Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Command Stations & Boosters

Filter products
13% off the recommended price
Z21® CAN HUB
Roco 10819
Z21® CAN HUB

Z21 DETECTOR x16 Track occupancy sensor for 16 track sections Occupied signal is triggered by the power monitoring of the track sections Connection via R-Bus Configuration via buttons or POM CV programming

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

12% off the recommended price
DigitalControlCenter Z21R
Roco 10820
DigitalControlCenter Z21R

The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go! Activation code not required! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply 10851 pre-configured WiFi router for Plug & Play operations incl. switching power supply 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shope as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 435.00 RRP CHF 499.90

On order, shipped within 10-15 days

12% off the recommended price
DigitalControlCenter Z21R
Roco 10822
DigitalControlCenter Z21R

The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go ! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply with NEMA connector pre-configured WiFi router for Plug and Play operations incl. switching power supply with NEMA connector 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shop as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 435.00 RRP CHF 499.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 multiMAUS
Roco 10835
Z21 multiMAUS

Z21 multiMAUS Economically priced operating device with many possibilities. Several Z21 multiMAUS devices can be operated on the system at the same time. Brightness-adjustable display. Up to 9,999 locomotive addresses can be operated with direct input; 64 can be stored in a data bank and labeled with names: for example 103RB (103 red-beige). Per locomotive up to 31 functions (including headlights) can be activated if the model has been equipped accordingly. The locomotives can alternatively be operated with 14, 28 and 128 driving levels; on the one hand, this can be set in principle, on the other hand, it can be changed as required for each locomotive. With two different ways of programming you can adjust your locomotive decoder according to your own wishes: The most important CV values from 1 to 5 are accessible with the button combination “MENU” and 1–5, the total of 1024 possible CV values can be addressed with the programming menu. Of course, depending on the decoder configuration, all values up to 255 can be programmed. Readout of CV 1 - 1024 possible in connection with Z21 or readout capable digital control centre. Turnout mode: The Z21 multiMAUS can switch up to 2,048 magnetic devices. These elements have to be equipped with an electric device and be connected to a magnetic device decoder. The programming of the magnetic device decoder is done electronically via the tracks. Supported data transfer protocol: X-Bus 4.0 Slave Firmware updateable Contents: Z21 multiMAUS Connection cable Manual

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 XL
Roco 10870
Z21 XL

Z21 XL Series The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters. The benefits at a glance More output voltage with 6 A at 20 V Control via WLAN provides high range and transmission security Convenient Z21 App and Z21 WLANMAUS for the control of your entire system Included: Z21 XL Series digital control centre Power supply unit and cable 6 A 20 V (10857) WLAN router & power supply unit

Selling price: CHF 608.00 RRP CHF 699.00

On order, shipped within 10-15 days

15% off the recommended price
Mobile Station
Trix 66955 Scale H0
Mobile Station

Model Digital DCC hand controller unit. 40 locomotives can be controlled with direct access. Up to 32 locomotive functions and 320 solenoid accessories can be controlled. The function statuses are shown on the integrated backlit black-and-white full graphics display. Integrated locomotive card reader. Red illuminated stop button. 1.9 A power section in the optionally available track box (60116 or 60113). 2 Mobile Stations (60955) can be connected directly to one track box (60116 or 60113); they then work together in master-slave mode. By using MS II hubs (60122) the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 as well as 60214-60215), the Central Station settings (the complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations) can be accessed. Dimensions 160 x 100 x 39 mm. Highlights DCC control unit for simple, comfortable operation Backlit graphics display with self-explanatory pictograms Up to 32 controllable additional functions. 320 solenoid accessories can be controlled Integrated locomotive card reader Simple wiring (Plug & Play) to the track box and the Central Station

Selling price: CHF 106.25 RRP CHF 125.00

On order, shipped within 10-15 days

10% off the recommended price
IB MultiControl
Uhlenbrock 19200
IB MultiControl

Two control panels are available for controlling the locomotives. The keyboard is used to switch all points and signals. LocoNet and s88 return modules can be monitored, and return signals can be triggered manually. The built-in route control system, with up to 200 routes of 50 commands each, can be used independently of the central station and also works with the Intellibox Basic, which has no built-in route memory.

Selling price: CHF 35.90 RRP CHF 39.90

On order, lead time to be confirmed

10% off the recommended price
IB-MultiControl additional licence
Uhlenbrock 19210
IB-MultiControl additional licence

Two control panels are available for controlling the locomotives. The keyboard is used to switch all points and signals. LocoNet and s88 return modules can be monitored, and return signals can be triggered manually. The built-in route control system, with up to 200 routes of 50 commands each, can be used independently of the central station and also works with the Intellibox Basic, which has no built-in route memory.

Selling price: CHF 22.90 RRP CHF 25.60

On order, lead time to be confirmed

Intellibox Power 3 plug-in set (until end of September 2003)
Uhlenbrock 61040
Intellibox Power 3 plug-in set (until end of September 2003)

Item no. 61040 Plug-in set, replacement for Intellibox 650, 65000, 65050, Power 3 (until end of Sept. 2003), TwinCenter

Selling price: CHF 12.90 RRP CHF 14.30

On order, lead time to be confirmed

Plug-in set for Intellibox 3, Intellibox 2neo
Uhlenbrock 61065
Plug-in set for Intellibox 3, Intellibox 2neo

Item no. 61065 plug-in set, replacement for Intellibox 3 and Intellibox 2neo

Selling price: CHF 8.30 RRP CHF 9.20

On order, lead time to be confirmed

DAISY II DCC digital set
Uhlenbrock 64300
DAISY II DCC digital set

The DAISY II digital starter set is a digital entry-level system for the ambitious model railway enthusiast. It consists of a DAISY II hand controller and a DCC Central Station, which are connected to each other via a LocoNet cable. It supports all the functions desirable for comfortable model railway operation.

Selling price: CHF 249.00 RRP CHF 276.20

On order, lead time to be confirmed

DAISY II radio set
Uhlenbrock 64400
DAISY II radio set

Future-proof! The radio system can be expanded via software. With the expansions, it is possible to control vehicles with corresponding radio receivers directly in DCC format via the radio master. The DCC command no longer needs to be transmitted to the locomotive via the track. This allows, for example, the locomotives of the garden railway or the vehicles of the Faller Car System to be controlled directly.

Selling price: CHF 498.00 RRP CHF 553.30

On order, lead time to be confirmed

Upgrade Software 2.0
Uhlenbrock 65020
Upgrade Software 2.0

Extension of the system software for the Intellibox and Intellibox IR Upgrade 2.0 is an extension for all Intelliboxes with article numbers 650, 65 000 and 65 050 that were delivered with a system software version lower than 2.0. It provides the following new functions: 10 000 special locomotive functions With suitable DCC decoders, the special functions f0–f9 999 can be accessed. Locomotive selection from the refresh cycle The refresh cycle contains all locomotive addresses that are currently being supplied with digital information by the Intellibox. The new software provides a selection list of these addresses from which the desired locomotive can be selected directly. Lokfind function As soon as a locomotive with a DCC decoder is placed on the programming track, the decoder's locomotive address is automatically transferred to a speed controller. Reloading the locomotive addresses The locomotive addresses shown on the Intellibox display are, if desired, saved when the operating voltage is switched off and are immediately available again for the next running session without annoying re-entry. Halt mode The Intellibox can be put into halt mode using the STOP and GO buttons. All locomotives are stopped by emergency stop, while the track voltage is maintained. Points and signals can still be changed. Using the Intellibox as an IB-Control The Intellibox can be set via the device configuration so that it behaves like an IB-Control. This makes it possible to use two Intelliboxes together on one layout. Route control On all devices without route control, the system software is additionally extended with the ability to switch up to 48 routes. mfx special functions mfx locomotives are controlled via the Intellibox using the Motorola data format. If a locomotive has more than four special functions, the special functions f5–f8 are automatically controlled via the following decoder address. The upgrade software is available free of charge on the Internet for owners of the Intellibox IR. For older devices the software can be purchased. Art. no.: 65020 Upgrade Software 2.0

Selling price: CHF 26.90 RRP CHF 29.60

On order, lead time to be confirmed

10% off the recommended price
RailCom extension for Intellibox, IR
Uhlenbrock 65030
RailCom extension for Intellibox, IR

Suitable devices for the RailCom extension 65030 Intellibox I art. no. 650 and 65000 Intellibox IR art. no. 65050 Intellibox Basic art. no. 65060 IB-COM art. no. 65070 and 65071 Power 3 art. no. 656 and 65600 Power 6 art. no. 65650 Fleischmann Twin-Center art. no. 6802 Fleischmann Twin-Booster art. no. 6807 Piko Power Box art. no. 55015 The RailCom extension 65030 is a circuit board (not illustrated) that is retrofitted to the digital command stations listed above. It ensures that the cutout required for RailCom operation is also transmitted. Installation is only possible at our factory. The device must therefore be sent to us for modification. Attention: for installation, the digital command station must be sent to us. Postage costs for returning the modified command station to you are charged in addition. Art. no. 65030 RailCom extension

Selling price: CHF 63.90 RRP CHF 71.20

On order, lead time to be confirmed

Intellibox 3
Uhlenbrock 65300
Intellibox 3

Intellibox 3 Proven features combined with innovative technology In appearance, the large, high-resolution colour display with touch function stands out. With the new operating options we have strictly continued and simplified the operating concept. Anyone who knows the Intellibox II will immediately feel at home with the Intellibox 3. It goes without saying that you can continue to use our previous devices in conjunction with the Intellibox 3. The speed display of the vehicles can be shown in speed steps, as a percentage of top speed and also in km/h. Up to 32 768 special functions per locomotive address can be switched. In combination with LISSY or MARCo, you can have the position of your train on the layout displayed. Another highlight is decoder programming in plain text. For programming the standard CVs in DCC format, the annoying search for the locomotive decoders' operating instructions is therefore no longer necessary. The bit calculation aid simplifies the programming of special CVs. The detailed help function, a model time clock and a booster mode complete the Intellibox 3's range of features. As ever: everything in one box With the Intellibox 3 you are completely equipped for digital operation. The Intellibox 3 can be operated on 2-rail and 3-rail layouts. From gauge Z, via N, TT and H0, right up to the large gauges 0, 1 and IIm(G), the Intellibox 3 is the right command station. It supports up to 128 speed steps and 9 999 decoder addresses. Locomotive and function decoders in DCC, mfx®, Motorola or Selectrix® format. Point and switching decoders in Motorola or DCC format from different manufacturers can be used at the same time. A single device provides you with the following components of a digital system: central unit, booster, two speed controllers, keyboard, programmer, interface, feedback monitor, route control, model time clock, RailCom® receiver, computer connection via USB or WLAN and the LISSY/MARCo mode with the DirectDrive function. The integrated infrared receiver allows direct use of the existing IRIS infrared remote control. Art. no. 65300 Intellibox 3

Selling price: CHF 698.00 RRP CHF 775.10

On order, lead time to be confirmed

IB-Control 3
Uhlenbrock 65430
IB-Control 3

Is your command station too far from the shunting yard? Would you like to have more locomotives permanently at hand? Do you need more routes? You need the IB-Control 3 Fine prospects The new IB-Control 3, as an additional control unit, turns any LocoNet command station into a modern control system with all the operating convenience possible today. It extends any command station with two further speed controllers with locomotive selection via locomotive names stored in a database, a control panel with symbols for points and signals, as well as monitoring options for feedback detectors and LISSY/MARCo receivers and a model time clock. Each IB-Control 3 extends the digital control by 128 routes with 40 entries each, which can be called up at the press of a button or triggered by feedback from the train. The routes can be interlocked with one another. With the large, high-resolution colour display with touch function and a backlit keyboard in night design, model railway fun with the new IB-Control 3 for all LocoNet command stations is only now really getting started. Art. no. 65430 IB-Control 3

Selling price: CHF 498.00 RRP CHF 553.30

On order, lead time to be confirmed

DAISY II radio module
Uhlenbrock 66310
DAISY II radio module

Radio module for DAISY II. This module allows the DAISY II handheld controller 66300 to be upgraded to a radio handheld controller. The Funk-Master is additionally required for radio operation. Installation is described in the manual of the DAISY II handheld controller. With charging adapter.

Selling price: CHF 139.00 RRP CHF 154.30

On order, lead time to be confirmed

10% off the recommended price
Daisy comfort support
Uhlenbrock 66320
Daisy comfort support

Plexiglas mounting bracket for screwing to the edge of the layout. With cable holder.

Selling price: CHF 8.80 RRP CHF 9.80

On order, lead time to be confirmed

Radio master LN
Uhlenbrock 66400
Radio master LN

The Funk-Master is the system's radio control centre. All radio operations are coordinated and executed within it.

Selling price: CHF 219.00 RRP CHF 242.90

On order, lead time to be confirmed

New
DCC digital command station with WLAN and LAN
YaMoRC YD7010
DCC digital command station with WLAN and LAN

Building on the immense succes of our YD9401 upgrade for the DR5000, we decided to bring a complete Command Station, the YD7010, that includes the proven YD7001 technology and YD9401 Network Module. The command station is based on the technology used in our YD7001-E, but with a completely new designed mainboard, with improved component choice and PCB layout to render robustness and extended functionality. Of course the YD7010 comes with our YD9401 is pre-installed. Further we improved some visual and usability aspects: Different colors for the RJ connectors which were easy to confuse when they were all gray. Now the XBus and Network sockets have different colors to the ES-Link/s88N, LocoNet and BBus connectors. On the front we moved the GO- and STOP-LEDs to be in-line with all LEDs and that prevents touching and/or damaging the LEDs when operating the pushbuttons. On the back we moved the RS-Bus and Program-Track terminals into one 4-way block. This effectively prevents the terminals of turning and, worst case, shearing off ! The product placement of the YD7010 in our portfolio is meant to be an Entry Level, yet very complete and versatile DCC command station. A summary of the presented features: - Unique DCC signal generator: – With priority control and interleaved packet generation. – Changes sent by any interface are directly being reflected to the track. – Generates RailCom Cut-Out. - 3 A integrated Booster - Operating voltage range from 15 – 19 VDC. Giving a track-voltage of 13.8 – 17.8 Volts. That means safe for your N-scale equipment and powerful for H0. - Multiple Model Railroad compatible Interface Busses: – LocoNet, the world standard set by Digitrax Inc. – XpressNet, from the inventor of DCC: Lenz – Good old S88 signalling, fully compatible with ES-IN-Link by use of our YD6902ES-EXT adapters. - USB interface for three virtual COM-ports: – YD.Command ** – LocoNet – XpressNet The USB connection can also be used to update the YD7010`s firmware - Full network capabilities: – WiFi Access Point, gives direct access to smartphones, tablets and handheld controllers – 100baseT RJ45 wired network socket, connect and bind to your home network and reliably connect your PC software - By means of the built in YD9401 Module which provides: – 6 different but SIMULTANEOUS usable network protocols on WiFi and LAN: * XpressNet-LAN, * Z21®, * LocoNet Binary, * LocoNet LBServer, * JMRI: WiThrottle * YD.Command ** - Booster Interface by LocoNet-B with strong, 800mA LocoNet RailSync signals - Handcontroller, feedback modules etc. interface by LocoNet-T with strong, 800mA 12VDC power supply - Powerful 1 Amp XpressNet supply - Roco R-BUS compatible feedbacks on XpressNet socket - Roco B-BUS for compatible boosters on RJ10 socket - Lenz RS-BUS compatible feedbacks - Infra-Red sensor for the use of IR-based remotye controllers like the Uhlenbrock IRIS or the Piko DigiFern - Clear LED indicators - Programming: – POM write – Service Mode ( programming track ) – ES-Link capable modules like YD8044, YD8008, YD8116, YD6016ES, YD7403 - Additional extra purchasable , quality made, YaMoRC spec, switch mode power supply with choise of: – 15V fixed / 4 A – 18V fixed / 3.3A **) Disclaimer: YD.Command is the internal YaMoRC communication protocol. It is not publicly open, nor does YaMoRC supply support 3rd parties to use it. Futher can it be subject to change on demand and at will of YaMoRC, without further notice or explanation.

Regular price: CHF 255.00

On order, shipped within 3-8 days

DCC booster, 3.5 A
YaMoRC YD7403
DCC booster, 3.5 A

The YD7403 is a pure DCC booster with 3.5 A peak current and 2.75 A continuous current, which passes the RailCom cutout of the input signal to the output. The LocoNet B, Roco B-Bus, CDE and Track Sniffer inputs are galvanically isolated, the active signal source is automatically selected and indicated by an LED. The booster can be switched on and off and reversed via a DCC accessory address and reports its status via LocoNet. Short circuits are reported via LocoNet, CDE or B-Bus. Configuration is carried out via ES-PGM Link, for example with the YD9100. The power supply is provided by a DC voltage power supply unit with 15 to 19 V. Output 3.5 A peak, 2.75 A continuous Input 15 to 19 V DC, max. 60 W Short-circuit proof Body 84 x 88 x 22 mm

Regular price: CHF 107.00

On order, shipped within 3-8 days

Switched-mode power supply, 18 V DC, for booster and central station
YaMoRC YD7460-18
Switched-mode power supply, 18 V DC, for booster and central station

The YD7460-18 is a switched-mode power supply providing 18 V DC voltage and 3.3 A for YaMoRC digital central stations and boosters, for example the YD7010 or YD7403. For the turntable control YD7652, it is recommended as the power supply in the manual. The power supply is double-insulated (protection class 2), short-circuit and overload protected, and does not heat up when the central station or booster is idling. It has a compact design and a two-core low-voltage cable instead of a thin coaxial cable. It was manufactured in accordance with the manufacturer's specifications to suit the YaMoRC boosters and central stations. Output 18 V DC, 3.3 A Safety class 2 Short-circuit and overload protection

Regular price: CHF 37.50

On order, shipped within 3-8 days

Network/Wi-Fi upgrade module for DR5000
YaMoRC YD9401
Network/Wi-Fi upgrade module for DR5000

The YD9401 is a retrofit module that replaces the RM04 WLAN/LAN module of the Digikeijs DR5000 digital central station. Together with the associated firmware, the DR5000 is converted into a YD7001 central station. The module provides a WLAN access point without an external router, a 100baseT LAN connection, and a built-in web server for configuration in a browser. The XpressNet-LAN, Z21, LocoNet Binary, LocoNet LBServer, and WiThrottle protocols can be used simultaneously via WLAN and LAN. The installation can be carried out by the user; a licence key must be requested by email to activate the module. Opening the DR5000 voids the Digikeijs warranty. Replacement for the DR5000 RM04 module WLAN access point and 100baseT LAN Configuration via web browser Installation requires: Windows PC, USB cable, cross-head screwdriver

Regular price: CHF 64.00

On order, shipped within 3-8 days

DCC digital command station based on DR5000, revision E
YaMoRC YD7001-E
DCC digital command station based on DR5000, revision E

The YD7001-E is a pure DCC digital command station with a 3 A output current and RailCom support. It is based on a brand-new, revised DR5000 main board with a pre-installed YD9401 network module, and it additionally measures input and track voltage. It controls up to 117 locomotive addresses and 2048 accessory addresses and supports DCCext. Connections: LocoNet T and B, XpressNet, Roco B-Bus, RS-Bus, S88 ES-Link, a fully functional programming track, USB, LAN and WLAN access point. In the network, the Z21, WiThrottle, LocoNet and XpressNet protocols are available. An IR receiver allows remote controls such as Uhlenbrock or Piko DigiFern. Formats such as mfx and Motorola are not supported. Track output 3 A Power supply 15 to 19 V DC, max. 3.5 A Programming track max. 750 mA Housing 157 x 88 x 22 mm

Regular price: Price to follow