compatible decoder, the locomotive will be recognised automatically the first time it is placed on the track, and all its properties will be imported. You will not need to change anything in the configuration. If required, the locomotive's address will be reprogrammed fully automatically. The Mobile Control Pro handheld controller, developed specifically for controlling model railways, offers a finely responsive rotary control and four tactile function keys on the sides, which ensure error-free operation without looking at the controller. The display with a resolution of 480×800 pixels shows all information in plain text at all times. Up to 32 wireless handheld controllers can be managed. Switching points/solenoid accessories Using the control panel, up to 1000 solenoid accessories (points, signals) can be switched directly from the handheld controller. Programming the decoder The CabControl system can both programme locomotives directly on the main track using POM and read them back directly using RailCom®. A programming track can of course also be connected to the ICU. Booster The integrated booster with 6 A output power is strong enough to supply even Scale 1 or G scale layouts with current. The track voltage can be adjusted directly on the supplied power supply to suit the gauge. Cab Control is compatible with all gauges. Connectivity The Integrated Control Unit (ICU) incorporates a full Wi-Fi access point as well as a LAN socket and a USB socket. This means the system can, if desired, be connected directly to your home network and supplemented with an optional computer control solution. All well-known software products are supported by the ICU, as the protocol is designed to be compatible with the ECoS. If PC software is used, ECoSDetector feedback modules for track occupancy detection can also be connected to the ECoSLink bus and read directly by the software. The USB socket can be used either to charge the Mobile Control Pro directly, or to connect a USB stick for data backup or software updates for the ICU. Base unit: command station with ARM controller and Linux® operating system. Integrated booster with 6 A continuous output. RailCom® feedback integrated. Programming track output with 0.6 A output. 1 connection for ECoSlink devices. Connection for ECoSlink bus extension. 10/100 Mbit Ethernet connection. Integrated Wi-Fi access point, configurable as master or client. Features DCC with 14, 28, 128 speed steps. RailCom® and RailComPlus®. Up to 9,999 addresses. Up to 31 function keys per locomotive. Up to 16,384 locomotive objects, 1,024 point objects. 32 multiple tractions each with up to 16 locomotives. Contents supplied Integrated Control Unit (ICU). Power supply with adjustable output voltage 15V–21V. Mobile Control Pro handheld controller with neck strap and USB charging cable. Connection terminals for track & programming track. Comprehensive operating instructions.
On order, shipped within 4-5 days
LokProgrammer unit, power supply, manual, USB adapter (Dimensions: 95mm x 85mm x 22mm (3.74 inch x 3.35 inch x 0.87 inch) You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! This versatile device puts the power of realistic sound reproduction directly into your hands, transforming your model railroad experience. With the LokProgrammer, you can easily load custom sound projects onto ESU decoders, enabling your locomotives to reproduce the most authentic sounds. Whether you seek the powerful chuff of a steam giant, the distinctive growl of a diesel, or the specific horn of a chosen prototype, this tool unlocks those auditory possibilities. The intuitive LokProgrammer software interface allows you to select from an extensive library of pre-made high-quality sound files or even import your own meticulously recorded audio. You gain granular control over volume levels, the activation of individual sound elements, and the fine-tuning of engine characteristics to match prototype behavior. Picture precisely adjusting the diesel prime mover on a modern locomotive or the rhythmic exhaust beat of a vintage steam engine. The LokProgrammer empowers you to personalize every nuance, ensuring your models sound as unique and authentic as they appear. This unparalleled level of customization adds a profound layer of immersion to your miniature railway world. Program the decoder while it is installed in the locomotive or connect it to our Decoder Tester and program prior to installation. Sound customization is accessible and easy for everyone. Embrace the ultimate in model railroad sound realism and let your favorite locomotives truly come alive with ESU's groundbreaking LokProgrammer. Change the sound saved on the decoder. Setting of all digital parameters of the Loksound decoder such as address of the loco, operation speed, maximum speed, braking deceleration, brightness of lights etc; you can set all options with your computer very easily - no cumbersome entering of CVs (configuration variables) with your command station. Rearrange your sounds and transfer it to the LokSound decoder. You can use all sounds that can be downloaded to your computer hard disk. Sound can be allocated to different events. Additional sounds can be activated via function buttons. Sound With the LokProgrammer you can replace the sound data of any LokSound decoder as many times as you wish with a different sound. To this end we offer more than 200 different, fully matching sounds of various prototypes and locos for downloading on your computer. Also you can edit just parts of a sound project: You don’t like the horn/whistle? Just replace it with one of the many others. Suitable sources beside those offered by us, are available in Windows *.wav format. Sound – even your voice or music is no problem for our decoders. With the LokProgrammer’s aid you use the entire flexibility and functionality offered by LokSound decoders. Programming By the same token, all other ESU decoders profit from the LokProgrammer’s versatility; no matter if DCC, Multiprotocol - or mfx decoder. With its help it’s possible to edit all parameters of the particular decoder simply and conveniently. The available options depend on the kind of decoder. Besides addresses and acceleration / deceleration settings, this concerns above all the allotment of function keys (function mapping), the allocation of special effects to the individual outputs, or the lamp brightness. The LokProgrammer can also help when optimizing back EMF parameters or the loadable speed table. All options can be programmed very conveniently: There is no tedious punching-in of CV-numbers at the digital station anymore. Hook up It’s this simple: The LokProgrammer is a small stand-alone programming box, it does not interface or connect to any DCC command station. It gets wired between the PC and a dedicated LokProgrammer programming track. To connect it you use the included USBadapter cable. For power we include a 500 mA wall power supply. If your needs are greater (e.g. for gauge I engines), you can also use a conventional model railroad transformer with max 20V DC output. Software After hook-up you start up the especially user-friendly LokProgrammer software. This runs on all modern Windows-systems (Windows 8.1 and higher). Just put a locomotive with an ESU decoder on a dedicated piece of track connected to the LokProgrammer, and right away you can read, edit or program it. The Programmer automatically recognizes the decoder in the locomotive, no need to manually select the decoder type! Simplicity The LokProgrammer is recommended not only for the use with ESU "retail" decoders: Many well known model railroad manufacturers factory-furnish their locos with ESU-decoders. The parameters of these decoders can be modified again with the help of the LokProgrammer to suit the needs of your operations. You see, purchasing a LokProgrammer pays off in any case. Upgrades The LokProgrammer can also be instrumental in updating decoders. Almost all ESU decoders are firmware updatable, in case you desire a new software version. To do this, you only need the LokProgrammer and the most current version of the LokProgrammer software. The updates will happen automatically whenever you write sound or data to a LokSound decoder. The future LokProgrammer software is being reviewed continuously. The latest, pertinent version can always be downloaded from our website , or can be installed automatically, through an internet-update function, on your computer.
On order, shipped within 4-5 days
Point switch to operate two points, or two double slips.
On order, shipped within 10-15 days
I. e. to operate four uncoupler tracks.
On order, shipped within 10-15 days
To operate one three-way point.
On order, shipped within 10-15 days
The LZV200 handles data processing and signal amplification. Naturally, the LZV200 meets the requirements and conditions for operating the model railway. If required, the track voltage can be adjusted between 11 and 22 volts, with a maximum output current of 5 amperes available. In the event of higher load, the safety circuit switches off. The factory setting is an output voltage of 16V and a maximum current of 5A. Dimensions: 120 x 55 x 120 mm
On order, lead time to be confirmed
LH01 hand controller with rotary knob
On order, lead time to be confirmed
The hand controller features a rotary knob and a large, backlit LCD display, with adjustable contrast and brightness, various operating modes, route programming and storage. Dimensions: 144 x 62 x 42 mm. The leaflet for the LH101 firmware update is located under "N:2_Digital_plus21101_LH101UpdateFirmwareupdate_LH101.pdf".
On order, lead time to be confirmed