Command Stations & Boosters
LH101-R hand controller with rotary knob Batteries and connecting cable are included Dimensions: 144 x 62 x 46 mm
On order, lead time to be confirmed
Like the LH101-R radio hand controller, but with the LTM101 receiver. Batteries and connecting cable are included. Dimensions of the LH101-R radio hand controller: 144 x 62 x 46 mm, dimensions of the LTM101 receiver: 53 x 60 x 20 mm.
On order, lead time to be confirmed
Update stick for updating an LZV200 to software version 4.0 The update procedure is described in the accompanying operating instructions.
On order, lead time to be confirmed
This electronic controller for analogue operation offers state-of-the-art technology with high traction current and modern features for your analogue LGB layout: max. 5 A traction current, for use with the 51095 switched-mode power supply. Very sensitive control and smoothed DC voltage. Adjustable control range: +/- 135° with a zero position in the centre / booster button with programmable acceleration, stop/halt button. LED indicators for stop, overload, ready for operation, and direction of travel. Terminals for cables with a cross-section of up to 1.5 mm2, protection against short circuits. Output: 0-24 V DC voltage. Traction current: max. 5 A. Dimensions 160 x 120 x 95 mm.
On order, shipped within 10-15 days
Controller for use with the 51092 switched-mode power supply.
On order, shipped within 10-15 days
The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.
On order, shipped within 10-15 days
This controller is designed for special applications, e.g. for installation in track diagram control panels. With increased running current, while at the same time generating less waste heat than its predecessor. Features: max. 5 A running current / built-in rectifier / suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 100 x 80 x 90 mm.
On order, shipped within 10-15 days
Prototype German-language version. Model Detailed description of the Märklin Digital system. In this book you will get all of the essential information about the Central Station 3 with software version 2.5, including digital control with the Central Station 3, conversion to digital operation, tips for automated sequences, and designing track plans. More than 220 pages in Din A4 format. German-language version. Highlights Contains all of the essential information about the Central Station 3 with software version 2.5. Comprehensive guide – explained step by step: from the basics to advanced functions of the Central Station 3. Easy to use – presented understandably, ideal for beginners and advanced Märklin digital railway modellers Get more out of your model railway – learn to control locomotives, points, and signals conveniently in digital mode Practical tips & tricks – clear examples and illustrations for direct use on your layout
Pre-order, release expected in December 2026
Prototype English-language version. Model Detailed description of the Märklin Digital system. In this book you will get all of the essential information about the Central Station 3 with software version 2.5, including digital control with the Central Station 3, conversion to digital operation, tips for automated sequences, and designing track plans. More than 220 pages in Din A4 format. English-language version. Highlights Contains all of the essential information about the Central Station 3 with software version 2.5. Basics of digital control with the CS 3
On order, shipped within 10-15 days
Connect-6021 for the bidirectional connection of the former Märklin Digital System to the Central Station 60213-60215 and 60216/60226. It offers the possibility of controlling 80 locomotives (motorola as well as mfx) with the Control Unit 6021, of switching locomotive functions (function, F1 – F4), and of switching solenoid accessories with a synchronous display of their position. The memory 6043 can be used, as can the memory functionality of the Central Station 60213-60215 and 60216/60226. Connections on the back: M-Bus cable (for connection to 60213-60215 and 60216/60226). Side connection: plug strip for connection to the "6021 world". Dimensions 135 x 120 x 80 mm.
Pre-order, release expected in December 2026
Model As a multi-protocol controller with its high-resolution, modern colour touchscreen, its 2 throttles, and its integrated central track diagram control panel, the Central Station 3 offers the possibility of controlling the locomotives and the entire layout simply and conveniently. Up to 32 functions can be controlled on locomotives; with accessory items up to 320 Motorola or 2048 DCC solenoid accessories are possible. The Central Station 3 also has 2 built-in locomotive card readers (for storing the locomotive data on a locomotive card or for quickly calling up the locomotive by inserting the locomotive card), an SD card slot for expanding the memory, and an integrated speaker for playing sounds typical of model railways. A powerful Booster is integrated to supply the layout with power for running and switching. The Central Station 3 can be used with several units, i.e. with the optional cable (60123) additional Central Station 3 plus units (60216), each with a network connection, can be operated together on one layout. Additional driver's desks, other layouts, and keyboards extend the operation of the layout, whereby shared and separate configurations for the layout areas to be controlled can be held in the Central Station 3 (plus). The Central Station 3 has 2 built-in USB hosts (for a mouse, keyboard, or USB stick, for example), a USB charging socket, a network connection for communicating with a PC, connections for 2 Mobile Stations, a connection for external speakers, and others for the Märklin bus system. S88 connections can be provided externally by means of the Link s88 (60883). Load capacity at the feeder track: max. 5 A, load capacity at the programming track: max. 1.2 A. Max. outputs: - 5.0 A when using a Märklin 100W switched-mode power supply, exclusively with Gauge 1 and LGB. - 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. The Central Station 3 is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. Please be sure to note that the cable cross-section must be greater than 0.5 mm²! A switched-mode power supply is not included in the contents supplied. Dimensions 320 x 195 x 80 mm. Highlights Digital multi-protocol controller (mfx, mfx+, DCC, Motorola) High-resolution, modern colour touchscreen Integrated, central track diagram control panel Housing with a central stop button and 2 rotary controllers in robust industrial quality Up to 32 controllable locomotive functions. 2 built-in locomotive card readers Integrated speaker Built-in SD card slot Integrated powerful Booster Output: 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. Output: 5.0 A when using a Märklin 100W switched-mode power supply exclusively with Gauge 1 and LGB. Up to 320 Motorola and 2048 DCC solenoid accessories can be controlled Route control (incl. shuttle train control). 2 USB hosts for a mouse, keyboard, USB stick, etc. and 1 USB charging socket Direct connection for 2 Mobile Stations and one bus expansion unit Connections for a network, external speakers, and the Märklin bus, for example Expansions can be connected by means of the Märklin bus You can find further technical information => in our instructions. You can find free information and updates here
Pre-order, release expected in December 2026
Prototype Note: The connector box 60114 or 60112 (Gauge 1) or 60116 or 60113 (H0) is required to connect the Mobile Station. Model Digital handheld controller unit. 40 locomotives can be controlled with direct access. Locomotive selection from the integrated Märklin Digital locomotive database or by means of digital addresses. Up to 32 locomotive functions and 320 solenoid accessories can be controlled. Automatic display of the function statuses in the integrated backlit b/w full graphics display by means of self-explanatory pictograms with mfx locomotives or when a locomotive is selected from the integrated digital locomotive database. Integrated locomotive card reader. Red illuminated stop button. 1.9 A power unit in the optionally available track box (60114 or 60112/60116 or 60113). Direct connection of 2 Mobile Stations (60657) to one track box (60112/60114 or 60113/60116), which then work together in master-slave mode. By using MS II hubs (60122) the number of controllers used can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 as well as 60213-60215), the Central Station settings (the complete locomotive list of the Central Station, all of the solenoid accessories of the Central Station keyboard with their designations) can be accessed. Running and controlling vehicles in the motorola, mfx, and DCC formats, switching solenoid accessories in the motorola and DCC formats. Dimensions 160 x 100 x 39 mm. *After update 1.4.1 of the 60216/60226 and update 3.55 of the 60657/66955. Highlights Simple, convenient operation Backlit graphics display with self-explanatory pictograms Up to 32 controllable auxiliary functions. 320 solenoid accessories can be controlled Integrated locomotive card reader Simple cabling (plug & play) to the track box and the Central Station Integrated Märklin Digital locomotive database
On order, shipped within 10-15 days
With 2 single-pole switches and one changeover switch for different circuits. A wide variety of tasks can be assigned to the universal remote switch (up to 3 functions at the same time), which it carries out automatically. Operating voltage 10 V. Twin-coil drive. It is operated by a circuit track, the 7272/72720 control panel or a manual switch lever. Width 30 mm. Length 70 mm. Height 8 mm.
On order, lead time to be confirmed
Since 2019, the DiMAX Navigator has been supplied with 2.4GHz radio technology. The 2.4GHz radio system allows international use and reduces the product range to a single transmitter. The range is comparable to the previous radio system. The DiMAX Navigators 8134801 are already equipped from the factory with a 2.4GHz radio chip onboard; a radio interface is no longer present. All Navigators currently on the market can be equipped with the retrofit transmitter 8131901. This ensures that the Navigators remain up to date technically in the future.
On order, lead time to be confirmed
Enjoy boundless freedom with the DiMAX Navigator. This handheld controller offers a range of functions that goes far beyond the operating options of handheld controllers to date. One highlight is that, for example, locomotives can be driven and points switched at the same time. For maximum operating enjoyment, the housing has been optimally shaped on ergonomic principles and the centre of gravity balanced so that it sits perfectly in the hand. Thanks to the symmetrical cross-section of the housing, the DiMAX Navigator is equally well suited to left-handed and right-handed users and can be operated optimally. A large, clearly arranged graphic display with backlighting provides comprehensive information on the locomotive currently being controlled, in a freely selectable language. This handheld controller is also equipped with switchable and dimmable blue/white keyboard lighting, which ensures running around the clock. The rotary knob is lit in different colours depending on the function. All locomotives from volume manufacturers available on the market can be shown on the LCD with the matching symbol and an individual name. The individual functions, the light symbol and the current speed step are also shown on the display. Since 2019 the DiMAX Navigator has been supplied with 2.4GHz radio technology. The 2.4GHz radio system allows international use and reduces the product range to a single transmitter. The range is comparable to that of the previous radio system. The DiMAX Navigators 8134801 are already fitted at the factory with a 2.4GHz radio chip on board, and a radio interface is no longer present. All Navigators previously on the market can be fitted with the retrofit transmitter 8131901. The Navigators will therefore remain technically up to date in future too. Features simple to use, ergonomically shaped large, easily legible graphic display adjustable backlighting easy to read in sunlight suitable for left-handed and right-handed users more than 10 language packs available to download manual in German and English easy for children to use (incl. child lock) illuminated rotary knob with status detection individual locomotive name per address 2 operating modes for the rotary knob for NMRA/DCC and Motorola operation 14/28/128 speed steps 99 functions per locomotive (F0 to F28 + 60 BS) parallel and serial function data up to 240 locomotive images (narrow gauge and standard gauge) control of 2 locomotives at the same time 2 STOP buttons (programmable STOP commands) radio and cable operation possible (depending on the system) various programming modes display of system power and system load point switching commands (with history) up to 32 routes programmable suitable for the following bus systems*: DiMAX (Massoth), XpressNet V 3.6, LocoNet
On order, lead time to be confirmed
The popular DiMAX Navigator is now available in a bright orange colour variant! It is the central hand controller for your model railway – for driving, switching and programming. With an open radio interface for 2.4 GHz or 433 MHz, plug-and-play retrofitting and full functionality even without a radio module. Stylish, flexible, future-proof – your Navigator, now in orange!
On order, lead time to be confirmed
Facelift version 2021 of the popular 12 ampere garden railway command station with a new power output stage, optimised for operation with the DiMAX 1200T switched-mode power supply, achieving minimal power losses under full and partial load. Adjustable output voltage 14-22 volts; track current 4, 7 or 12 amperes. USB interface for PC control and automation, as well as firmware update for the command station and connected bus components. Supports locomotive addresses up to 10239, 14,28,128 speed steps, parallel and serial functions, F0 to F28 and 99 Binary State functions, automatic functions, etc.
On order, lead time to be confirmed
Z21 START newGen Basic Digital Set. The Z21 START newGen is an entry-level control unit offered at a particularly attractive price. Get started with the Z21 START newGen and a terminal device of your choice: Z21 APP, Z21 multiMAUS or Z21 WLANMAUS. Our other Z21 products are available for expanding your system – get started wirelessly straight away. The app is available for iOS devices in the App Store and for Android devices in the Google Play Store. Features: With built-in Wi-Fi, setting it up and connecting is a breeze! Controls up to 9,999 locomotive decoders Controls up to 100 locomotives simultaneously Controls up to 2,048 turnout decoders Software updates via the new Z21 Suite (further information to follow) Connections: X-BUS USB-C Technical details: Input voltage: 18–24 V Output voltage corresponds to 1 V below input voltage Output current: max. 3 A Analogue locomotives: Not controllable Maximum number of trains: 100 vehicles simultaneously DCC locomotive decoders 14/28/128 speed steps F0 to F31 Read & write POM Main track and programming track are on a single output on the Z21 START newGen, as is familiar from the Z21 START. Contents: 1 Z21 START newGen digital control unit 1 plug-in power supply RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Pre-order, ships on release
Z21 Professional Digital Set with Z21 WLANMAUS newGen. The Z21 digital control centre connects your model railway layout, your digital locomotives and your carriages via Wi-Fi to your tablet, smartphone or the Z21 WLANMAUS newGen. No additional networking knowledge is required for this. You can easily expand your Z21 digital control centre thanks to the wide range of interfaces. This also makes it the ideal basis for PC-based automation. Contents: 1 Z21 digital control centre 1 Z21 WLANMAUS newGen 1 Wi-Fi router 1 mains adapter
On order, shipped within 10-15 days
Z21 WLANMAUS newGen. The successor to the popular Z21 WLANMAUS is here – now with even more ease of use! The Z21 WLANMAUS newGen is a digital controller with which you can control your trains, use digital functions, switch points and signals, programme and much more. It gives you freedom of movement around your layout.
On order, lead time to be confirmed
Z21 multi LOOP The Z21 multi LOOP reverse loop module is ideal for the comfortable and safe operation of track layouts such as terminal loops, triangular junctions and turntables. Operation modes: short-circuit detection - easiest wiring sensor tracks - short circuit free detection switching contacts - detection via circuit tracks or reed contacts combined operation - double safety Compatible with DCC MM RailCom analogue mode Note on sensor tracks / sections! Since sensor tracks / sections are not themselves supplied with power, they must not be too long, especially with regard to short, slower locomotives. Ideally they should be between 4.0 and 5.5 cm long in H0 and 2.0 to 3.0 cm in N. RailCom is a registered trademark of the Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 CAN HUB Additional 2 A power supply for CAN BUS 3 CAN outputs 1 Z-CAN output with booster signal amplification Ideal for large track layouts with many CAN users The package also contains a connecting cable for CAN bus
On order, shipped within 10-15 days
Z21 DETECTOR Track-occupied detector for 8 sections Occupied message by means of power monitoring of track sections RailCom-detector for loco identification when using the CAN bus Connection via CAN bus or R bus Configuration via button or CAN Occupied/feedback with momentary contact Includes connection cable for R-Bus/CAN RailCom is a registered trademark of Lenz Elektronik GmbH.
On order, shipped within 10-15 days
z21 WLAN Package The z21 start can be extended to a network-enabled control center by using Access Point and an activation code. You can easily control both trains as well as turnouts with your Smartphone or tablet via the popular Z21 App. Self-explanatory control functions for your model railway layout (through icons, image integration etc.) You can automate routes Control your locomotives with photorealistic driver’s cabs for the ultimate driving experience – feel like a real locomotive driver It lays the basis for PC guided automations (e.g. with Rocrail®, iTrain®, TrainController® etc. Click HERE for more information! The z21 WLAN Package contains a preconfigured router and the activation code for the z21 start. This way the z21 start can accept commands for locomotives and turnouts via the WiFi interface and process them. Go here for your: Unlock code Info: system requirement is a Windows PC or notebook as well as an existing Internet connection (only for activation of the Unlock code). Please also note our video: Activation of the z21 start with the z21 WLAN package Contents: WiFi Router Switching power supply Unlock code Manual
On order, shipped within 10-15 days